PDA

View Full Version : Eurovox Glasgow



DRYGUY
13th June, 2010, 02:36 PM
Hi I was rescanning my channels due to some channels being lost done a reset of box cleared channels then scanned using settings 6952 symbol rating and searched between 100 and 850 for channel frequency usually finds channels but ive found nothing at all anyone else from glasgow or cumbernauld area experiencing the same issue. my cable modem haxorware is still working so im certian its a setting im missing here for frequencies any help would be apreciated

chester8
13th June, 2010, 02:46 PM
Its N3 M8 where have you been?:giveup:

badapple
13th June, 2010, 02:49 PM
Hi m8, I think Glasgow received new nag3 cards a few week ago so all your channels will soon be gone(if they havent already)
There is no new firmware or cod*s, so you will not be able to receive any channels except the FTA ones.

DRYGUY
13th June, 2010, 03:56 PM
Wont beleive this I just ran a rescan and got all channels back movies sport etc so at least im working in NL area just now but as you say nagra 3 coming in so wont be long till they all disapear for good this time. Thanks anyway.

Take it nagra encryption just cant be broken then.?

What about haxorware modems are they going to crack down on those aswell soon?.

alan16
16th June, 2010, 09:39 AM
Hi drygguy

You said you got everything back Movies included with a rescan - What frequency settings did you use as i have lost nearly everything apart from sports - Are you in a pure NTL area

Cheers :bounce:

DRYGUY
16th June, 2010, 01:40 PM
start freq 100 mhz stop freq 850mhz

symbol rate 1 6952
symbol rate 2 6887
symbol rate 3 6875
symbol rate 3 6111

Modurator 64q0AM
Step 8 Mhz

or rescan trying

start freq 100 mhz stop freq 850mhz

symbol rate 1 6952
symbol rate 2 0
symbol rate 3 0
symbol rate 3 0

Modurator 64q0AM
Step 8 Mhz

scan, then scan, again then again, and again for a few hours if nesecary. I defo have all channels back also re-seat the fibre cable in the box and hard reset and factory default including clear all saved channels in settings before each new scan worked for me anyway.

no channels for ages I meen none found at all, then got them all persistence may pay off, might not be n3 as channels should show but will be encrypted may be another issue with the box etc

im on transponder 243/6952/64qam

shows with info button after sucessfull scan.

TELEWEST NORTH LANARKSHIRE CUMBERNAULD AREA SETTINGS

McMav
16th June, 2010, 02:27 PM
Thats a telewest area.

casuk
17th June, 2010, 11:07 AM
i have a eurovox maxv in glasgow area and iv lost most of my channels im new 2 this tryd a scan a few times and its just the same channels i get anything else i can do

mindcrime
17th June, 2010, 05:05 PM
i have a eurovox maxv in glasgow area and iv lost most of my channels im new 2 this tryd a scan a few times and its just the same channels i get anything else i can do

Not a lot mate . stump up for channels on vermin or sly .

kermitthefrog
17th June, 2010, 09:25 PM
i have a eurovox maxv in glasgow area and iv lost most of my channels im new 2 this tryd a scan a few times and its just the same channels i get anything else i can do
bin it before it drives u mad :giveup: