How to Manually update keys on Starview

[Devilfish]

Thanks to BigMaq for posting this. :)


STARVIEW STBs

~~~~ knows where i got this from ...http://www.de-crypt.net/forum/images/smilies/tinysmile_fatgrin_t2.png Just found it on my HDD ..thanks to original poster:


To put keys in manualy do as follows.
Press menu button


Press 1570 this takes you into secret menu.
Now hit ok on nagravision

Next make sure your cable provider is listed at top NTL or TELEWEST C&W ect

Now change key 00
(YOU MUST SAVE EACH KEY INDIVIDUALLY - I.E. AFTER CHANGING KEY 00 MAKE SURE
YOU STORE BEFORE CHANGING KEY 01 (TO STORE PRESS OK)


Right now change key 01 (To change between the 2 keys highlight key number press right and left )

Please Dont forget to store key again press ok

[jordanjoel]

thanks Devilfish, I have done this on my starview 3, what does this process of manually putting in the keys actually do? still canna get me channels back?

[Devilfish]

Just now, the keys aren't auto updating so the latest keys need to be manually entered for you to get the channels back. If you're channels are still not working, the keys are not correct. If you got them from the keymaster application, you'll need to wait until it's updated.

[satsmo]

Have you made sure you entered both lines correctly?

[jordanjoel]

yes mate i think so, did 00 then 01 saved em each time, then exit exit again! data being updated 10% 20% etc then channel name comes up but no piccy, i take it is down to the big vm scramble?

[satsmo]

Make sure you are using the correct provider. As Devilfish said the keys may need to be updated.

[fizler316]

mine doesnt say a service provider at top it just says next to provider id:54 01

[Devilfish]

54 01 is for ex-ntl areas.
5A 01 is for ex-tw areas.
5C 01 is for ex-cw areas.
5E 01 is for chorus areas.

[thewizardofodds]

cheers mate starview 4 is up and running again.

[jordanjoel]

am using n*l, again being a non teccy i would not know what you mean by keys need to be updated? iam very sorry, would ya be able to give me a lamens explanation please?

[scjgreen]

which keys do you use from keymaster?

CW, TW or PURE?

[satsmo]

Depends on what ex area you are in.

[meetmax]

Depends on what ex area you are in.

Hi,I have starview 1 and since today morning I am not geting any channels. I did try the codes e.g. ex tw or ex c&w but doesn't work at all... Do you think I should wait for new firmware as I am already on V4.00. Any advice welcome.

[scjgreen]

ex-ntl i think, well i select NTL when i tune my box?

[bigmark1966]

CAN ANY ONE TELL ME IFF THE CHANNELS ARE BACK ON STARVIEW 4 I LIVE IN NOTTINGHAMSHIRE AREA THNX......:banghead:

[bongo1978]

hi all total newbie here would love some help how can i get kys as channels wont update well counts up to 100 somtimes more but still nothing

[spankey]

Hello All,
Complete newbie here - I have a starview 3 with the same errors reported here - can anyone direct me to a step-by-step muppets guide to fixing it please?

Cheers
Simon

[kronos]

Hi guys just wanted to say thanks for all the help with this. and great work by all.

[satsmo]

Please read the first post on page 1 regarding manual update.

For those people that are looking for provider/area info, please download the list here (http://rs390.rapidshare.com/files/153292440/Areas_Codes_Symbol_Rate..docSymbol/)

[mickarick]

Ok im in a TW area everytime i enter the keys the box dont update then when i go back to nargra the page shows as Ntl anyone please .

[satsmo]

What model do you have Mick?

[mickarick]

Its the box m8 thanks using 450 E

[vishal88]

ok i have starview 3 super but am a bit confued. i selected tw from the list what do i do now? do i select 01 and then press ok?

[speedynn3]

:dancing::celticscarf::coffin:
thanks devilfish ur da man...got it working now...the missus has got her jerry springer back lol

[jordanjoel]

having trouble opening up keymaster in rar format for starview, any suggetstions please?

[vishal88]

can someone plz help i selected tw from the list now what do i do? do i need to download something?

[satsmo]

can someone plz help i selected tw from the list now what do i do? do i need to download something?


You need to read page 1.

[satsmo]

Its the box m8 thanks using 450 E

Mick, press menu - type 1570 on remote - press default key - then select provider - now input both key lines.

[vrlika]

I just altered the last to digits in line 01 in pure area and saved and all back now so simple .

[tony_i]

I seem to be missing something.

I go to the nagra part of my SV4, change the code to suit my provider (CW).
Change code 0, press OK to save. It says it's saving it.

Do the same for code 1.

Exit.

Channels say they're updating but aren't.

I go back to nagra and my new codes have all disappeared.

Help!

Tony

[tony_i]

I seem to be missing something.

I go to the nagra part of my SV4, change the code to suit my provider (CW).
Change code 0, press OK to save. It says it's saving it.

Do the same for code 1.

Exit.

Channels say they're updating but aren't.

I go back to nagra and my new codes have all disappeared.

Help!

Tony

Someone just posted this on another thread:

"Just been reading on another forum that the C+W keys on keymaster are incorrect and so we have to wait for new ones. This would explain my difficulties> Can anyone else add anymore to this?"

Could this be my prob? Still doesn't explain why my settings aren't being stored.

Thanks

[mickarick]

Mick, press menu - type 1570 on remote - press default key - then select provider - now input both key lines.
Didnt work sorry m8 tried both lines same as before when box fails to update i go back to nargra and its still goes back to nthell

[tony_i]

Didnt work sorry m8 tried both lines same as before when box fails to update i go back to nargra and its still goes back to nthell

This seems similar to the problem I'm having.

[nsw9154]

my box pvr went off today as well but is dose not use the 1570 code it uses a diferent set up will this fix work with the box pvr

[satsmo]

Didnt work sorry m8 tried both lines same as before when box fails to update i go back to nargra and its still goes back to nthell

Mick select default key again, then turn SV off at back switch then back on. Now see if you can enter codes on the correct provider.

[satsmo]

my box pvr went off today as well but is dose not use the 1570 code it uses a diferent set up will this fix work with the box pvr

Similar except:

Go to parental control in receiver menu

press ( i or info button) + (2007)

key screen will be visible

[scozzer]

hopefully this will work

[The Cobra]

Av also got The Box and yep you can get into the secret menu thru the parental controls bit as described above, gona try and sort this out in a mo I hope we can all get this back working soon enough!

[mickarick]

Does anyone know how to switch the auto update off on the box please

[jordanjoel]

sorry guys to be a pain, have tried all afternoon to open keymaster have even downloaded winrar, is there any other way to get keymaster codes for my starview 3 please?

[satsmo]

Does anyone know how to switch the auto update off on the box please

Turn key emu off in CAS menu, where the default key is.

[mickarick]

Turn key emu off in CAS menu, where the default key is.
Ahhh but then i wouldnt get ppv channels would i lol ohh well just a thought , thanks m8 .

[tony_i]

Does anyone know how to switch the auto update off on the box please


Cancelled post.

[nsw9154]

:embarassed: i am getting realy confused and not sure what to enter i got into the nagravision page
provider id 54 01 00 NTL
key number 00

so i changed the key number to 02 it did not work and always seems to reset back to default so i tried 54 01 02 still the same 54 02 02 still will not work what am i doing wrong thanks in advance

[satsmo]

If you are on NTL you dont change the provider ID, you change the 00 and 01 key lines.

[cgscott]

:embarassed: i am getting realy confused and not sure what to enter i got into the nagravision page
provider id 54 01 00 NTL
key number 00

so i changed the key number to 02 it did not work and always seems to reset back to default so i tried 54 01 02 still the same 54 02 02 still will not work what am i doing wrong thanks in advance

It should be 5401 00 keycode
5401 01 keycode

[buzzbomb]

Have just updated my Starview the Box and noticed that I only had to change a couple of the codes in each key code line. Suspect that all the auto updates I let the box do had input most of the codes but somehow mixed one or two to prevent our boxes clearing the channels. Anyway working again although I hope someone comes up quickly with an auto update fix.

[The Cobra]

It should be 5401 00 keycode
5401 01 keycode


I have a 'The Box PVR' which I believe is like a Starview 2. Ive gone thru the parental controls way and my area is coming up as NTL, so have tried the Pure keys off Keymaster and they dont work, so I tried the other keys (TW and C+W) just for a try and they didnt work either. Am in Manchester so not working here to my knowledge unless Ive done something wrong.

I also turned off the auto update option. Nothing working any way I try.

[girthius]

I'm in manchestre too think it's C&W will let you know if i get it working

[nsw9154]

It should be 5401 00 keycode
5401 01 keycode

i tried doing that and still the same thanks any way i think i will go to the pub and chill out :cheers: lol

[hollyprice]

hi could some one pm me the new codes so i can imput them maually thanks

[The Cobra]

i tried doing that and still the same thanks any way i think i will go to the pub and chill out :cheers: lol

Yep at the end of the day it's only telly, at least they dint do it before the Hatton fight at weekend or I'd have cried big style.

Hopefully I will get mine working in the next few days, anyone in manchester area feel free to IM me if you get it working!

[tony_i]

CW codes have been updated and I'm sorted.

Anyone else having trouble with CW should give them a whirl.

[AirShowNut]

Worked a treat on my neices starview box.Thanks man,this forum is the dogs doo doo's lol.

[Richieburner]

Anyone else having trouble with the bigmaq toolbar download?

[shoughton]

thanks for the info!

[oscarjohnboy]

Anyone else having trouble with the bigmaq toolbar download?

where do i get the codes from?

[dg45]

can someone please please please pm me the codes!

[knocker]

and me please im on ntl
thanks

[spurs2000]

CAN ANYONE OUT THERE TELL ME HOW TO PUT A POST ON HERE,CANT ACCESS ANYWHERE UNLESS I DO A POST!!!!
HELP!!!!!

[nick1]

Me to please. Ntl please. Thanks

[oscarjohnboy]

please help me im on tw central scotland and need step by step info thanks to any1 that helps

[oscarjohnboy]

where can i get codes for starview the box super.....can any1 help been at it all day....im in central scotland on tw.....thanks

[ffc123]

Looks like the same as back in April. I am in Dublin and still clear here but a matter of time I think. Looks like a fix will be out in a week or so if the last major code change is anything to go by. Anyway finger crossed.

[mickarick]

At last got the keys in dont ask how lol didnt do owt diffrent .

[ffc123]

where can i get codes for starview the box super.....can any1 help been at it all day....im in central scotland on tw.....thanks


Awright mate go back to the start of the thread and read through it. It looks like its workin for most people.
Google bigmaq and get the toolbar.

[lamby]

Hi just got my starview 4 USB box working on TW.
1. 1570
2. reset code
3. 5A 01 is for ex-tw areas. ** USED THIS **
4. Ran Keymaster
5. please note there are two codes ( thats what got me !!!! )
For CODE 00 go down to KEY 0 code line and enter the data from Keymaster KEY 0=
press OK to save
6. Move backup to key line and change to CODE 01
For CODE 01 go down to KEY 1 code line and enter the data from Keymaster KEY 1=
press OK to save
7. press escape twice

and then the channels should be back.

I hope this helps !!!.

[oscarjohnboy]

Awright mate go back to the start of the thread and read through it. It looks like its workin for most people.
Google bigmaq and get the toolbar.

could u give me step by step info on that as im usless thanks

[oscarjohnboy]

could u give me step by step info on that as im usless thanks

...............................

[zran]

Hi, tried and test this method - works great for C&W.

[oscarjohnboy]

could u give me step by step info on that as im usless thanks

sorry lads

[zran]

OscarJohn you might want to remove those keys ASAP, against the rules AFAIK

[oscarjohnboy]

sorry lads

[silverscoob]

I know you guys must be fed up with this but could do with some help.
Got a Box PVR, can get to the 2007 menu and key section but how do you enter the keys A, B, C, D, E from the remote???
Normally, pretty good with these things but head-brick wall comes to mind .
cheers

[mickarick]

When you go to nagra use the numbers keys on remote and your coloured keys look at the bottom of the page on nargra it will tell you that green is D etc .

[silverscoob]

Hi,
Thanks for the reply but don't get those options and tried the coloured keys but no values A B C D E?

Do I need to edit a file on the The Box PVR?

[k8rew]

it should say at the bottom of the screen, it does on my starview...audio=A 'etc'

Mines upand running again...:congrats:

[silverscoob]

Mine is the Box PVR and seems a little different. Nothing at the bottom of the screen, can enter 0-9 but no A-E!! Any help as driving me up the wall.

[k8rew]

when you go in through 1570 and you enter Nagravision it should give you the options i.e.
Pause=A Audio =B Red is C 'etc'
have you tried these buttons?

[slapshot]

Hi just got my starview 4 USB box working on TW.
1. 1570
2. reset code
3. 5A 01 is for ex-tw areas. ** USED THIS **
4. Ran Keymaster
5. please note there are two codes ( thats what got me !!!! )
