DIABLO 2.3

[wooper]

Hi.

Hope you can give me some good advice please.

I have a Technomate 7755 with conax patch and Digitalb card for footy that expired end of last season. Was thinking of maybe geting another card if footy comes back on to 3pm saturday.

Anyways. Have been lurking around the web and have seen mention of Diablo Cam 2.3. Now, am bit thick with such things, so would like your advice please.

Have seen Diablo Cam 2.3 loaded with underworld for around ?75.
Have seen Diablo Cam 2.3 loaded with underworld and cas 3 programmer for around ?130.

Would you advise to get loader as well? how long will this patch last if just paying the ?75? (ok, how longs a piece of string, but best guess.

Important bit. Does it work in the Techmate 7755? or is there a more suitable reciever? dont want to spend too much.

Do I have to enter keys every other day/week, or is it plug and play untill new update needed?

Is there an easier alternative to get 16" east??

Thanks in advance.

[benny/9]

Hi.

Hope you can give me some good advice please.

I have a Technomate 7755 with conax patch and Digitalb card for footy that expired end of last season. Was thinking of maybe geting another card if footy comes back on to 3pm saturday.

Anyways. Have been lurking around the web and have seen mention of Diablo Cam 2.3. Now, am bit thick with such things, so would like your advice please.

Have seen Diablo Cam 2.3 loaded with underworld for around ?75.
Have seen Diablo Cam 2.3 loaded with underworld and cas 3 programmer for around ?130.

Would you advise to get loader as well? how long will this patch last if just paying the ?75? (ok, how longs a piece of string, but best guess.

Important bit. Does it work in the Techmate 7755? or is there a more suitable reciever? dont want to spend too much.

Do I have to enter keys every other day/week, or is it plug and play untill new update needed?

Is there an easier alternative to get 16" east??

Thanks in advance.
************************************************** ***
hi m8,
i would go for the cam and cas3 programmer as
there is no point buying a cam without a programmer
files can last for weeks or days, you will need to re-load the
cam or add keys when the providers change the keys etc:
the diablo works good in the technomate receivers
and there is only a subscription card to open digialb and
the card is more costly than the cam and cas3 programmer
for the conax chns on thor 1w and eutelsat on 16e i have
never had to load any keys when they change a new file
is posted very quickly to get the channels back again
the cam also open other channels on other satellites and
is the best support cam and opens lost more than most
other cams and receivers at this time, to get the best
from the cam you realy need a motorised dish system,
the cam is very easy to load with a cas 3 programmer
and if you go for a diablo cam i will post how to program
the diablo for you.

[wooper]

Thanks for that.

couple of quick things.

I do have an expired Digitalb card, do I need to put the card in the cam or not?? not a big issue I know.

You say keys update automatically, at what point would I need to use the programer?

Thanks

[wooper]

or...

I have
never had to load any keys when they change a new file
is posted very quickly to get the channels back again

Where are these posted? Would I have to input them? does the Diablo do it through the satelite system?

Sorry for all the questions and thanks for your time.

[benny/9]

hi m8,
when i say i never add keys on the cam thats for digialb on 16e and the canal+nordic chns on 1w. when key files are posted they are usualy for the sexview chns on hotbird satellite and these dont interest me, as for a card in the cam you dont need one the file goes
into the cam chip and it then opens the channels for you,
the providers do make encryption changes from time to time thats when you load the new underworld file to open the channels again the files for the cam are posted on the forum. i posted the latest file here:---
http://www.digital-kaos.co.uk/forums/f11/q-box-full-version-diablo-11804/index3.html
and as i said the cam is easy to program and if you decide to get one i will post a doc that tells you how to load a file on the cam

[wooper]

Thanks for your time answering, this helps alot.

think i will invest in one with programer.

will only need it for digitalb as only really into the footy, and works out cheeper than a card anyway.

last question. when did digitalb last change encription? and are how often do they do this?

ta

[benny/9]

Thanks for your time answering, this helps alot.

think i will invest in one with programer.

will only need it for digitalb as only really into the footy, and works out cheeper than a card anyway.

last question. when did digitalb last change encription? and are how often do they do this?

ta
************************************************** *********
there is usualy a change every couple of weeks but we get a new dup file very fast usualy within 24 hrs and then when loaded on the cam the chns
are open again, do you think you would be better motorising your system
or moving the dish to thor 1w and then you will get far more channels
with sport,film,discovery.animal planet hbo chns, hallmark carton,adult'etc
and you will get double the channels that are open on 16e. i thought i had
read that the premiere football was leaving digialb

[.: JaCkPoT :.]

just... its not the encrypt that changes. just the keys i think

[oldie]

I have read that the Saturday 3pm ko,s start on dec 6th on Digitalb, tho dont take that as gospel. As Benny9 says 1w is by far the better package and I usually get the choice of 3 games on a sat afternoon on 1w conax.. Of course nothing is garunteed, like everything in life its a gamble.

Good luck

[.: JaCkPoT :.]

If you heard from darkman's place its probably not true. He just likes selling the cards easily. 1west with a cam will be so good for FOOTY.

[wooper]

thanks all.

what is the footy provider on thor 1"west??

[terry l]

Err..canal + 11278 v24500..

[.: JaCkPoT :.]

and digitv...novasport, prima tv-cz,eurosport2 hu/ro..etc

[wooper]

Thanks all. All good advice

Took the plungs and have bought Diablo cam loaded with underworld and progrmer.

My dish is fixed at 16"e, but am now thinking along the lines of geting motorised.

Called a local sat guy but he says he does not do this and the chap who put the dish up originally said he did not do motors.

Now if these guys dont bother it must be hard.

Could any of you impart some advice or know of anyone in the merseyside, specificaly ST Helens area, that could help.

ta

[benny/9]

Thanks all. All good advice

Took the plungs and have bought Diablo cam loaded with underworld and progrmer.

My dish is fixed at 16"e, but am now thinking along the lines of geting motorised.

Called a local sat guy but he says he does not do this and the chap who put the dish up originally said he did not do motors.

Now if these guys dont bother it must be hard.

Could any of you impart some advice or know of anyone in the merseyside, specificaly ST Helens area, that could help.

ta
************************************************** *******
hi m8,
for a installer fitting a diseqc motor is a simple job
but doing it yourself can be tricky, some do it no problems other struggle if you fancy a look at how to set a motor up this is a dish set-up guide with photographs
for diseqc usuals motors. this is very easy
to follow guide for the first time user
download and take a look, you are also in my erea i will
give you a pm

[wooper]

Thanks Benny.

will give them a call, maybe next week now.

Have a few things to do this weekend and want to get the cam and have a play with it, but will defo call them.

Might just give it a go, but maybe as well to let someone who knows what they are doing do it!!

Once its up and runnig should have great fun.

[benny/9]

Thanks Benny.

will give them a call, maybe next week now.

Have a few things to do this weekend and want to get the cam and have a play with it, but will defo call them.

Might just give it a go, but maybe as well to let someone who knows what they are doing do it!!

Once its up and runnig should have great fun.
************************************************** *
hi wooper.
now you've gone for the cam and cas3 here is a doc i made
for a new user on anouther forum on how to program the cam
download and keep it for the basic info on how to load the file

[wooper]

Thanks again.

Will come in handy.

Have just about managed to flash firmware in the past, so should be able to muck through!!

Do you have a motorised dish? how do you find it? is it wirth the exspence?

[benny/9]

Thanks again.

Will come in handy.

Have just about managed to flash firmware in the past, so should be able to muck through!!

Do you have a motorised dish? how do you find it? is it wirth the exspence?
************************************************** ******
hi m8,
i have a 1.2 chn master motorised dish and for me to get the best from your receivers and cams etc: it's a must, and you get a better choice of channels no matter what your intrests are, and as things go down
and while waiting for a new patch or file you still have plenty to view and for sport there are about 15 sport channels on thor 1w from canal+ and digi-tv plus the other chns film/documentry/discovery cartoon/adult etc:
and most are in english if like me you have a HD sat receiver there are lots of HD chns as well.

