PDA

View Full Version : EDC 17 help



aeroyas
11th June, 2010, 07:20 PM
hi all, i just have a question about EDC17 from vag group, i have an audi A3 year 2009, with EDC17 ecu, i just want to know how to read this ecu ? and which eeprom inside ? is there any soft to make this ecu off?? thank's a lot in advance

Goups
11th June, 2010, 07:44 PM
The first generation of this ECU can be read through OBD.
The second generation can currently be read only by boot mode.

No soldering can be done. It's not just an eeprom, but a TriCore processor (external or internal memory)

There is not a lot of tools that can read this ECU. You need an official tool, no clone.

Official tools include: CMDFlash, Byteshooter, Optican, Kess, etc...

oep
11th June, 2010, 07:46 PM
Dunno maybe TC1796 found some info here http://www.alientech.to/pdf/web/KESSv2_Bootloader.pdf

aeroyas
11th June, 2010, 07:59 PM
hi all thank's a lot for your answers freind's, my ECI is BOSCH ref 03L 906 022 BR, i have galetto but cloned, i have also VAG DASH CAN but this tool dont have EDC 17 reading option, that can not be immo off by eeprom?? thank's a lot freinds

tachonow
11th June, 2010, 10:52 PM
hi all thank's a lot for your answers freind's, my ECI is BOSCH ref 03L 906 022 BR, i have galetto but cloned, i have also VAG DASH CAN but this tool dont have EDC 17 reading option, that can not be im*o off by eeprom?? thank's a lot freinds
I think that AVDI have this function on Vag Commander but cost a lot.

Goups
14th June, 2010, 02:25 PM
hi all thank's a lot for your answers freind's, my ECI is BOSCH ref 03L 906 022 BR, i have galetto but cloned, i have also VAG DASH CAN but this tool dont have EDC 17 reading option, that can not be im*o off by eeprom?? thank's a lot freinds

03L906022BR
0281014708
EDC17CP14-2.4
Engine code: CBAB

Depending of the build date of your car, it might be possible to read it through OBD2. If your build date is later than 01/2009, you need boot mode.


Currently, I am not aware of any solution of EDC17 immo off. However, it might be possible since EDC16 is easy.

aeroyas
16th June, 2010, 12:17 PM
hi all, thank's a lot for your answers, my EDC17 is on Audi A3, year 2009; i see that can be read by galetto, but i have only cloned one, is there any soft that can be used with galetto to read this ECU?? and readed, is there one of our community who can help on making it immo off??? thank's a lot

m_mikiki
20th June, 2010, 02:05 PM
EDC17 do you want pin?? bypass?? component security... i need eprom, and eep of dash board, do you understand?? this car is UDS or can. I have ADVI

aeroyas
21st June, 2010, 01:27 PM
hi thank's for your answer, but i dont need PIN i need immo off this ECU and there is no eeprom inside this ECU, do you have any solution??

exe123
21st June, 2010, 01:48 PM
Everything stored in TriCore MCU. You can read/write it with Byteshooter or CMD with Irom/Xrom tool.
No cheap solution and I doubt that there is any immo off for edc17 yet.

karlos.28
22nd June, 2010, 11:39 AM
Not jet. please more information?

aeroyas
22nd June, 2010, 09:45 PM
okay freind's thank's a lot anyway for your interest my prob is solved i have change all the start kit and car is go on now, but we need more infos about this EDC17, all peoples who have infos about this can participe. thank's a lot

marsete
10th October, 2011, 01:43 PM
hi friend,i add information for edc 17 boot mode.Regards:top:

marsete
18th November, 2011, 10:35 AM
Hi,more information for edc17;


EDC17CP09 BMW 30D
EDC17CP02 BMW 120D/123D
EDC17CP01 MERCEDES G320 / E350
EDC17CP10 MERCEDES Sprinter
MED17 MINI/PSA
EDC17CP11 LANDROVER/JAGUAR TDV6
EDC17CP14 VAG
EDC17CP20 VAG
EDC17CP24 VAG
EDC17U0x VAG
MED17.x VAG
EDC17CP22 VOLVO
EDC17CP14 KIA/HYUNDAI Sorento
EDC17C08 KIA/HYUNDAI Soul
EDC17CP15 MITSUBISCHI
EDC17CP06 HONDA
EDC17C19 OPEL Insignia
EDC17CP07 TOYOTA IQ
MED17 ROTAX
MED17 FIAT-ALFA-LANCIA

carmageddon
18th November, 2011, 11:46 AM
03L906022BR
0281014708
EDC17CP14-2.4
Engine code: CBAB

Depending of the build date of your car, it might be possible to read it through OBD2. If your build date is later than 01/2009, you need boot mode.


Currently, I am not aware of any solution of EDC17 immo off. However, it might be possible since EDC16 is easy.

boot mode for antituning ecu is only from May 2009 or if ecu is updated from VAG

moky
18th November, 2011, 01:22 PM
hi all,

someone know where i can buy cable tricore for galletto?

all clones are sell without it and nobody do it ? ....!

Thanks !

3abas27
14th January, 2012, 09:25 PM
Hi,more information for edc17;


EDC17CP09 BMW 30D
EDC17CP02 BMW 120D/123D
EDC17CP01 MERCEDES G320 / E350
EDC17CP10 MERCEDES Sprinter
MED17 MINI/PSA
EDC17CP11 LANDROVER/JAGUAR TDV6
EDC17CP14 VAG
EDC17CP20 VAG
EDC17CP24 VAG
EDC17U0x VAG
MED17.x VAG
EDC17CP22 VOLVO
EDC17CP14 KIA/HYUNDAI Sorento
EDC17C08 KIA/HYUNDAI Soul
EDC17CP15 MITSUBISCHI
EDC17CP06 HONDA
EDC17C19 OPEL Insignia
EDC17CP07 TOYOTA IQ
MED17 ROTAX
MED17 FIAT-ALFA-LANCIA

thnaks for this job can you clarify which produnt are you using and whats duffernce between this one and avdi abritus

GTTURBO2540
20th August, 2012, 09:38 PM
Hello i have i big problem with a seat leon 2.0tdi 170cv edc17cp14, i read the original ecu file with mpps v12 all fine, after i have try write the mod file and allways stoped on 74% because mpps dont cant write mod files in edc17 vag, i have put again the original and the car start fine,after i use cmd and read again the original ecu file, but in next steep i make stupidity because i use the mod file of the mpps and write with cmd and write with sucess, dont give any error, but the car dont start, now i have try put again the original file read by mpps and with cmd but the car never start, what i can do, ? if i put a used ecu how i make with the immo? immo information are on the flash or in eeprom inside tricore? many tanks

ecutuners
20th August, 2012, 09:56 PM
You need to read the full file in bootmode and rebuild it with the original obd read in winols then write back in bootmode. Forget a used ecu edc17 cant be cloned.

GTTURBO2540
20th August, 2012, 10:40 PM
Hello my friend, may i read with cmd boot mode ?the ori file i have read with mpps and cmd by obd is 2.048mb, and if i read the in boot mode its different size?many tanks

ecutuners
20th August, 2012, 10:43 PM
They are both 2mb but in bootmode you read the full file not just maps, its the only way to get the car started.

GTTURBO2540
20th August, 2012, 11:06 PM
Tanks for your fast reply, and are you sure if cmd in boot mode can write the full flash ?many tanks

ecutuners
20th August, 2012, 11:16 PM
Yes it can do it, also other tools like fgtech and x17 can do it.

houcem80
22nd February, 2014, 01:11 PM
hi to alllllllllllll

if there is soft for immooff edc17??

best regards