For CODE 00 go down to KEY 0 code line and enter the data from Keymaster KEY 0=
press OK to save
6. Move backup to key line and change to CODE 01
For CODE 01 go down to KEY 1 code line and enter the data from Keymaster KEY 1=
press OK to save
7. press escape twice

and then the channels should be back.

I hope this helps !!!.

Thanks! Works a treat.

Needed to rescan and turn Keycode to On also.

[derekbinsley]

which keys work for ex C&W?

[silverscoob]

To get to that menu on mine I
System
Parental control
i + 2007

The PVR seems to have a different menu than the others and I can't get my head around the manual key entry.

Probably been a bit spoilt as so far it's always Auto-updated, never had to enter keys manually before...

but thanks for the help anyway..

[sienna99]

could someone pm me please? i dont understand this key business at all! im total novice at this. my starview been down all day. and emu is on. at a loss as to what to do ???

[bunter492]

Thanks will give it a go

[roborob2000]

I am new to all this forum stuff, but i know how to input the key codes, but i dont know where to get them from.
which is the best programs for key codes and where can i get them from.
thanks

[satsmo]

I am new to all this forum stuff, but i know how to input the key codes, but i dont know where to get them from.
which is the best programs for key codes and where can i get them from.
thanks

Please read page 1 of this very thread and welcome to the forum.

[roborob2000]

We have all got to start somewhere
thanks

[bigbob2009]

mine works. many thanks

[roborob2000]

Sorted
This is the best forum i have joined.
Even if it is my first.
Many many thanks

[stuteeblue]

Sorted on TW in Shrops...you guys are fab!!!

[silverscoob]

Anyone else manually updated their "The Box" PVR, as still need help on how to enter the A B C D E in the key code section???

I've got the keys but...:giveup:

Do the i + 2007 to get there but can't enter the HEX letters??

If someone has done this on their Box PVR could they let me know pm me or reply in this thread.

ta
:giveup:

[bunter492]

Im in a VM area which used to be N*TL but when i scan for channels the box needs to be set to TW (Telewest?) or it finds nothing. So I tried the TW keys but no luck:hmpf:

[satsmo]

Try other providers.

[reaper82uk]

hi i am new to all this but what i have read has been great i hope i can fix my box with the info i found out once again thanx

[mrgross9]

my box has also gone down if anyone can help please pm me thank you

[toto67]

my box has also gone down if anyone can help please pm me thank you
PM'd,just like that........

[dajw]

Have been reading the internet all night trying to get my starview 3 box working.
I gather i need the keycodes for TW in the Midlands. Can anyone help?
Thanks in advance.

[nsw9154]

i tried doing that and still the same thanks any way i think i will go to the pub and chill out :cheers: lol

been the pub came back and still drunk hehehehe any advance on the problem :beer::pepsi: hehehe lol
going to bed now my head is in the shead good night peeps zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz

[martin-f]

been the pub came back and still drunk hehehehe any advance on the problem
yes m8 you may need help try the AA :hmmmm2: lol

[nsw9154]

Hi just got my starview 4 USB box working on TW.
1. 1570
2. reset code
3. 5A 01 is for ex-tw areas. ** USED THIS **
4. Ran Keymaster
5. please note there are two codes ( thats what got me !!!! )
For CODE 00 go down to KEY 0 code line and enter the data from Keymaster KEY 0=
press OK to save
6. Move backup to key line and change to CODE 01
For CODE 01 go down to KEY 1 code line and enter the data from Keymaster KEY 1=
press OK to save
7. press escape twice

and then the channels should be back.

I hope this helps !!!.

:devil::pepsi:THANK YOU lamby i could not sleep till i got it sorted i did what you said and wam it works i was only entering 1 of the lines at a time then trying the other line entered key line 0 saved then entered key line 1 and saved and every chanel came back nice one - now i only have to put them back in the order that i like them because i did a factory reset lol :bounce::dito: thanks again mate now i will sleep well zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz lol ps i used the pure keys for ntl

[bunter492]

Try other providers.

Thanks - but dya mean in the key section? put in the cw, tw pure etc? surely not ireland ntl? I am on south coast - but will try

[graham]

I notice that the keys have changed again today. I input the new ones and still got "bad or scrambled channels" message. Turned key emu on and all channels back working. I thought I read somewhere that emu should be off for manual keys, could someone please clarify this for me.

[bigbob2009]

guys...mine worked after putting a code in last night, then i woke up this morning and its doing the same. updating channels.

if anyone has got their box working can you please pm me?

many thanks.

[bigbob2009]

any more info on this emu aswell, i dont really understand all this emu stuff.

[supersean27]

i am in the same boat just keeps trying to update.

[iman]

I updated my box with codes found in another forum it worked for about 1/2 hour then data is being updated popped up again..not cool i need my star trek fix after my night shift

[graham]

To all looking for keys. The keymaster was updated for pure this morning, link should be in your toolbar (cha**erbox). Sorry for being cryptic but not sure what I am allowed to post on forum.

[DigiClone42]

Hi Guys, Running a SV 4 USB in Berkshire area on an ex NTL line. Updated keys manually but still no PayTV. The box seems to auto-update the keys. Is there a way to switch this off? Only just updated to 1.05 firmware. looking forward to finally use the PVR function!

[lsn202]

Hi Guys,
Just used the keymaster "Pure" codes on my Starview 2 and it's up and running again. West of Scotland area, n*l/V*.
Thanks to all.

[The Cobra]

I know you guys must be fed up with this but could do with some help.
Got a Box PVR, can get to the 2007 menu and key section but how do you enter the keys A, B, C, D, E from the remote???
Normally, pretty good with these things but head-brick wall comes to mind .
cheers

It's like on a fone u dong, lol. You have to press the buttons more than once and they change to letters. e.g. 1 button could also be A B C depending how many times you press the button, just like texting on a phone.

[supermansgardener]

Hey! I've done everything but still not working! Followed all the intructions!
I'm on C&W (manchester) but everytime i go back into it, it comes up N*L! I've tried the default key thing! Does that mean im actually on N*L? If so which keys on the keymaster are the ones for me? Any help would be great!...need to get back to watching that amazing window wizard...:(

[stephen7762]

