cluster removal C3 picasso 2009

[drpeter]

Anybody knows how to to remove this cluster see picture.

Customer said it is a C3 but it is a C3 picasso, total different car :-).

Ca'n 't find any screw and it looks breakable.

Thanks,

Peter

[Meat-Head]

No but as a rule of thumb anything french, closes eyes and yank.

Have a word with user scarymistake do beleive if he can't help with some info then just yank.

Keep meaning to look for a electronic parts catalogue sometimes exploded diagramms are great

[drpeter]

No but as a rule of thumb anything french, closes eyes and yank.

Have a word with user scarymistake do beleive if he can't help with some info then just yank.

Keep meaning to look for a electronic parts catalogue sometimes exploded diagramms are great

The problem is time, customer was waiting I sent him away, first sort things out :-).

I saw 2 small holes right under the window behind the dash, in the air fan housing. I think I had to put something in it to unlock the fan housing and get acces to the cluster screws.

[z786]

nowadays its not mileage correction, its safe cracking
http://t2.gstatic.com/images?q=tbn:Xo_-yz8Q1MRKkM:http://www.bmcfs.net/Pics/safe.jpg (http://www.google.co.uk/imgres?imgurl=http://www.bmcfs.net/Pics/safe.jpg&imgrefurl=http://www.bmcfs.net/safe.asp&usg=__puaWCFktXkHPCgcUF4Krc8Zy6FY=&h=1160&w=1188&sz=89&hl=en&start=9&um=1&itbs=1&tbnid=Xo_-yz8Q1MRKkM:&tbnh=146&tbnw=150&prev=/images%3Fq%3Dsafe%26um%3D1%26hl%3Den%26sa%3DN%26tb s%3Disch:1)

[cjawahir]

take a look at this

Citroen Xsara Picasso Instrument cluster / dash / dashboard
http://www.ecutesting.com/dash_citroen_small_copy.jpg

cj

[frontpager]

Did you have any joy with removing this dash ?
I have one to do now and it does not look nice.
Pager.

[javilette]

can you to try to remove in the same way of citroen c4??????

[n599fbm]

Hi guys !!

Perhaps be same to the C4 dash,

See the picture,

Rgds,

C.

[frontpager]

I'll give it another try tomorrow and leet you know.
Pager.

[sparkz02]

Any luck with the c4 clocks?

[dave11674]

hi guys
had a c3 2009 in yesterday

ok if you look at the back of the clocks you will see 2 holes
push a screw driver a few inch into this hole and u will feel the clips move back and release, leave screwdrive there and pull the clocks forward.
now the venting at the back comes out with the clocks, so pull it up slightly.
now the front part is the tightest.
i was pulling at it for an hour b4 i put my trim tool down the left side and popped it straight upwards.
do same for other right side.

the clocks had a 95020 eeprom in them.
please note the eeprom is in the right hand display pcb, the display that has the mialge in it, be very carefull of the ribbon !
there is also a 95020 in the left hand display pcb, nothing is stored in this.
the BSI is taken out as per usual, behind the glove box.

have fun.

dave

[felix_fetche]

Here it is,
check pictures,
Have Fun M8's !

[cubica1]

front side...
dash 95020, BSI AT24c128 ( both to same km new values )
rgds,
cuby