wot is the best programmer for the 5p08

[deneo]

as the willem i have will not write the 5p08 but wiil read it fine
can any 1 help thanks

[tachonow]

as the willem i have will not write the 5p08 but wiil read it fine
can any 1 help thanks
Try Upa usb from Elrasoft.

[AlfaRed]

as the willem i have will not write the 5p08 but wiil read it fine
can any 1 help thanks



I use wellon 480 is low-cost and goes well!

[maaxxyy]

I use GQ-3X

[Dane-Elec]

Use BeeProg + is the best .

Dane

[franavs]

i used batronix .bp32p is cheap , work to usb , no need external power suply , the software automaticaly update , and ,... 3 year with me . 0 problem

[key-maker]

try carprog it is the best can read all onboard

but for 5p08 you must desolder it to program

[kentzee]

try UPA or X-prog M
MBS Tuning Sdn Bhd (http://www.mbstuning.com/electronic.htm)

[carsolution]

Hi have Beeprog and Batronix BX40.
To be honest I bought Batronix for experience, I never thought it was so good, at this moment I use Batronix only and Beeprog is disconnected.
Batronix BX40 is very cheap and you can read almost everything with, dont need to spend a lot of money buying Beeprog (but it is the best in the market).
For your specific case you can use a simple programmer device like UPA that is cheap.
The other programmers, I told just because they ar very complete and cover a lot of other devices you probably will need to work in the future.
For example the Batronix Bagero 40 costed me 250€ with transpot to POrtugal included.
This is my opinion, my friends can have others but is because of that this a forum were friends are changing ideas and advices.
Best Regards,
Nuno

[damih]

Hello,i have a seeprog very good