Hi, new to the world of forums. Would just like to thank the guys who obviously put a lot of time and effort into helping out those of us who are mere mortals

[adamsm]

Starview PPR.

Even with the new keys, it will not work on the Starview PVR, as when you enter the keys manually they just get overwritten by the Cable Provider to the incorrect dummy keys. Only way to stop the keys from been overwritten is to turn the Nagravision off, and again you wont see the coded channels.

Does anyone know a way so have the Nagravision on but not autoupdate the keys??

[mikerd]

I have updated and saved TW NTL and CW codes, but I still am getting updating and no channels on my The Box Super. Any suggestions what to try next?

[asgard]

cheers devilfish ..

[The Cobra]

I still cant get my 'The Box PVR' to work, have tried all the new keys for NTL (Pure) and also tried the others, TW and C+W but nothing working for me here in manchester. Hmmmm. Stuck.

[BHX]

Came back early hours of this morning from holiday, to find box down. Have now manually updated keys and working fine again. Thanks.

[eldiablo]

Thanks to all for a quick job!!!

[The Cobra]

Came back early hours of this morning from holiday, to find box down. Have now manually updated keys and working fine again. Thanks.

Has anyone got their 'The Box PVR' back working Id like to know? IM me if u have.

[eldiablo]

download this then run winrar,shud b ok then. Microsoft .NET Framework Version 2.0 Redistributable Package

[usmarshall11]

i have box pvr. what buttons on remote represent A-F when manually entering keys?

[k8rew]

Back up again on starview3...only need to update 00 codes.....yipee :laugh:

(I wonder how long this will last?)

[clockwork]

Thanx 4 that working fine now !!!

[gsandhu]

hi devilfish, i cant get all 16 digits on the key master, at the end of 13 digits i get something like this /<b>< you know what i am doing rong

[BHX]

Has anyone got their 'The Box PVR' back working Id like to know? IM me if u have.

Mine is the Starview 4 (The Box Super USB). I just manually entered the keys and it's working.

[adamsm]

Ive been using the telewest codes form the keygen program, perhaps I should try the pure ones....

[The Cobra]

Mine is the Starview 4 (The Box Super USB). I just manually entered the keys and it's working.

Mines a starview 2 I think. I've manually entered the codes but nothing happening, still not working, I live in Manchester btw.

[nsw9154]

:hmmmm: finaly got my pvr working this morning at 5am went to bed chuffed got back up at 12pm to find the keys had changed again entered new keys but still not working :stupid::hmmmm:

[bunns2003]

Hi i had the problem on my starview usb box, all the pay channels black, but have updated the key numbers using key master and now have pictures in background but still says data being updated plz help

[amandagreen27]

Hi,

Tried all the suggestions here for inputting keys manually and still no luck for me.

Any suggestions that would help me?

Thanks

[claires92]

Hi looked on Keymaster but there is no keys for ex N*L. Can you help?? Thanks.

[tony_i]

Hi looked on Keymaster but there is no keys for ex N*L. Can you help?? Thanks.

Use the Pure ones.

[BHX]

Mines a starview 2 I think. I've manually entered the codes but nothing happening, still not working, I live in Manchester btw.

I'm xTW, have just had to enter new (different) keys as they have changed again since I posted my reply.

[knocker]

what are pure codes sorry

[clit-eastwood]

ex ntl codes

[knocker]

i have downloaded keymaster its a page full of numbers and letters
how do i read the keys sorry im thick

[clit-eastwood]

If you are in cable wireless area use the cw keys....telewest use tw and ntl use pure ok?

[slapshot]

Mine (SV4) was working fine last night. Failed again today, latest codes aren't working. Birmingham area.

[justin]

thanks for the help it worked not for long but i reset with new codes again see how long it lasts this time. even a novice like me can manage ehh!

[BUCKINHAM]

:party :thanks for your help, i have got all my channels back, keeping fingers crossed that they stay that way: party

[knocker]

mine sorted too... for how long we shall see

[haroon1982]

Hi

Can anyone one, help I have tried to change my key to Telewest as I am in Yorkshire, but it keeps reverting to NTL and I click ok for it to store but it wont. Im new to the starview box any help would be grealt appreciated

[slapshot]

Hi

Can anyone one, help I have tried to change my key to Telewest as I am in Yorkshire, but it keeps reverting to NTL and I click ok for it to store but it wont. Im new to the starview box any help would be grealt appreciated

Mine did that last night, even though I'm in a TW area the providor code on the box was for NTL. I left the providor code alone and input the TW codes and it worked last night. Today however is a different story. Just try all the codes and see what works.

[haroon1982]

thank you so much your a star, i will copy the code and key it under ntl see if this works have a nice weekend

[SirPsychoSexy]

Hi

Can anyone one, help I have tried to change my key to Telewest as I am in Yorkshire, but it keeps reverting to NTL and I click ok for it to store but it wont. Im new to the starview box any help would be grealt appreciated
im having the same problem... im now mixing up codes and providers to see if i can get a picture... nothing yet...

keys worked this mornnig for a couple of mins then off again... keymaster updated the ex c&w codes earlier but they're not working at all for me

[SirPsychoSexy]

ok codes updated 10 mins ago, working again !!

[haroon1982]

Hi

There I have put the codes in by mixxing them up wont work, how did you get yours to work and I will try it on mine thanks

[karion]

I'm still struggling also but will keep trying

[haroon1982]

Hi Karion

My box keeps reverting to NTL so I changed the code on that to Telwests but still wont work, if you get it to work before I do let me know how you did it if I do I will let you know thanks

[perthman]

hi just discoverd this site so dont no a lot about it but hope to learn:party :

[garrycheung]

i have found the secret menue but have how do i know what key to put in? sorry guys please help the box is a starview not the box

[mikerd]

Just got mine working for the first time since yesterday. the codes have just been updated and that solved my problem!:ridinghorse:

[bunns2003]

hey guys i have updated the keys, and have latest firmware but once i go back 2 the tv, data is being updated comes up once change channel.... anyone else having this problem

i have checked and it has saved the key codes

[longstocking]

Would just like to say thank you for all your help with regards to the starview, talk about the greatest. Done everything you suggested and it's up and running again. Thank you once again... :flowers:

[ness]

do u know what the new codes are please let me lnow:goodpost:
Thanks to BigMaq for posting this. :)


STARVIEW STBs

