PDA

View Full Version : VCDS 908.0 German



ManXth
27th June, 2010, 01:22 PM
Hello,

does someone have vcds 908.0 cracked in german? i use vag-com 908.0 and it works but it is in english, if i install vcds 908.2 from ross tech it detects my cable too but it says no connection with car. i tried also ignition off and on and then to connect but it doesnt work. and all i want is that i have 908.0 in german. please,does someone have? i think the cable is a china clone vag 908 because i got it with a little cd where vag 908.0 software was in.

Ill be very thankful

kind regards

miouser
28th June, 2010, 08:46 PM
deleted --- links down :(

hcsaibot
29th June, 2010, 06:04 PM
Hello,

does someone have vcds 908.0 cracked in german? i use vag-com 908.0 and it works but it is in english, if i install vcds 908.2 from ross tech it detects my cable too but it says no connection with car. i tried also ignition off and on and then to connect but it doesnt work. and all i want is that i have 908.0 in german. please,does someone have? i think the cable is a china clone vag 908 because i got it with a little cd where vag 908.0 software was in.

Ill be very thankful

kind regards

i think your interface is broken don?t use a clone interface with genuie Software.
You can flash it to German when the SPIEN Fuse at the ATmega is enable.

MarcoOX
21st July, 2010, 10:43 AM
Hello,

does someone have vcds 908.0 cracked in german? i use vag-com 908.0 and it works but it is in english, if i install vcds 908.2 from ross tech it detects my cable too but it says no connection with car. i tried also ignition off and on and then to connect but it doesnt work. and all i want is that i have 908.0 in german. please,does someone have? i think the cable is a china clone vag 908 because i got it with a little cd where vag 908.0 software was in.

Ill be very thankful

kind regards
Hi, I have exactly the same problem. have you found a solution? Gruss Marco

mrgaga
21st August, 2010, 10:11 PM
hier http://www.digital-kaos.co.uk/forums/f123/vcds-908-german-dump-installer-125865/
Anleitung: Tutorial , VCDS 805 programming and upgrading (http://www.digital-kaos.co.uk/forums/f123/tutorial-vcds-805-programming-upgrading-63375)
links does not go...
you do not have permission to access this page.??????

IchBins
23rd August, 2010, 07:20 PM
hier http://www.digital-kaos.co.uk/forums/f123/vcds-908-german-dump-installer-125865/
Anleitung: Tutorial , VCDS 805 programming and upgrading (http://www.digital-kaos.co.uk/forums/f123/tutorial-vcds-805-programming-upgrading-63375)


Can somebody these instructions reupload or send to me by PM?:damnmate:

vares
23rd August, 2010, 11:28 PM
Find users RSIBIZA und ich denke, es wird dir helfen.

mpmichu
24th August, 2010, 07:46 AM
Find users RSIBIZA und ich denke, es wird dir helfen.
Hello.
Can somebody these instructions reupload because I do not have permission to access this page:
hier http://www.digital-kaos.co.uk/forums...taller-125865/ (http://www.digital-kaos.co.uk/forums/f123/vcds-908-german-dump-installer-125865/)
Anleitung: Tutorial , VCDS 805 programming and upgrading (http://www.digital-kaos.co.uk/forums/f123/tutorial-vcds-805-programming-upgrading-63375)

rsibiza
24th August, 2010, 10:16 PM
Hello.
Can somebody these instructions reupload because I do not have permission to access this page:
hier http://www.digital-kaos.co.uk/forums...taller-125865/ (http://www.digital-kaos.co.uk/forums/f123/vcds-908-german-dump-installer-125865/)
Anleitung: Tutorial , VCDS 805 programming and upgrading (http://www.digital-kaos.co.uk/forums/f123/tutorial-vcds-805-programming-upgrading-63375)



Hi poeple.

I will look how i can do that,but for sure i wont upload any soft or dump.

Just a tuto how to flash atmega162...and 93c46...ftdi.

If it was removed,there was a reason...i dont wanna work against a mod here here.

So if info is needet,i do...if dumps are needet...i am out!

mitja
25th August, 2010, 07:59 AM
Hi rsibiza.

That was your greatest post. Can you post only images again :)

Tutorial about repairing or upgrading VAG COM interface with 1.78/.179 firmware working with VCDS 805/812 english version.

