The Box Super USB 1.05 Beta Firmware Release

[satsmo]

This is the latest firmware release for the Starview 4. Now has EPG timer facility.

You will find an external link to download it here Digital Kaos - Downloads - The Box Super USB Version 1.05 (http://www.digital-kaos.co.uk/forums/downloads/starview/23/box-super-usb-version-1-05-413/)

[nsw9154]

Thank you satsmo - just downloaded it but it comes down as - track 1 788kb bin file have i done it right i downloaded it again and it came down as session 1 788kb bin file i had to open it with iso buster - i am confused i should receive my replacement SV4 in a couple of days and i dare not install it incase i have done something wrong

[shami232]

Hello mate
I just load your new software for starview 4 .But the problem is still there I mean the bad picture quality.Is it a faulty box or is it still down to software.Thanks


This is the latest firmware release for the Starview 4.

You will find an external link to download it here Digital Kaos - Downloads - The Box Super USB Version 1.05 (http://www.digital-kaos.co.uk/forums/downloads/starview/23/box-super-usb-version-1-05-413/)

[satsmo]

Thank you satsmo - just downloaded it but it comes down as - track 1 788kb bin file have i done it right i downloaded it again and it came down as session 1 788kb bin file i had to open it with iso buster - i am confused i should receive my replacement SV4 in a couple of days and i dare not install it incase i have done something wrong


I check every file I upload, by downloading it from here to make sure they have upped OK. The file is a bin type which you put onto your USB memory stick along with the logo file, (you will find the logo and recording programs on the 1.02 download).

[satsmo]

Hello mate
I just load your new software for starview 4 .But the problem is still there I mean the bad picture quality.Is it a faulty box or is it still down to software.Thanks

Could be down to cabling issue also. Are you scanning from the direct feed or via a splitter?

[tiderium]

whats new in the firmware?? sorry its blunt and to the point!

[satsmo]

It now has Chorus support for scanning. And it also has a timer now for recording from EPG. Messed up my categories a bit now have all movie channels in music? Small thing and not much to worry about.

[satboy]

anyone seen a change log for v1.05 knocking about that you can point me to?

i'm fine with all channels etc...just wondering if new software might start to fine tune those little details that will make the user interface a joy to use. You know, features like adding reminder functionality within EPG...

[satsmo]

It has a timer now for recording from EPG.

[xman01]

Hi, is there a screan shot of the epg from this firmware?.
Will it ever get some sort of series link.

[nsw9154]

Thank you satsmo for your reply - i know that you would not send any thing down that was not right - i was just making shure that i had downloaded the right file and that i had not messed it up

[thewizardofodds]

Just installed it seems to be working great.
One new thing I noticed was the channel scan. before when I scanned it says on 17% for a while, at first i kept rebooting as I thought it had froze but with this firmware the status bar keeps moving so will stop people thinking it had crashed.

[thewizardofodds]

whats the record button?

[thewizardofodds]

the SORT and MOVE option in CHANNEL EDIT cant be selected in this new version

[tolien]

why cant i download it, it says i dont have permission

[thewizardofodds]

try reading the forum rules and you might find out mate

[vrlika]

do we update it with 1.05 bin then with logo 1.02 ???or we dont need logo bin file with this version ?
thanx

[thewizardofodds]

do we update it with 1.05 bin then with logo 1.02 ???or we dont need logo bin file with this version ?
thanx



i just flashed the 1.05

[vrlika]

thought so. cheers

[vrlika]

bootup picture is still stuck on 4:3 mode thou

[satsmo]

Small thing its only a boot screen though and as such I wouldnt worry about it. The ability to set a recording from the EPG was the main thing that was missing at least it has that now.

[vrlika]

yeah of course. cheers

[satsmo]

I can bring it up at the next meeting though :) Joking of course hope its working well for you.

[deeman]

Thanks for this. Didnt want to get a starview until this new firmware was released.

[shami232]

I got two box one is starview and 2nd one is starview4 so I am using the splitter .starview is working fine but starview 4 is just rubbish.Is there is any way to get both one work fine.Thanks

Could be down to cabling issue also. Are you scanning from the direct feed or via a splitter?

[lamby]

Anyone any ideas how you record using the EPG. I have tried all the coloured buttons

[thewizardofodds]

Anyone any ideas how you record using the EPG. I have tried all the coloured buttons


record button at the bottom

[lamby]

thanks works I was selecting what was already on so it just started !!!!!!

