seat cordoba 2004

[pinky1970]

i have a tacho 2008, pdf shown to put OBD2 vw dio plug and select golf 4 diagnostic. wont read. i did a passat b7 the other day and did with a can dongle and vw can cable and select golf 5.

Has anyone reprogram a seat cordoba 2004 with tacho 2008, if so could you tell me which cable to use and what to select on the tacho 2008. many thanks.:questionmark:

[leowii]

the normal obd2 cable, is not CAN, if not read only by "hand" in the eeprom with that tool, or use a original DigaPro, Enigma.......

[pinky1970]

Please can anyone help me, how do I remove the speedo needle, rev needle, temp and fuel needle. They won't pull off is there a tool or special way to take them off. I need to get to the 93c86 under the speedo white plastic.

[GolfmkI]

I have tried in so many cordobas and ibizas year 2004 and no luck with tacho universal, at least with clone one.

This cars I have made, removing needles carrefully, and programming the eeprom inside, there is a menu in tacho universal for programming this way. Cannot be done with tacho via OBD .

Needles could be removed, unclockwise and pullig it at the same time, I had never problem in this car this way, perhaps someone could tell us a trick.

[gjuzel]

seat cordoba before 2008 done with Super VAG K+CAN V4.8 work perfect.via obd.