Peugeot 407 Mileage not found in Softwares

[Amine13]

Hello Mates !
here is a BSI file of 407 BSI, want to reset, I didn't removed dash yet, but hope reset bsi first.
Didn(t found the bsi in tacho softwares.
BSI type is johnson controls, ver 05.01.
attached the file.
actual mileage is 104619 km.
Hope PremierD is arround !!
BEst regards.

[PremierD]

Hello Mates !
here is a BSI file of 407 BSI, want to reset, I didn't removed dash yet, but hope reset bsi first.
Didn(t found the bsi in tacho softwares.
BSI type is johnson controls, ver 05.01.
attached the file.
actual mileage is 104619 km.
Hope PremierD is arround !!
BEst regards.

Yep and is this the invisable dump One ... lol

[PremierD]

Works better when you attach the dump mate ... Zero miles ...

[Amine13]

Yep and is this the invisable dump One ... lol
:D:D:D:D:D
Sorry PremierD !!
Now removing dash !!!

[Amine13]

here is the dash file, is siemens 93C66.
Thanks again PremierD.

[Amine13]

for info, sorry, the dash is VDO it's written on its back !didn't see that !

[PremierD]

here is the dash file, is siemens 93C66.
Thanks again PremierD.

Now another leading question mate .... what do you want it to say ....?

[Amine13]

sorry mate, like usual, sometimes we got lasy !!
I want 94 000 km on it !!!

[PremierD]

Should be close mate ... but when doing these I usually put the same in the BSI as in the dash ...

[Amine13]

SO mate, what do you suggest ? can you make the bsi file with same mileage ? or should I paste as is ?
Regards.

[PremierD]

I'll give you the miles in the BSI aswell .. give me ten mate ...

[PremierD]

there you go mate 94k...

[Amine13]

Well mate, a question before I leave making the job. Once finsihed, put all back, is there any tips for mounting bsi and dash order ??
I mean, who first, or put both, than plug +battery back ??
Regards.

[drpeter]

Well mate, a question before I leave making the job. Once finsihed, put all back, is there any tips for mounting bsi and dash order ??
I mean, who first, or put both, than plug +battery back ??
Regards.


First BSI then dash then battery.

[Amine13]

Simply Awesome Guys; it works !!! :D
Special thanks to PremierD.

[Amine13]

SOrry PremierD, either I did a mistake somewhere, or something wrong ina file, all ok, but no needle working !!! :s

[Amine13]

test post message
You didn't found any other place mate to post your message ?!!!!!
Rather introduce yourself in the right section!!

[PremierD]

SOrry PremierD, either I did a mistake somewhere, or something wrong ina file, all ok, but no needle working !!! :s

When you put the needles back on did you make sure that they did'nt touch the back plate ...?

[Amine13]

When you put the needles back on did you make sure that they did'nt touch the back plate ...?
NO mate, they're parallel and far arround 2 mm.

[PremierD]

NO mate, they're parallel and far arround 2 mm.

I'll check your dump again later mate ... but it did look fine ...

[Amine13]

Hi again, checked the soldering, all seem ok, scanned through PPS, BSI presented an unknown fault which I erased successefully, instrument no faults code !!
PremierD; What about if Put the file for bsi with 00000??!
Regards.

[PremierD]

Dont think thats the problem mate ....If the K'ms are correct then its nothing to do with what was changed (I hope ) .... Can you read and post the c66 again... with whats in it now ....?
Also there are a few small SM components close to the eeprom ..they havent moved ...?

[Amine13]

Dont think thats the problem mate ....If the K'ms are correct then its nothing to do with what was changed (I hope ) .... Can you read and post the c66 again... with whats in it now ....?
Also there are a few small SM components close to the eeprom ..they havent moved ...?
Will check it right now mate :)

[Amine13]

The resistances you told me about were present, I took care not to remove them by air flow. attached is the dash file after test and no needle work.

[PremierD]

The dump I sent and the one you just sent are Identical mate .. only thing different from them and your original is the top two lines where the Miles were edited .... very strange phenominon....not really sure and to check it you would need to put back the original to see if it works then .. what a fcuker mate ...Unless anyone else has come across it ...

[diga1]

it is possible that you didnt press the needels enugh inn and they are tuching the cluster glass try vithout front glass and see vath happens.

[Amine13]

it is possible that you didnt press the needels enugh inn and they are tuching the cluster glass try vithout front glass and see vath happens.
No mate, I pressed it very well, until felt it's on the limit, and the needles are far from both background and the Glass. I Scanned it through PPS, and tried to activate needles with no success, more strange, NO FAULT CODES !!!
Now, the thing is, that I have to put back both original files, and see (and hope ) they will work !!!! :D
Anyway, your help 'especially you PremierD) is very very appreciated !!
The guy just took the car, he needs it for tomorrow morning, then he will bring it back to me after midday, then let's see what this *******er says (the dash :D) !!!
All the best !!