[wooper]

Thanks again.

Am going to treat myself to this for xmas (well, no one else will!!!!!)

my 1 m dish should be ok??? any I wouldnt get that you do? Thor 1 sounds interesting and defo want to keep 16e

[benny/9]

Thanks again.

Am going to treat myself to this for xmas (well, no one else will!!!!!)

my 1 m dish should be ok??? any I wouldnt get that you do? Thor 1 sounds interesting and defo want to keep 16e
************************************************** *******
hi wooper,
a 1mtr dish will get a good signal from most of the satellites
and is ok for the main satellites from 42e to 30w
i do get a couple of sats like nilesat 7w and astra3 23.5e
that a metre dish wont open. but these are not that good
from the uk and i loose signal in poor weather. you will get
the satellites that has the most open on them

[wooper]

Benny, you are the man.

thanks so much for your help.

[.: JaCkPoT :.]

Benny is really helpful, he is very clever. its ashame he only found us a few days ago. we could really have done with his help before :)
thnx benny

[wooper]

and he is only up the road from me, so may call on his help....soon!!!!

[wooper]

do i have to have a reciver Compatible with DiSEqC????

Just been looking around and have seen this mentioned a few times.

have a techmate 7755 at the moment.

ta

[benny/9]

do i have to have a reciver Compatible with DiSEqC????

Just been looking around and have seen this mentioned a few times.

have a techmate 7755 at the moment.

ta
************************************************** *******
yes your tm 7755 is compatable, with a diseqc motor
take a look in the receiver menu and you will find the info
in the motor settings

[wooper]

Right, have Diablo cam at home, am told loaded with underworld 1.46 and got my brand new Technomate 5400 CI+.

Now, plug sat lead in, scan 16e, as its pointed that way. Do I have to do anything else??

Saw this on another forum, do I do this or will reciever unlock automatically??:-


Once this is completed you can exit and insert the cam into your receiver.
You now need to alter the configuration settings.
Go into the Cam menu, using your receivers remote control.
Enter Stealth 248, and Enter the Configuration folder.
Alter the settings so:
Auto PMT ON
Emulators ON
N2 AU ON
Emulators Priority 1 Emu 2 Card
Fixed CW ON

[benny/9]

hi m8,
first you need to set the tm5400 up
in the menu for tv settings time satellites etc
then you can scan eutellsat 16e
next the cam needs the latest file loading ie:underworld 1.48
and the configuration could be set correctly this is how to set it
**********************************************
put the cam in the receiver slot and turn on
press menu and>go to common interface and you will
see the file name ie:underworld 1.36 highlight it
and click>ok on the next panel go to [4] configuration
and click>ok on the next panel set the configuration
to the following settings useing you vol and chn buttons
on your remote to scroll and change the menu's
************************************************
[1] language [english]
[2] caids file [caids]
[3] PMT - [on]
[4] emulators [on]
[5] N2 AU [on]
[6] Emu priority [1:emu-2:cards]
[7] fixed cw [on]
[8] Smartcard mess [show never]
[9] adminstrator menu [ do not change anything in this ]
************************************************** *******
after you have set the cam config to the above settings
exit the menu and turn the receiver off and on again to
lock the settings in the cam menu,now the chns will open.
************************************************** *
and you dont have to format the cam everytime you load
a new file the files overwrite one anouther
if you do format the cam you loose all your cam settings
and then you need to do the above again

[wooper]

Thank you so much Benny.

Thats my job tonight with a brew and a biscuit.

[.: JaCkPoT :.]

No beer.. You may wanna buy benny some for his help lol

[wooper]

Cheers Benny and Sadiq.

Ok, had a few beers watching Man u on Digitalb, then a few more, 5-3!!!!

Thanks for all the great advice.

[benny/9]

Cheers Benny and Sadiq.

Ok, had a few beers watching Man u on Digitalb, then a few more, 5-3!!!!