[damaster]

thanx
lads ill see if it works

[xboxmodifier]

hi, just select the program you want in the epg and press the record button on the bottom of the remote... awesome

[steve2008]

Hi all,

It seems to me that the loss of picture can be brought about by changing channels repeatably, once the picture goes the only solution is a power off restart, seems the same on 3 boxes all with ver 1.05. the loss of pic is only on PPV channels not FTA.

otherwise a good box, maybe future firmware may make it better.

stevo

[jim3778]

hi i am new to this site and i tried to download the software but it says i dont have access for this

[satsmo]

Wait 10 minutes or so.

[dfmears1108]

Is this the new download since they all went off.

[satsmo]

No but there should be a new patch soon.

[djbillyb]

cant seem to d/load this plz help?

[papazito]

hello guys, I am happy to join you as a new member.
thanks to all of you for you good works.

[blair]

Satismo, when you say there will be a patch soon, does that mean I do not need to try to enter keys manually and stuff? My box has been off for a few days now with the "updating data" message on screen. Will the patch fix this problem?? By the way, thatnks very much for the firmware and all the help. Its appreciated.

[dadon123]

thanks for this.. gna try it out nw!

[scjgreen]

This file is not a fix for the Keyroll problem, that will be along when it's ready

[firehousedog]

thanks for all your help

[tony_i]

In regard to the new recording feature, it looks like it's not possible to schedule a recording beyond midnight on the day you're watching.

Am I right about this?

[shady54321]

hi their new to al this what do i do now

[jonoc]

hi all am new to this tanx for all the help would be lost without it

[jonoc]

i am getting my box4 usb 2mrw and would appreciate if someone could help me out do i just download the v1.05 version or do i need the v1.02 also thanx guys

[thewizardofodds]

i am getting my box4 usb 2mrw and would appreciate if someone could help me out do i just download the v1.05 version or do i need the v1.02 also thanx guys


just load the 1.05 mate.
you'll have to update the keys manually though. Full instructions are on here.

[louigspec]

Does this new firmware fix the issue with the box going down recently or do i still ne a keymaster for the starview 4 box?

[Prakman]

This is the latest firmware release for the Starview 4. Now has EPG timer facility.

You will find an external link to download it here Digital Kaos - Downloads - The Box Super USB Version 1.05 (http://www.digital-kaos.co.uk/forums/downloads/starview/23/box-super-usb-version-1-05-413/)

Hi,

I have both Starview 3 & 4 boxes and need a new release, Can you give me access to your downloads??

Thanks

[louigspec]

Has anyone got the new key master codes or updates for the starview 4 box? I got my starview 1 box up & running again but #4 still down?

[careyrolland]

hi all just downloaded this fix but still no premium channels is there a further download or have i done somthing wrong thank you, paul sorry all never switched on the data code

[pinkpheonix]

i to have the same problem,downloaded the fix but not receiveing all the channels. any ideas????

[lemmy]

christ knows whats going on , i have the same problem.
lemmy

[pinkpheonix]

hi all just downloaded this fix but still no premium channels is there a further download or have i done somthing wrong thank you, paul sorry all never switched on the data code


hi i have the same problem could someone tell me how to switch on the data code so i may try this thanx

[lemmy]

hi i have the same problem could someone tell me how to switch on the data code so i may try this thanx

apparently the spike that was sent out last week , disabled the boot menu on
the boxes ( whatever this is), untill a fix is available for the sv4 , sit tight and wait.
cheers
lemmy

[Prakman]

Hi thanks for the attached.

Sorry to be a pain, not being IT literate, how do I get this on to my box?

[petetidmarsh]

how do i gain priviledges to download?

[jordan]

how do i gain privelages to download plz

[les123]

Hi there! got the box super usb up and running... channels working gr8!! thanks!!
only two problems...
1) The sort/move option in channel edit is highlighted out and can't access these two options. I have searched the net for answers but no avail, can anyone plz shed some light?
2) Will I keep having to set the audio everytime I change a channel?

Any help would be muchly appricated! Thanks

[nsw9154]

:wavey: i downloaded and instaled this on wednesday - and just watched the BOXING no rollerounds or having to update codes so -- as far as i am concerned this fix is BRILL :cheer::unionflag::thrasher:

[djbillyb]

hi ppl seen ppl asking about sound lost on sv 4 super usb i was having same prob ..... turn off box from bk 4 a few secs then turn it bk on this worked 4 me hope this helps :party :

[Mark79]

Great stuff, your effort is much appreciated.

Wish I saw this before the boxing at the weekend, but c'est la vie.

[bigfella]

if u press audio on ur remote and move down and press ok ...sound shud come back on ... hope this helps ..big

[jimren]

cheers mate gonna try this one

[freshy31]

do i needto download this update to get to the secret page? ive tried entering 1570 on the menu screen and nothing happens?

[OO7BOND]

This is the latest firmware release for the Starview 4. Now has EPG timer facility.

You will find an external link to download it here Digital Kaos - Downloads - The Box Super USB Version 1.05 (http://www.digital-kaos.co.uk/forums/downloads/starview/23/box-super-usb-version-1-05-413/)

latest version is not 1.05 its 1.07 works fantastic

[OO7BOND]

the latest version for starview 4 is not 1.05 its 1.07 and i have it "superb"

[satsmo]

Did you look at the red stickies above the ones I usually update :)

[shadowstill8]

This is the latest firmware release for the Starview 4. Now has EPG timer facility.

You will find an external link to download it here Digital Kaos - Downloads - The Box Super USB Version 1.05 (http://www.digital-kaos.co.uk/forums/downloads/starview/23/box-super-usb-version-1-05-413/)

Any links for firmware?. Thank you ALL

[torrne666]

how do i download this?

[camelv]

as satsmo says look back on the thread for the latest update go to the red stickies at the top of the starview forum .
you may have to wait to d/load for about 10 to 15 mins while server updates .

remember dont just hit and run be part of this great community.

[Derek Prophet]

hello i have a starview 4 the box super usb. ihave v1.06 installed.

I have the keys updated to 07/05/09 for Telewest area.

The box is still not working ??

any thoughts pls help!!!

[mtv1]

v 1.07 m8 in downloads

[Emile Austin]

You should be able to download it now after 2 posts. Give it a go once more and you'll see.:cheer:

[john john]

i dont know

[gazza2008]

i dont know


wot dont u know m8

[peterg65n]

help canu you tell which box i have and what software i need system the box api ver 4.50e boot ver 7.0 5 july 2007 sorry if im messing up but i am new to this thanks in advance

[khenryashley]

help canu you tell which box i have and what software i need system the box api ver 4.50e boot ver 7.0 5 july 2007 sorry if im messing up but i am new to this thanks in advance

You have The Box Starview 2. You need firmware 4.57 and loader. See red stick's at top of page.
You would have been better starting a new thread for this.

[ajohn]

does this software allow you to sort and move channels on the box super usb?

[khenryashley]

does this software allow you to sort and move channels on the box super usb?

The SV4 sorts the channels into category's for you. I.E films. sport etc. You cannot resort them only delete them

[mikeyboy]

This is the latest firmware release for the Starview 4. Now has EPG timer facility.

You will find an external link to download it here Digital Kaos - Downloads - The Box Super USB Version 1.05 (http://www.digital-kaos.co.uk/forums/downloads/starview/23/box-super-usb-version-1-05-413/)
i carnt downloaD DAM IT

[mikeyboy]

THANKS
FOR HELP WITH THIS AS I AM NEWBE AND THIS IS A [PAIN IN THE ARSSSSSE

[gerald5445]

hi i have starview box 4 usb works fine..
The Box Super USB 1.05 Beta Firmware Release do i need ti instal this if my box works fine? :party:

[smirnoff_rules]

u mean u have 1.07 ? check menu system info m8

[maca]

hi i have starview box 4 usb works fine..
The Box Super USB 1.05 Beta Firmware Release do i need ti instal this if my box works fine? :party:
as the saying goes m8 if it aint broke dont fix it lol . no m8 you dont .....

[gerald5445]

u mean u have 1.07 ? check menu system info m8
no m8 its not 1.07 but works fine thanks m8 for your help
thinks its 1.05?:beheaded:

[gerald5445]

it says sw 1,12
boot b-12 hope this helps:party:

[smirnoff_rules]

thats why its working ,, but in the uk 1.07 is better and the recording is better to , theres a few bugs with 1,12

[Billy1986]

Hi, What do i need to do to get every channel when i buy a starview 4?

[boomer39]

READ... LET US KNOW WHERE YOU ARE, AND .dont shout...

[mrtrfc]

Where can i find the Latest software for starview 5? thanks