Firstly we must supply the interface with a voltage of 12 volts , for this we solder 2 wire on 7805 regulator like the picture :
Attachment 6312 (http://www.digital-kaos.co.uk/forums/attachments/f123/6312-tutorial-vcds-805-programming-upgrading-dsc024092.jpg)

After we must connect the ATMEGA 162 ship with port LPT of the PC to program it as shown on this pictures :
Attachment 12129 (http://www.digital-kaos.co.uk/forums/attachments/f123/12129-tutorial-vcds-805-programming-upgrading-schema_v2.jpg)
Attachment 6313 (http://www.digital-kaos.co.uk/forums/attachments/f123/6313-tutorial-vcds-805-programming-upgrading-dsc02420.jpg)
Attachment 6315 (http://www.digital-kaos.co.uk/forums/attachments/f123/6315-tutorial-vcds-805-programming-upgrading-dsc02459.jpg)

if you have no LPT port you can use USB programmer as explained on rs_ibizas post (http://www.digital-kaos.co.uk/forums/f104/tutorial-vcds-805-programming-upgrading-63375/index35.html#post461071)

Final result :
Attachment 6316 (http://www.digital-kaos.co.uk/forums/attachments/f123/6316-tutorial-vcds-805-programming-upgrading-dsc02501.jpg)
The airbag controller is not needed , i use it only to test the interface.

IchBins
25th August, 2010, 08:15 PM
Find users RSIBIZA und ich denke, es wird dir helfen.

Danke f?r die Info, nun muss ich ja nicht mehr suchen. :top:

to rsibiza,

I need none software, only info to programming atmega over LTP-Port, set fuses etc.

thanks

mrgaga
26th August, 2010, 05:10 PM
mrgaga, you do not have permission to access this page. This could be due to one of several reasons:


Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation. Check your registered email address for an activation link.
If you are trying to download files from the download section or download attachments, you are required to post on the forums before gaining access. After posting, your account will be upgraded within 15 minutes. Please don't post asking why you can't download, if you have posted, permission will be automatically granted.


Why????
can somebody read the links??

webmarc
26th August, 2010, 07:18 PM
I think some mods have deleted anything that has to do with vcds dumps.

You get this message because the thread doesn`t exist anymore (I think)

elcodelau
26th August, 2010, 10:32 PM
i have a vag com 908 dual k & can china clone . working great whith vcds 908.1 908.2 ro .after upgrade program to vcds 1010 interface say :vag com hex can interface found not conected to the car. i have dump for atmega and ept for ft232 rl . how to reprogram this clone to be never bloked over the internet conection and i can use software from rosstech.

thanks

bombheads12
26th August, 2010, 10:58 PM
Vag com umm a minefield of useless leads (so far ive tried 3 lol) but why do they charge so much for the software $350 is really a but steep these days !

webmarc
27th August, 2010, 07:38 PM
The price is very very low. When you bought the interface 6 years ago, you are still able to connect to every vag car (and use every function) till today.

ghicicine
27th August, 2010, 09:59 PM
Danke f?r die Info, nun muss ich ja nicht mehr suchen. :top:

to rsibiza,

I need none software, only info to programming atmega over LTP-Port, set fuses etc.

thanksIf you have not found yet this info's, PM me your e-mail and I will send you something about programming atmega 162.Regards.

pachario
29th August, 2010, 10:41 PM
Hello
can someone help? I locked my cable Vag com 908, you can unlock? and a software upgrade to newly suitable for Skoda Octavia Scout year 2010?

mitja
30th August, 2010, 04:35 PM
Tutorial about repairing or upgrading VAG COM interface with 1.78/.179 firmware working with VCDS 805/812 english version.[/quote]

I fount this recipe (translated from italian) :)

Vag upgrade
(http://translate.googleusercontent.com/translate_c?hl=sl&ie=UTF-8&sl=it&tl=en&u=http://forum.audirsclub.it/showthread.php%3F15239-Vag-Com-come-eviatare-rotture-e-riparare-i-cloni/page3&prev=_t&rurl=translate.google.com&usg=ALkJrhgXsmhJKjVOfuS6CY90LiBuhQ1jfQ)

golf1gti
1st September, 2010, 05:33 PM
we wait for working link.:barscarf:

dariusddj
5th September, 2010, 04:15 PM
i need dump for 908.2 ro
tanks

webmarc
5th September, 2010, 07:21 PM
Could someone please PM me a working link to the working german 908 dump posted here for a while.

Thanks

ghicicine
6th September, 2010, 10:03 PM
PM me your email.I will help you.

girolamodisidisi
10th September, 2010, 10:26 PM
Hi !
i use vcds 908.0 cable with english version.i try to acces edc16 controller at AUDI A6 2002.i cant read this mileage information.By the way..when i conect interface to car ,and run test ,comunication CAN is not OK! I wander why hapend this? this car have't CAN comunication ,or samsing wrong with my interface?
thanks in advance.

bibkare
19th September, 2010, 11:38 AM
Hi !
i use vcds 908.0 cable with english version.i try to acces edc16 controller at AUDI A6 2002.i cant read this mileage information.By the way..when i conect interface to car ,and run test ,comunication CAN is not OK! I wander why hapend this? this car have't CAN comunication ,or samsing wrong with my interface?
thanks in advance.

Read this thread http://www.digital-kaos.co.uk/forums/f152/vag-com-vcds-everything-99750/ , also are you sure that this car is EDC16

sestec
23rd September, 2010, 11:31 PM
Could someone please PM me a working link to the working german 908 dump and description posted here for a while.

Thanks Thanks Thanks

sestec
23rd September, 2010, 11:36 PM
If you have not found yet this info's, PM me your e-mail and I will send you something about programming atmega 162.Regards.
can you help me please?

sestec
23rd September, 2010, 11:45 PM
hier http://www.digital-kaos.co.uk/forums/f123/vcds-908-german-dump-installer-125865/
Anleitung: Tutorial , VCDS 805 programming and upgrading (http://www.digital-kaos.co.uk/forums/f123/tutorial-vcds-805-programming-upgrading-63375)
ich kann die Dateien nicht herunterladen. kann du mir helfen. danke

sestec
23rd September, 2010, 11:48 PM
Can somebody these instructions reupload or send to me by PM?:damnmate:

Hallo
konntest du die dateien heurunterladen?
kannst du mir weiter helfen.
danke...

ghicicine
24th September, 2010, 09:31 AM
Check your e-mail inbox...

mariusnegru
2nd October, 2010, 08:38 PM
i need dump for 908.2 ro. please help me. thanks alot.

herzog
12th October, 2010, 05:06 PM
ich kann die Dateien nicht herunterladen. kann du mir helfen. danke

kann mir jemand auch ein link auf PM schiken ?? bitte

908.0 Deutsch Dump mit installer

herzog
12th October, 2010, 05:15 PM
hier http://www.digital-kaos.co.uk/forums/f123/vcds-908-german-dump-installer-125865/
Anleitung: Tutorial , VCDS 805 programming and upgrading (http://www.digital-kaos.co.uk/forums/f123/tutorial-vcds-805-programming-upgrading-63375)

die links funktionieren nicht :motz:

Golfoid
13th October, 2010, 06:21 PM
Is there another working link for a 908dump?

rsibiza
16th October, 2010, 12:40 AM
http://www.digital-kaos.co.uk/forums/f154/updating-atmega162-vcds-other-interfaces-166596/#post806195

Schrauber
16th October, 2010, 09:47 AM
can someone send me a working link for german dump via pm?

dirk32
16th October, 2010, 06:35 PM
can someone send me a working link for german dump via pm?

Search Button!!!!

hirobi
26th October, 2010, 02:48 AM
Did the german dump posted by rsibiza ever work for anyone? Or was it just a hoax?

tobygolf66
19th December, 2010, 12:57 PM
PM me your email.I will help you.
i hate the china clone cable. nothing going only ftdi vid and pid number driver is to see.

zakdk
27th December, 2010, 10:35 AM
i think your interface is broken don?t use a clone interface with genuie Software.
You can flash it to German when the SPIEN Fuse at the
ATmega is enable.


i think your interface is broken don?t use a clone interface with genuie Software.
You can flash it to German when the SPIEN Fuse at the ATmega is enable.

benzerrouki
27th December, 2010, 11:02 AM
Hi , need french dump is it possible, can somone upload it
Thanks.

Golfoid
7th January, 2011, 04:15 PM
is there any workin 908 german dump out there.
i would be glad for PM.

gui62112
9th January, 2011, 02:02 AM
where are the links ?

Ontige
9th January, 2011, 05:46 PM
is there any workin 908 german dump out there.
i would be glad for PM.

Same question, can?t find working link`s even after intensive search... :|

supermario333333
23rd January, 2011, 09:54 PM
Can I use the original 908 VCDS after rebrand (from the 805) or I need a cracked chinese verison of VCDS ?

thx

highline
6th February, 2011, 10:52 PM
Hello
Find a German software and
files for my Hex Can 704 with FDTI BL Can. please someone help me there.
highline

HSN
14th February, 2011, 03:49 AM
GERMAN DUMP 908 ???