Thanks for all the great advice.
************************************************** *******
hi wooper,
i take it your up and running with your new box and diablo cam?
from what said about watching digialb, was i right about how easy it is to load a file on the cam just wait untill you get a motor then you will realy get the
full benifit from them.

[bigtoddy]

1west and cam is great for footy

[wooper]

Cheers Benny.

The cam came with 148, so was ready to go. Fun will come when that changes, but have flashed boxes before, so should not be too hard.

Reciver wanted to automatically search 28.2!!!! deleted that and all the free chanells came up for 16"e.

took me a while to figure to scan 16" before I could get the footy.

Still, was up and going in about 15 mins if that.

Can I not get xx and xxx ( I think) as they are HD?? get 1x and another??

Thanks again Benny.

[benny/9]

Cheers Benny.

The cam came with 148, so was ready to go. Fun will come when that changes, but have flashed boxes before, so should not be too hard.

Reciver wanted to automatically search 28.2!!!! deleted that and all the free chanells came up for 16"e.

took me a while to figure to scan 16" before I could get the footy.

Still, was up and going in about 15 mins if that.

Can I not get xx and xxx ( I think) as they are HD?? get 1x and another??

Thanks again Benny.
************************************************** *******
hi m8,
they are not HD chns you should get them open, go to the chn and turn off
and on again to see if this clears the problem, also if you change channels fast the cam then stops opening the channels, the cam has a lot in the file and is a little slow opening the chns.also if when you set the box up after setting language,tv settings,time etc, you go menu>satellite set up anf click >ok a small panel opens with a satellite list you scroll to the satellites you want on the list and press yellow to save, then you scan the satellite for the chns,

[wooper]

Hmmmm, I thought it a little odd as some of the conax channels would not open, ie xx wouldnt but x would.

Am not really bothered though, all the footy ones do and the film ones and are in the favourites now, so all is well in the world.

Have Kryptview on the cable so get all Sly and Vermin anyway.

Ironic to think I dont watch much TV, just the footy really.

Must get that motor and onto thor, Nova sports looks good.

[benny/9]

for anyone with the diablo cam and you have lost some
of your channels the conax channels are down on 8w
and 9e satellites all others are still open. it looks like a
new data bin is needed

[wooper]

Thanks Benny.

Does not mean too much to me, being stuck on 16e. Do I have to do anything?

[Pittsey]

Thanks Benny.

Does not mean too much to me, being stuck on 16e. Do I have to do anything?



If you're not viewing those Conax channels. Then no worries. When you get a motor and try to view them you will have to use the latest bin data files to open these channels.

[wooper]

Gets more complex!!!

Can just about scan the sat and put the cam in!!!

Was quoted ?690 ish today for motorised sat and instalation today!!!

Sounds a lot

[benny/9]

Gets more complex!!!

Can just about scan the sat and put the cam in!!!

Was quoted ?690 ish today for motorised sat and instalation today!!!

Sounds a lot
************************************************** *******
hi m8,
your ok mate just keepp viewing, now this dish set up
i agree that is a lot, is that for a compleat new dish set up?
was it from the info i gave you if it was i will send you anouther
place to ask

[wooper]

Hi Benny.

No, I mailed the place you sent me, but got no reply, though that said, I should try calling them, and no doubt will.

Place I called :-

TV Aerial Installation; Digital, Satellite & Analogue by AerialForce (http://aerialforce.co.uk/about-us/)

That was for dish and everything, but they said they do a survey to see if there is anything they can use.

Already having a dish, seems a little bit of a waste.

Is that a lot in your experience???

[benny/9]

Hi Benny.

No, I mailed the place you sent me, but got no reply, though that said, I should try calling them, and no doubt will.

Place I called :-

TV Aerial Installation; Digital, Satellite & Analogue by AerialForce (http://aerialforce.co.uk/about-us/)

That was for dish and everything, but they said they do a survey to see if there is anything they can use.

Already having a dish, seems a little bit of a waste.

Is that a lot in your experience???

