2000 mercedes sprinter start error

[obdmaster]

I have just been out to a 2000 mercedes sprinter 313CDI, WDB903 with start error.

Diagnostic check on engine ecu, had p1481 glow plugs for cylinders 1,2,3,4.

Cleared faults. Start error remains on dash, and all faults re-appeared.

Is it because of glow plugs, i have start error and no crank, or do i have immo problem, but no fault codes in ecu relate to immo?

Unfortunately i have no merc star, and was unable to speak to immo control module.

Any help and advice is much appreciated.

[alexics]

I have just been out to a 2000 mercedes sprinter 313CDI, WDB903 with start error.

Diagnostic check on engine ecu, had p1481 glow plugs for cylinders 1,2,3,4.

Cleared faults. Start error remains on dash, and all faults re-appeared.

Is it because of glow plugs, i have start error and no crank, or do i have im*o problem, but no fault codes in ecu relate to im*o?

Unfortunately i have no merc star, and was unable to speak to im*o control module.

Any help and advice is much appreciated.

Is it an IR starter?

[alexics]

It should look like this inside. They have problems associated with them.

[mercis]

w903 dont have eis,picture is from 906

[tachonow]

You must clear ecu eprom and immo box mcu eprom.

[r-parts]

open ecu, look at 3 big blue capacitors, if one is broken thats the cause