~~~~ knows where i got this from ...http://www.de-crypt.net/forum/images/smilies/tinysmile_fatgrin_t2.png Just found it on my HDD ..thanks to original poster:


To put keys in manualy do as follows.
Press menu button


Press 1570 this takes you into secret menu.
Now hit ok on nagravision

Next make sure your cable provider is listed at top NTL or TELEWEST C&W ect

Now change key 00
(YOU MUST SAVE EACH KEY INDIVIDUALLY - I.E. AFTER CHANGING KEY 00 MAKE SURE
YOU STORE BEFORE CHANGING KEY 01 (TO STORE PRESS OK)


Right now change key 01 (To change between the 2 keys highlight key number press right and left )

Please Dont forget to store key again press ok

[katy d]

Thanx u so much for help with my starview 3 done all suggestions dowloaded keymaster but no luck only keys for ntl ulster we are england woud value any help in easy to understand english for absolute beginner don't know any shortcut jargon sorry

[mikerd]

the ntl codes are named 'pure' try that and it should work

[The Cobra]

Mine still not working on The Box PVR. Starting to do my nut in.

[afgan]

i have done exactly what you suggested meaning puttting the keys manually i the appropiate places but my box(the box super with rs232 connection)still is saying data updating and no pic.where am i going wrong
plz help for the love of god i need my box back
thanks

[dragon88]

Hi,
i am new to all of this and my starview 4 is having the same issue as everyone else i have read so far..
Sorry in advance if this has been answered but tried getting the key gen but no luck as i need to post something???
But would love to get this working.
Live in merseyside and on V***in and if anyone can post for me please on how to get it working that would be great:fisheye:

Looking forward to reading any response i get.

Hi Again
Got it working now... great forum and thank you everyone for their posts that helped me but if somebody can help my friend with the same issue but they have starview 3 box and the keys will not save

Cheers.

[excelence]

ilove you guys.. i got it working.. :)

[ab123456]

tried eveything still nothinh help:giveup:

[FoxForceFive]

Download the Keymaster from here.

http://www.digital-kaos.co.uk/forums/f10/new-keys-here-12850/

Run it & enter keys using the guide on page 1 of this thread.

It's not that hard kidda.

Oh, if you're in Liverpool you'll need the TW keys.

[fathead]

thanks very helpful

[mike33]

Please help here with the box pvr-put codes in ok but looked on keymaster for pure keys which i need but on key 1 there is one key to punch in missing at the end so anyone know how to leave this blank-every other batch of keys on all providers seems to be there without any missing.

[Turk]

Hi guys n gals
Were does it tell me what Starview the Box im using?
All i know is its Small and silver and i put1570 to get to the
secret menu , im using tw as my supply and id like to know
which method i should be using to put these new codes in?
Thanx Turk

[edward hitler]

I have a starview the box pvr, I have got it working by following the info on this site, just wanna say a big thank you to all

[Hotpicks]

Hi All,

Am in the same boat as everyone else :bawling:, have read every single post (some of them several times) and have followed the info given to the 'T' but have still had no luck (but then I am a girl lol), so I will forward the link to this website to my 'teccy' friend and my more intelligent other half and hope to goodness that between them they can find a/the solution that will help me (and them) once again enjoy television as it should be!!!

p.s this is a GREAT site - thank you to all that keep us updated and in the loop for all the hard work that you do :shakehands:

[DigiClone42]

YEAY!!! Using the PURE set of keys I'm back up and running on Virgin (NTL). Not sure for how long though. Thanks to the KeyMaster!

[kaizersoze]

Fantastic..Starview 4...entered the pure codes and sorted for the moment.

What Can i Say...great site

[bunns2003]

done everythin as advised on my starview super box usb, does anyone find that if they browsing through channels and go onto 1 of the 4 ppv channels it all gos wrong again - data is being updated

[SirPsychoSexy]

for those still having trouble i would take a look on youtube... if you were to search for... "starview enter keys" who knows what kind of tutorial videos may appear...

[wiserommer]

This tutorial for example...

YouTube - Starview : Enter Keys Manually

[SirPsychoSexy]

wow, what a find :p

[skylinegtr]

thnx m8.up and runnninng again.

[ivorlongone]

hi folks,,can you believe my bad luck.saved up too buy a starview 4 box never had one b4 .order'd it on the wednesday..and on thursday they all went down.my box was deliver'd friday and is just sitting laffin at me..i tried too follow the thread's but still no luck..in the menu it says 54-01..followed the codes but channels just updateing..i am so mega upset..o well just my luck.:beheaded:

[Hotpicks]

for those still having trouble i would take a look on youtube... if you were to search for... "starview enter keys" who knows what kind of tutorial videos may appear...

Hiya,

It's not the entering of the codes I have a problem with - i'm a pro at that lol - it's the actual 'Pure' codes that don't seem to work for me. Thanks for the great tip tho (maybe i'm just being a div) :hmmmm2:

To all those that are up and running well done and I am green with envy :congrats:

[claire123]

hi iam on ex cw what should i change the 00 key to is it 01
thanks claire and is this before i change the key numbers

[redmel59]

If you are in cable wireless area use the cw keys....telewest use tw and ntl use pure ok?

Is the provider code for Pure same as NTL - 54 01?

Ta

[deanobaggie]

Cant get used to this manual lark! new firmware soon i hope

[gibbo922]

mine dont even say updating anymore just bad or scrambled channel:mad:

[bunns2003]

can someone who has got theres working - prefereably a starview 4 usb super like mine, click on ppv events and see if it then goes back to data updating...

this is what mine does, so it is all working great, but concerned for future boxing which may miss out on as they seem to mess it up so just have to avoid them channels, otherwise just go to the secret menu and back up and all is well again

[bunns2003]

ignore my last message,,, all channels have gone now... data being updated on all premium and yes i have done all the advice givn, i have keymaster

[hussain143]

change provider to cw and put this key it should work

### DO NOT POST KEYS ###

[BigPaul]

Hi

I am new to the site and I have two boxes Starview 1 & 2 which are now not working. I would be very grateful for any help. I have never set my box manually so I will need some help.

I can get to the nagravision screen and select T****W I am not sure which is the key 00, is it part of the provider ID or Key Number or Key data.

Next make sure your cable provider is listed at top NTL or TELEWEST C&W ect

Many thanks in advance

BigPaul

[baldy17]

thank for the help this is a great site

[buddy2008]

Have ran keymaster starview say n*l but the key gen only has cw keys, tw keys, pure keys irelandntl keys etc have tried puting tw keys, with both change the provider coad but nother works help please

[tazmancblue]

Mine will now only save one lot of key numbers...the others come up with all FF, and will not save....help!!!!

[tazmancblue]

Mine will now only save one lot of key numbers...the others come up with all FF, and will not save....help!!!!

Suddenly it took them all after half an hour of not and all channels are back on!!! But for how long????

[Dj dee]

Hello every one,
Dee is my name, i dont know if i messed up when i registered.
I seem to be the only one who has not had a response with my problem.
My Digivox xl is not working well. I lost 3/4 of the channels.
Can some help please.

[thewizardofodds]

Hello every one,
Dee is my name, i dont know if i messed up when i registered.
I seem to be the only one who has not had a response with my problem.
My Digivox xl is not working well. I lost 3/4 of the channels.
Can some help please.

all the info is on the forum. have a search and a read.

[rayle]

Hi, i live in Manchester using the starview box & previouslys i got the same problem as others in this thread:
1. i managed to auto-scan the channels using teeW (but my provider is N*L)
2. Keyed in the 00 & 01 codes for N*L (using menu - 1570 - Nagra)
3. exit (3 times) to the channel & but the channel would always display [info: data is being updated 0 & sometimes until 120%] But nothing shown on the channel & the update kept repeating

I managed to SOLVE this by entering the codes for all three providers (N*L, teeW & ceeW).. and everything is back to normal..
Maybe u guys can do the same & who knows maybe it'll work :)

[redmel59]

Hi, i live in Manchester using the starview box & previouslys i got the same problem as others in this thread:
1. i managed to auto-scan the channels using teeW (but my provider is N*L)
2. Keyed in the 00 & 01 codes for N*L (using menu - 1570 - Nagra)
3. exit (3 times) to the channel & but the channel would always display [info: data is being updated 0 & sometimes until 120%] But nothing shown on the channel & the update kept repeating

I managed to SOLVE this by entering the codes for all three providers (N*L, teeW & ceeW).. and everything is back to normal..
Maybe u guys can do the same & who knows maybe it'll work :)

RAYLE you are an absolute ~~~~in genius, did just as you described and after 4 hours of frustration you cured it in 5 minutes!

I bow down and thank you

[toto67]

Hi, i live in Manchester using the starview box & previouslys i got the same problem as others in this thread:
1. i managed to auto-scan the channels using teeW (but my provider is N*L)
2. Keyed in the 00 & 01 codes for N*L (using menu - 1570 - Nagra)
3. exit (3 times) to the channel & but the channel would always display [info: data is being updated 0 & sometimes until 120%] But nothing shown on the channel & the update kept repeating

I managed to SOLVE this by entering the codes for all three providers (N*L, teeW & ceeW).. and everything is back to normal..
Maybe u guys can do the same & who knows maybe it'll work :)
May I be the first to congratulate your good self,first post and not even asking for dbox help but HELPING others with their problems...See there are newbies out there not here for a quick fix then ~~~~ off..Well done m8 and glad you sorted out your problem:top:

[redmel59]

May I be the first to congratulate your good self,first post and not even asking for dbox help but HELPING others with their problems...See there are newbies out there not here for a quick fix then ~~~~ off..Well done m8 and glad you sorted out your problem:top:

hear hear, well said :cheers:

[dave321]

i have tried all that but still no luck. i live in the stevenage area

[toto67]

i have tried all that but still no luck. i live in the stevenage areaSo what have you tried m8 and what box etc have you got?Ok I just read your other post..There aint no perm fix out as of yet so manual is the ONLY way to go..When you enter the keys and save it ,are the said keys still there when you go back and check them m8?

[dave321]

tried the 01 on the nagra and rescanned all channels but still no luck

[dave321]

im getting scrambled or bad channel and on some im getting illegakl box

[peter001]

Starview 3 the box , went in to put in keys supplied by keymasters , expecting 2 x lines BUT only have 1 line of numbers......any clues ?
many thanks for your hard work !

[thewizardofodds]

Starview 3 the box , went in to put in keys supplied by keymasters , expecting 2 x lines BUT only have 1 line of numbers......any clues ?
many thanks for your hard work !

highlight 00 then press left and right on remote (volume) to change between 00 and 01 edit and save each one

[dave321]

tried that but still no luck. HELP

[toto67]

Guys think we are going off topic here,why dont you start a thread m8 then its kept all together,just a suggestion btw

[peter001]

thanks wizard, finally got some channels....but they all begin with 3000, is there a way of getting my correct channel list back ?

[satansoft]

change provider to cw and put this key it should work

** ** ** ** ** ** ** **

Dont post Keys on here mate, you'll stir up a right shitstorm, and cause a whole heap of trouble for the forum. . .

[thewizardofodds]

thanks wizard, finally got some channels....but they all begin with 3000, is there a way of getting my correct channel list back ?


try a factory reset and scan again?

[nsw9154]

PLEASE READ THE POSTS ON HOW TO GET THE CODES sorry for shouting but if people read the forums and stoped asking stupid questions that had been answered 50 times before in the forums they would know how to input the codes :beerglass: i need a drink lol -- i have reset my codes every day go to bed zap have to reset i will go to bed and i am not expecting my MAN UNITED CITY match to be recorded on my Box pvr - such is life just go with the flow we are all in the same boat but it as still afloat thanks to this forum :):manuscarf: i hope they win hehehe lol

[bapu]

I think that some people are trying to encourage people to post keys on here!!

Who would do that? V!R&in spys...maybe, so they can close these educational forums down!!

[brickman]

nah,

more likely people who bought their box in the last 6 months like me, and dont know how to do the keymaster stuff etc. and havent got the patience to read through the excellent info thats already been gone over umpteen times.

all the info everyone needs is in the threads already posted peeps. give it a read first before posting as your question has probably been asked - and answered - before by someone.

[scrapper252]

bought my starview 4 box on tuesday and now its not working!keep reading all the posts but dont have a clue what everythin means ...ie keys????? can anyone help a useless idiot lol

[threedogs]

How do enter the secret menu on a pvr box, new to all this but Gr8 site !

[bluetate]

hello lads ,its my first time on the site and in need of some help,i have the star view 3,am in the tw area i have tried to get my box going again ,by doing what is posted on the first page(ie 00 01) but am getting no joy can anyone help thanks.

[bhovan]

Is there a cable pc card pci interface available for my computer?
Any direction will be most appreciated.

Many Thanks

[walshy009]

Hi, i live in Manchester using the starview box & previouslys i got the same problem as others in this thread:
1. i managed to auto-scan the channels using teeW (but my provider is N*L)
2. Keyed in the 00 & 01 codes for N*L (using menu - 1570 - Nagra)
3. exit (3 times) to the channel & but the channel would always display [info: data is being updated 0 & sometimes until 120%] But nothing shown on the channel & the update kept repeating

I managed to SOLVE this by entering the codes for all three providers (N*L, teeW & ceeW).. and everything is back to normal..
Maybe u guys can do the same & who knows maybe it'll work :)

Thank you sooooo much, :barscarf:

[BHX]

bought my starview 4 box on tuesday and now its not working!keep reading all the posts but dont have a clue what everythin means ...ie keys????? can anyone help a useless idiot lol

All the answers are there and it's in an idiots guide as well.