************************************************** ***
hi wooper,
i would think you could use your own dish lnb etc
you might need a new mount/pole and new cable
i have sent anouther pm i hope he is still there mate
but keep ringing the first one a lot of them dont answer e-mails
also there was a guy in your town near pilks but
i cant remember the name on his shop

[wooper]

Cheers benny.

Noticed in the Local star lots of numbers plus a load in phone book.

May have a trudge around pilks this weekend, see if I spot him.

Didnt realise there was a sat place in St Helens.

[benny/9]

Cheers benny.

Noticed in the Local star lots of numbers plus a load in phone book.

May have a trudge around pilks this weekend, see if I spot him.

Didnt realise there was a sat place in St Helens.
************************************************
hi wooper.
if i remember correctly it was hawley satellite and it was on the
right hand side when heading for pilks from safeway shop
i dont know if he's still there

[wooper]

Hmmm, dont think its there now. Been a Tesco now for years.

May have a wonder around on Sat for something to do!!

Going back to an earlier problem. I can get the films and sport but some conax channels wont open. a couple of the x ones dont but 2 do! I think Hustler, though not sure if was imagining seeing that (no pattern here, honest!!!!!), and a few others.

Like I said, not too bothered, I just like to boast, to myself mainly, that I can view things that others dont.

Have tried leaving channel open, turn on and off on channel, but nothing, and only scanned sat last week, so its not that. Any other ideas??

[benny/9]

Hmmm, dont think its there now. Been a Tesco now for years.

May have a wonder around on Sat for something to do!!

Going back to an earlier problem. I can get the films and sport but some conax channels wont open. a couple of the x ones dont but 2 do! I think Hustler, though not sure if was imagining seeing that (no pattern here, honest!!!!!), and a few others.

Like I said, not too bothered, I just like to boast, to myself mainly, that I can view things that others dont.

Have tried leaving channel open, turn on and off on channel, but nothing, and only scanned sat last week, so its not that. Any other ideas??
************************************************** ****
hi m8,
yes it's awhile since i was about there mate it could be gone, now
you should get the xxx chns to open they are on the same transponder
as digi film chns, just take a look on kingofsat, to check if you have the
correct frequencies, put the tt in the link
h**p://en.kingofsat.net/sat-w2.php

[wooper]

Cheers benny, will have a look later on.

[benny/9]

underworld data bin 10/12/08
***********************
Fixed:
digialb on eutelsat 16e
SexView
KabelKiosk Atlantic Bird 2/Telecom 2D [8W]
the conax chns on eurobird [9e]
************************************************** ********
this is a data key file and if your new to the cam
and need to know how to load it:-- this way
**********************************
first open and take the file from the folder on your desktop
open the cas studio software and click cam module button
click diablo cam and go to the diablo cam loader panel
next click the cam filesystem box at the top of the panel.
on the next panel that opens click the connect box
and wait untill the panel lights up and you see two green arrows
at the right of the local files box bottom left of the panel
in this bottom panel you will see the data file left click it and it will
highlight the left click the right facing green arrow to the right of the
local files box and the file will transfer onto the cam and you will see
a small panel saying:-----
[the file already exists do you want to over write it] say yes
then you will see a blue bar strip at the bottom of the panel
showing the file transfering to the cam when loaded exit the
cas software loader and put the cam back in the receiver
you now have your channels open again

[.: JaCkPoT :.]

Sorry if this has been answered but are you definately sure that you have a 2.3? The 2.2's dont open conax on 1west.

[benny/9]

Version: UnderWorld KEYUPDATE
ReLeasE Date: 13/12/08
*****************
Working on:---
? Q-Box one
? Diablo CAM 2.2 and 2.3
ALWAYS USE LATEST FIRMWARE AROUND!!
Fixed:
KabelKiosk Atlantic Bird 2/Telecom 2D 8w and 9e

[benny/9]

New Underworld 1.50 18/12/08
***********************
digialb fixed on eutelsat 16e
plus all chns on 1w-8w-9e>ok

[wooper]

Nice one benny.

