psa interface

[ctn1]

hello all in this lovely dk forum , i have a actia psa interface 983838b/36w08/902595 i use for pp2000 it works fine , but kan i use it for others programs , multidiag or ?
regards ctn1

[Bento16]

work only on PP200 or Lexia software.

[ctn1]

thanks , lexia software ? is it multidiag ?

[molla79]

Lexia it's like pp2000 but for citroen...

[scarymistake]

thanks , lexia software ? is it multidiag ?
here is lexa
http://www.digital-kaos.co.uk/forums/f123/lexia-update-without-internet-104677/#post516913

[bbcas]

good day friend
i've bought this interface from France
i have tried PP2000 (22-12, 21-14, ....) but impossible to launch the application. so where the poblem is:
interface or PC portable or PP2000 ????
thanks and sory for my english (I'm from Algeria)

[scarymistake]

good day friend
i've bought this interface from France
i have tried PP2000 (22-12, 21-14, ....) but impossible to launch the application. so where the poblem is:
interface or PC portable or PP2000 ????
thanks and sory for my english (I'm from Algeria)
read this first
RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/374585915/Lexia_and__pp2000_install._Update_and_activate_exp lanation.docx.html)

[alexispara]

work the interface of lexia 3 in multidiag software

[Patrian]

work the interface of lexia 3 in multidiag software

If you mean PSA Evolution XS KIT or Lexia Interface, IF they can to work with MultiDi@g Office S/W = NO AT ALL!!!!! :willy:

The opposite = YES!!! Actia MultiDi@g PassThru Device CAN works with Lexia & PPO S/W's (via special Firmware flashing)..... :thrasher:

Regards!

[dielektrik]

Hi all,

New SW for PSA is DIAGBOX. This time it used w/ XS-Evolition

Probably in the future it will be used w/ Passthru +XS 2G

Attached files for ptXS2g +lx3 and ppo

[lanmaki4]

If you mean PSA Evolution XS KIT or Lexia Interface, IF they can to work with MultiDi@g Office S/W = NO AT ALL!!!!! :willy:

The opposite = YES!!! Actia MultiDi@g PassThru Device CAN works with Lexia & PPO S/W's (via special Firmware flashing)..... :thrasher:

Regards!


Can you share that firmware?

[scarymistake]

Hi all,

New SW for PSA is DIAGBOX. This time it used w/ XS-Evolition

Probably in the future it will be used w/ Passthru +XS 2G

Attached files for ptXS2g +lx3 and ppo
what can you do with
AddOne1003051.rar (http://www.digital-kaos.co.uk/forums/attachments/f155/29010d1282654804-psa-interface-addone1003051.rar) :questionmark:

AddOne1003052.rar:questionmark: (http://www.digital-kaos.co.uk/forums/attachments/f155/29011d1282654804-psa-interface-addone1003052.rar)

[dielektrik]

xxx1 adaptation lx3 for PT2G
xxx2 adaptation ppo for PT2G

PC should have MultiDiag lx3 and ppo on C disk

[kikklos]

Hi, I have problems with the tool multidiag I can not change the firmware to use with the software of lexia3, if you can help me, I thank you in advance:boring:

[Larue]

Hi, I have problems with the tool multidiag I can not change the firmware to use with the software of lexia3, if you can help me, I thank you in advance:boring:
Mate, can You tell us step by step what exactly You are trying to do and what isn't working? Some printscreens would be nice as well!

[kikklos]

hello friend, I have multidi@g actia, and it works perfectly.
I want to make the program work interfacce lexia3.
When I connect to the car by lexia3 interfece not recognized and I've read in some forum you have to load a special firmware, but do not know what is or how.
If I could say which is the firmware and as it loads.
THANKS

[paro44]

Actia multidiag is software, that cannot run with lexia interface.

If you have actia passthru interface, then you can change firmware that it can work with lexia software, see post #9 from patrian.

[kikklos]

If you mean PSA Evolution XS KIT or Lexia Interface, IF they can to work with MultiDi@g Office S/W = NO AT ALL!!!!! :willy:

The opposite = YES!!! Actia MultiDi@g PassThru Device CAN works with Lexia & PPO S/W's (via special Firmware flashing)..... :thrasher:Regards! __________________via special Firmware flashing???? as by the firmware, and then you can remove the firmware and Como is loaded automatically.
thanks:boring:

[paro44]

So you found Patrian's answer.
Afaik the firmware can be flashed with a small program.
Look here: (http://www.digital-kaos.co.uk/forums/f155/guide-use-actia-passthru-xs-lexia-pps-157905/)

There is another thread about the passthru interface worth reading (http://www.digital-kaos.co.uk/forums/f152/multidiag-actia-passthru-xs-51936/)