WHERE CAN WE FIND IT?

rancoxxx
20th February, 2011, 05:01 AM
where can I find VCDS 10.6.0 German???? thx

Golfoid
14th March, 2011, 01:22 PM
can someone fill my inbox with the working german 908 dumps ... pleeeeeeease :)

LuisAndre
14th March, 2011, 06:12 PM
can someone fill my inbox with the working german 908 dumps ... pleeeeeeease :)


You don't need german dump... You need to crack vcds german version... I've done it on the portuguese version.

On the first screen, you can see it shows "Not Registered / Shereware version"... and the second screen it is from the same software version (cracked) and with the same cable, and it's full registered!!!

Don't know if it helps, but i'll give you the part of the code you need to watch to make your cable registered:

00466944 |8BBE D4030000 MOV EDI,DWORD PTR DS:[ESI+3D4]
0046694A |399E DC030000 CMP DWORD PTR DS:[ESI+3DC],EBX
00466950 |75 08 JNZ SHORT 0046695A ; vcds.0046695A
00466952 |3986 E0030000 CMP DWORD PTR DS:[ESI+3E0],EAX
00466958 |74 07 JE SHORT 00466961 ; vcds.00466961
0046695A |C686 B8030000 0>MOV BYTE PTR DS:[ESI+3B8],1
00466961 \8BCE MOV ECX,ESI
00466963 E8 690B0000 CALL 004674D1 ; vcds.004674D1
00466968 84C0 TEST AL,AL
0046696A 75 05 JNZ SHORT 00466971 ; vcds.00466971

This is from 805.1 version but for the 908 it's almost the same.

BR,


Andre

Maartinj
14th March, 2011, 07:36 PM
What software u use to edit VCDS ?

LuisAndre
14th March, 2011, 10:11 PM
What software u use to edit VCDS ?


Ollydbg.


BR

Maartinj
15th March, 2011, 02:45 PM
Any screens from your mod? in my there is no address begin 00466xx.. only 017xxxx You edit installed software or dump ?

LuisAndre
15th March, 2011, 03:03 PM
Any screens from your mod? in my there is no address begin 00466xx.. only 017xxxx You edit installed software or dump ?


Only the software (vcds.exe)... i didnt change a thing on the dumps from the cable...

All the english vcds versions i have seen so far, were packed with pcguard 5 and on the portuguese versions, with winlicense/themida 2xx. As i dont have any german version to analyze, you need to be aware of two things : 1 - see if your file is packed and 2 - search the code and not the address.

mr--x
15th March, 2011, 11:42 PM
I have a german 908 version here.

But I can't find anything of your code there.
I havn't work with ollydbg before. May be I do a wrong search.
Can you tell me a link to the your portugese version?
I can test it with this version first.

By the way...
You have to connect first to the car with the 908 version. Is there no problem with an 805 cable to connect?
I don't want to delete the data stored in my 805 cable in case of connecting to other (newer) VCDS versions.

LuisAndre
16th March, 2011, 01:29 AM
I don't think you can use a 805 cable on a 908 version... As i remember, you'll end up with some message like "cable not found" and exit without even showing the main screen.

If you need, i can take a look on your version, because if you dont know how to use ollydbg... how can i say this nicely... it's not easy.


What i have learned from the tests i have made, is that if you use a version that is not recognizing your cable as a full registered version, it will damage your cable and if you try to read the faults on any ecu you will only see 1 or 2 faults fully discribed... from the other faults you can only see some shareware message telling that you are not using a registered cable. Then, when you re-plug your cable, it will be dead and you will need to plug it to a life support machine to keep it breathing. :nurse:
However... if you change one address of the memory used on the program, from 0 to 1, you will make your cable registered.


:itsme:


BR,

Andre

mr--x
16th March, 2011, 03:06 AM
Hello Andre...
Thanks for the fast reply.
But if I reprogramm the interface with english 9.08 Dump, it should be possible, or what do you think?

Thank you :)

knuffifix
16th March, 2011, 10:41 PM
Thanks for de loader!

Can you send me the password, please?

noelmarlon
22nd March, 2011, 08:08 PM
hat jemand den deutschen dump um das 805er cabel auf 908 zu pachen?

proximate
9th June, 2011, 07:55 PM
i have a vag com 908 dual k & can china clone . working great whith vcds 908.1 908.2 ro .after upgrade program to vcds 1010 interface say :vag com hex can interface found not conected to the car. i have dump for atmega and ept for ft232 rl . how to reprogram this clone to be never bloked over the internet conection and i can use software from rosstech.

thanks

I think your clone is broken down. You will never find a clone-cable that works registered with original software from rosstech. Clone-cables are modified and dongle is adapted to this software you got with your clone.

You can reflash your cable with original files (If you have).