I mean you only have to be capable of reading English and run a small program that gives you the info to enter on the box, on the box you press a few buttons - and then away you go.

[mhd]

hi i am new to all this but what i have read has been great i hope i can fix my box with the info i found out once again thanx

[Villain]

I have had a Starview box for a couple of years but do not know what number it is, probably a 1? Can anyone give me any idea how to get it working again? As I said in my intr new to all this so apologies in advance if I am repeating a question someone else has asked!

[joneh]

ex ntl codes down again :S

[BHX]

xTW gone down here again!

[BHX]

xTW gone down here again!

Back up and running thanks to Keymaster.

[BHX]

VM are busy, just (recently) had another Key Roll.

[nisha.mistry]

this stupid box is doing my head in, can someone tell me where i can downlad the program like bigmaq because te keymaster link its given me doesnt work..
tah x

[stinky2]

we are up and running with keymaster, however the keys are good for a bit, and box go`s down again after a short while so i aquire the new keys from keymaster as generates diferent keys. can anyone say is this normal, do i keep putting the diferents keys in until we get the good ones, would this damage the box at all.
any info much apreciated..

[baldy17]

thanks for the replays

[BHX]

We are up and running with keymaster, however the keys are good for a bit, and box go`s down again after a short while so I acquire the new keys from keymaster as generates different keys. Can anyone say is this normal, do I keep putting the different keys in until we get the good ones, would this damage the box at all.

Any info much appreciated..


VM are just increasing the number of times they change the keys, hence the need to update them more.

Some boxes currently have a fix to the automatic updating of the keys as VM changed they way they updated them and causing issues for automated updates, hence the need for manual update recently.

You'll have to keep entering the keys until a automated fix for you box is available, no this won't damage the box, just that you are entering them yourself rather than the box automatically rolling.

[The Cobra]

Ok I figured what I was doing wrong, 1stly, I thought I was in NTL or Telewest area, when I was actually in C+W region. Second I turned off the 'auto update' feature on my 'The Box PVR' thinking that might help solve the problem, when in fact this stopped it updating at all. You live and learn, now back up and running feeling like a goon a bit for my silly mistakes.

[parto007]

thx for the info 4 manual input ...how do i get the latest codes ?

[dingo1]

i just updated with the key master.. worked for 5 minutes... now im back to square 1.. no channels apart from freeview ones... can anyone help plz

[legendshane78]

Help trying to get the box3 working. installed new software. But need keys, What is Keymaster, where do i get it?? Cheers

[bdpblue]

My box has gone off and I need to download the keys can anyone point me in the right direction?

[dpdave]

thnx for that lost original instructions on hoe to do it

[nsw9154]

KEY MASTER has stoped uploading keys because people - oops should i say tosspots are charging ?5 for them on ebay :evil::shot::puke: :toilet:

[jono10]

Many Thanks Devilfish, all smiles again lol lol

[taximan]

new keymaster 1.2 ready for download on chatterbox

[Dangermouse12]

Sorry, I am completely incompetent at this. Can you talk me through blow by blow on how to manually re-tune my starview 2?!?

[Dangermouse12]

Could you explain this more, I don't think I am doing it right. What do I change 00 to?

[popye]

Hi

you have given details on how to change keys, but where are the keys themselves, i.e. where can one find them.

thanks

popye

[BUCKINHAM]

Hi, you can get the keys from keymaster, if you have trouble getting them let me know, and if you have no objections, i could email them to you. i cannot actually put them on the forum, as rules do not allow it:devil:
i hope that you manage to get them either way

[stelcity]

Hi all can someone please please help me I cannot unzip the keycode file and I dont know how to get the updated codes can anyone e mail them to me. My collegue has got them but wont share! Tw***

[stelcity]

Hi, you can get the keys from keymaster, if you have trouble getting them let me know, and if you have no objections, i could email them to you. i cannot actually put them on the forum, as rules do not allow it:devil:
i hope that you manage to get them either way

Can you e mail to me am desperate!

[gsmatlfc]

Hi new to this. tryin to suss all is out.

[gsmatlfc]

can't seem to open the rar file on one of the post with codes..says I may not have priveliges ...any idea what I need to do. or can someone email me the codes for TW ?

[hughkay]

can't seem to open the rar file on one of the post with codes..says I may not have priveliges ...any idea what I need to do. or can someone email me the codes for TW ?



Hi to all

can anyone email me ..thanks in advance

[loonytoon]

Hi to all, this is my first time on a forum like this. Can anyone tell me if its better manually updating the keys or should i try and download the firmware? Thaks in advance

[crypticdragon]

:giveup:
Literally am about to with my starview super box 4

[BHX]

:giveup:
Literally am about to with my starview super box 4

SV4 is a piece of cake, couldn't be any easier.

Just update to the latest Firmware, go into the hidden menu switch on Keycode and it should be away you go. If not you may have to enter the first set of keys manually.

[BUCKINHAM]

if you do not mind sending me your email address, i will send you the keymaster files, as i cannot post them on here
Regards Dave

[paulmac]

hi Dave,
i am new here as well and seem to be having a similar problem!!!

any help would be great

thanx

[thefat1]

thanks for the info.

[chorizo]

Hi Devilfish

I have tried your advice. Firstly it did not recognize 1570 and secondly it block the channel list. I am not able to get to the channel list. It bypasses parental control and channel edit. Can you help please. I can't even get the terrestrial channels.

Chorizo