Audi V6 3,0TDI Particle Filter DPF Reseting

[daniellol]

Hello. I need help. I have replaced the DPF filter in Audi 3,0 TDI. Does everybody know reseting procedure in VCDS ? I know the emergency regeneration procedure, but I don`t know the reseting procedure. When I put the 10016 login engine doesn`t increase rpm speed. There are no fault codes. Please help me.

[lolo.lolo]

hi

..."If the Particle Filter Load is above 68g the Particle Filter needs to be replaced since the car may burn down when regenerating. "

;)

have fun!

[easytech]

DPF filter load has to be reset in the dash, this only works with the original tester at the dealer.
Maybe VASPc will work also I don't know.

[dimitar]

If you have VCDS you can regenerate just follow the procedure from wikirosstech

[silwanitg]

3.0l V6 TDI (BKS/BMK/BUN) - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/3.0l_V6_TDI_%28BKS/BMK/BUN%29#Particle_Filter_Emergency_Regeneration)

[daniellol]

The solution is put value 0 in 81 and 83 long adaptation channel or rewrite existing value, then go to normal DPF regeneration procedure.

[Alex789]

The solution is put value 0 in 81 and 83 long adaptation channel or rewrite existing value, then go to normal DPF regeneration procedure.

You mean adaption channel in 01 engine, didn't it?

[daniellol]

Yes in 01 engine .