1996 micra 1.0 immo off?

[obdmaster]

Can someone please help with immo off solution for 1996 micra 1.0 immo off solution. files are attached.one original and one cleared by otocheck. but vehicle wont run , i have already unplugged immobiliser unit prior to fitting modded file to ecu. But no joy .
Ecu is bosch 0 261 204 243.

Please can someone help me.

[joubliss]

hi m8, ur dump is cleared

0000 0000 001C 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF

try to diagnos the carn if there is other problems......

[obdmaster]

Mil light flashes still m8, which signalises im*obiliser issue, car runs for around 5 secs cuts out, typical immobiliser problem, even with file cleared loaded?
Am i doing something wrong here lads?:giveup:

[autodiag1]

try this one i had lots of problems with this befor

unplug immo box befor fitting ecu

[umoussa]

try this one i had lots of problems with this befor

unplug im*o box befor fitting ecu


You are giving him the same file he has :)

[obdmaster]

try this one i had lots of problems with this befor

unplug im*o box befor fitting ecu


Put your file on new 93C46 and vehicle runs, mil light flashes but vehicle runs, thanks to all.

[dod]

same problem with micra and 93c46, allready try clear dump from immo cleaner 2 but still not working and I want to ask how u programing it, like 8bit or 16bit? I'm using UPA, thanx!

[JIMMYQ]

hi guys i know its an old thread but ive got same problem read and wrote to the dump perfect disconnected immobiliser box plugged ecu in but cant wont start any ideas? wierd:hmmmm2:

[JIMMYQ]

Hi tried it on 2 ecu's now still no joy disconnecting immo box first too does it have to be a new 93c46 chip ??

[Meat-Head]

Put your file on new 93C46 and vehicle runs, mil light flashes but vehicle runs, thanks to all.

CONFIRMED - gave up with original chip - think my reader/writer,
one of them Poundland things.

Used a 93C86 - worked perfect



Hi tried it on 2 ecu's now still no joy disconnecting immo box first too does it have to be a new 93c46 chip ??


See above wording

[cleevesy]

Have tried this on 1999 micra wrote to new 93c46 and vehicle will not start , it has a nats 5 type immo box which fits round the ignition anybody bypassed the immo on these???

[Meat-Head]

just leech it

http://www.digital-kaos.co.uk/forums/f178/need-immo-off-nissan-micra-1999-93c46-125342/index2.html#post970530

[cleevesy]

have tried that bud it wont work, going to grab an ecu from an older vehicle in the morning and try a file in that see if it works. seems strange

[Meat-Head]

you DID SKANK the loop around the colon?

Also what makes you say immo?

[cleevesy]

Ok sorted this If you have identification/software code YW immo off is not possible , so went to the scrappy and got and older ecu with identification/software code XR wrote file vehicle started fine and removed immo module as standard.

Hope This Helps

[garagetech]

Put your file on new 93C46 and vehicle runs, mil light flashes but vehicle runs, thanks to all.

hi obdmaster can you tell me where you got this chip from was it a 93cs46 or a 93c46 , help will be appreciated need to move this car please

thanks:ciao: