gji25
5th June, 2010, 05:02 PM
any one help with this problem... dish and motor and pole all set up correctly ? and pointing due south.(motor set to zero) using a dm500hd reciever.
have put my cordinates in the setup for usals... ok now when i tune to astra/hotbird 28.2e the dish moves east like it should do but stops on about 36 degrees east... i have to then inch the motor back 8 degrees to the west by using the manual movement button on the motor... any help with this would be appreciated .
__________________
dm500hd-1.1m triax td-ivacom lnb-tm2300 motor
have put my cordinates in the setup for usals... ok now when i tune to astra/hotbird 28.2e the dish moves east like it should do but stops on about 36 degrees east... i have to then inch the motor back 8 degrees to the west by using the manual movement button on the motor... any help with this would be appreciated .
__________________
dm500hd-1.1m triax td-ivacom lnb-tm2300 motor