[benny/9]

data bin fix inxworld and free-x-tv 24/12/08
*********************************
New DATA.BIN for Diablo and Qbox key update file
Working on: Q-Box one Diablo cams v2.3 and v2.2
USE ALWAYS LATEST FIRMWARE AROUND!!
Fixed InXWorld [AU now works on al INXWorld channels again eg Free-X TV]

[benny/9]

to-days diablo cam keys update 27/12/08
*******************************
Digi TV (2111) 01 Keys
Dream TV 00-01 Keys (146?E)
Max TV DCW Keys (16?E)
ALL OTHER KNOWN KEYS UPDATED
TEST CHANNEL 2 Biss Keys (26?E)--->11862 v 27500
sex view ...freex tv1-2 xdream french lover au ..at the moment .
*****************************************
load this the same as a data bin file via the cam filesystems
on the cas loader
*****************************************
this is the second keys change to-day
new key file added

[benny/9]

diablo keys bin 31/12/08
********************
Updated new 01 key for digi-tv select N2AU [off]
dcw for xdream on 10E and 13E(13 E freq 10854 H 27500 3/4) Turn fix cw [on] at the moment ok...on freq 12208 H 27500 3/4 working au
replaced name for biss Discovery-Travel&Li ( the name is changed to fox sports)
replaced name for biss Discovery-Middle-Ea ( the name is changed to discovery science)
EuroBird 2 (25.5?E) 11585-87 V 27500 3/4
sex view ...freex tv1-2 xdream french lover au ..at the moment ...turn fix cw [off]
Pol**t is working only some channels

[benny/9]

New Underworld 152 / 05/01/09
************************
What's New :
Fixed FreeX
Diablo WIFI beta-version gbox camserver

[wooper]

Can 151 still open digitalb??

[benny/9]

Can 151 still open digitalb??
**********************************************
yes mate this is mainly a fix for freex
thor 1w and eutelsat 16e are still open
with 1.51 file so if you dont want the xxx chns
stay with what you have

[wooper]

Thanks again Benny.

[wooper]

153 is out.

is this needed for digitalb?

[tonyreal]

hi all i have a technomate 6800 hd receiver with diablo 2.3 cam can anyone confirm this will open hd channels on 16e, ie digitalb as have been told need a card for the cam to open these,this info came from another site that sells subscription cards for digitalb so they might be biased thanks .

[eddik]

underworld153 with new bin file opening canal+ and digitv on 1w all open

[.: JaCkPoT :.]

hi all i have a technomate 6800 hd receiver with diablo 2.3 cam can anyone confirm this will open hd channels on 16e, ie digitalb as have been told need a card for the cam to open these,this info came from another site that sells subscription cards for digitalb so they might be biased thanks .

only digitalb hd receivers open the hd channels with a sub... the hd cards are paired to receivers so that you can only watch it on the box you subbed it to...however you can still watch tyhe digitalb sd channels with this cam

[mikeyb]

wooper if your looking for a place that does installations try SATandCABLE - Satellite and Cable products based in Merseyside - SATandCABLE (http://www.satandcable.com) and then click on installations.They are based in Liverpool and It says on the site that it is ?130 for motorised dish set up.

[dennisfoad]

Hi, I have diablo 2.3 and cas3 plus .I need help to find where to find the keys to program the cam as I cant seem to find any site that will let me download.If its to much of a problem then anyone want to buy the items as above as I give up ? thanks for any help.

[2tone]

Hi, I have diablo 2.3 and cas3 plus .I need help to find where to find the keys to program the cam as I cant seem to find any site that will let me download.If its to much of a problem then anyone want to buy the items as above as I give up ? thanks for any help.

have you put the firmware on the cam yet

[KennyOH]

u need to download dupe files to program diablo at present it is 191 kennyoh

[GIARDINIERA]

Hi, i am new at this forum ,this is my problem:
I have a Diablo cam ver. 2.3 with underworld 1.89 soft but it don?t
read a original Tivusat card , do i need a newer kind of
software ,for reading this card ? Please a little help.
Thanks