[Amine13]

News Just come, here the file i read today from the 407 dashboard, by the way it's 2007 year, sorry mates (PremierD and the pals :D);
Attached file is 94547 Km, when compared most lines are different, any Idea mates ?
REgards.

[PremierD]

News Just come, here the file i read today from the 407 dashboard, by the way it's 2007 year, sorry mates (PremierD and the pals :D);
Attached file is 94547 Km, when compared most lines are different, any Idea mates ?
REgards.

You are correct mate .. all the lines are different ... lol lol
----------------------------------------------
________________________--------..............

[Amine13]

Well guys, here I will desolder and read 95128 from bsi, give me some moments !!

[Amine13]

Here is the bsi 95128 with 94547 km, I'm surprised that dozen of lines are different !!!!!!!!
AGAIN, sorry to you, i'm really confused guys, here is dump from dash; lol !

[PremierD]

Here is the bsi 95128 with 94547 km, I'm surprised that dozen of lines are different !!!!!!!!
AGAIN, sorry to you, i'm really confused guys, here is dump from dash; lol !

before we start mate ... did you check the motors ...?

[Amine13]

before we start mate ... did you check the motors ...?
I Just reopened the dash, and see if there is some broken part, bad soldering, missing resistor, and see as well at motors, looks appearently fine.
Is there any particular method to check motors, I'm total newbie in the field !!

[PremierD]

I Just reopened the dash, and see if there is some broken part, bad soldering, missing resistor, and see as well at motors, looks appearently fine.
Is there any particular method to check motors, I'm total newbie in the field !!
not the easiest thing to do mate .. when you rotate the needles they have a positive stop ...?

[Amine13]

not the easiest thing to do mate .. when you rotate the needles they have a positive stop ...?
YES!
They have; just the oil temperature gauje seems little hard to move...

[Amine13]

BAd news guys, restored old files, original mileage displayed, but no needles at all. really sad !

[leowii]

the car engine works ?

[Amine13]

yes, starts from first run.

[z786]

jus out of curiosity, did you try 2 read any other chips on this dash?

[Tobby_35]

BAd news guys, restored old files, original mileage displayed, but no needles at all. really sad !

Friend do not get sad, is not difficult to solve. Just disassemble the engine needle and fit gear and reassemble!!!!

Greetings!!!!

[leowii]

your dash dump looks trash, all needles bad ???? is dump!
Bsi looks OK

use this one for dash, BSI is the same file look ok.


sorry cant upload files, dont know why.....

[Amine13]

jus out of curiosity, did you try 2 read any other chips on this dash?
No mate, just read the 93C66 which holds mileage data.


for Tobby-35, thanks for your support; do you think, just gears are displaced ??

@Leowii, I'm Sure PremierD dumps are ok because he changed only mileage lines, and after read, found out that a lot of lines are different , And something wrong with needles motors

Regards to ALL !!

[leowii]

hello, i only say that dash dump is corrupt because i have several 407 dash dumps and all looks like the same, 2 or 3 bytes diferent, but when compare whith your dash dump all is diferent, so my ideia is that the 1? read was wrong....... :hmmmm:
use the tacho dump that i upload and post results, the bsi file is the same, looks ok, all files is 94000

[Tobby_35]

[QUOTE=Amine13;655226]No mate, just read the 93C66 which holds mileage data.


for Tobby-35, thanks for your support; do you think, just gears are displaced ??

QUOTE]
Yes my friend, if you pull hard out of place!!
Disarm one and check!!!

Regards

[Amine13]

[QUOTE=Amine13;655226]No mate, just read the 93C66 which holds mileage data.


for Tobby-35, thanks for your support; do you think, just gears are displaced ??

QUOTE]
Yes my friend, if you pull hard out of place!!
Disarm one and check!!!

Regards





HI guys; Big thanks to you ALL !!
as I'm a newbie in this, I followed advices of Tobby and desarmed one motor, and guess what I found, misplaced gear because of hard pulling, joined the photo here,
Put PremierD files (Thanks Tacho MAster !! :D), and all run fine.
Again thanks for All.
@ Leowii, the file you sent me mate didn't displayed the LCD screen, maybe something wrong. Thanks anyway for your good help.
All the best for All !!

[leowii]

hello, other dash model, but is a 407, glad you can handle the problem.

regards

[Tobby_35]

I?m glad!!!:girl: