partnership offer

[matarelec]

Hi mates,
who needs a patnership with professional guy in odometer correction ready with all needed tools up to date?
please send me offers in pm.

Regards.

[PremierD]

Mate this is not the Job centre sorry..........

[tachonow]

Hi mates,
who needs a patnership with professional guy in odometer correction ready with all needed tools up to date?
please send me offers in pm.

Regards.
What means professional ? Having some tools ? How about repairing the damaged after correction ?

[matarelec]

Thanks tachonow for replay.
a professional in odometer correction means that the one who is able to do all the odometer correction for all cars up to date even those cars who are not supported yet by a very professional tools just like enigma tool or diag prog or what so ever.then when odometer correction is done by the right way nothing should be damaged.
Anyway if you have a problem like that just please just drop it on this forum so i would hope i can help.

[tachonow]

Thanks tachonow for replay.
a professional in odometer correction means that the one who is able to do all the odometer correction for all cars up to date even those cars who are not supported yet by a very professional tools just like enigma tool or diag prog or what so ever.then when odometer correction is done by the right way nothing should be damaged.
Anyway if you have a problem like that just please just drop it on this forum so i would hope i can help.

So this partnership, what consist of ?

[dashradio]

If your that good why would you need a partner ?

[boydy1985]

If you pay ?10k up front he'll make you 1k a week! Lol

[matarelec]

It is really a good question from ?dashradio? which needs an answer.
Mate, simply because this business is going so bad where I am living ,why ? Because here we do not have a lot of new fancy cars, almost 99% of cars here are kia, Hyundai and a lot of Chinese cars so all of you know that these cars almost come with serial eeprom and a lot of new guys here now are doing these cars for a max of 20$ and I feel I am wasting my time over her waiting for a few, new cars to do.
This is the reason why I made this offer. I want to move where there I can do the job I love and earn living. Am I that bad or wrong by doing that?
This offer is not for guys who are already professionals, simply it is for guys who are new in this business and maybe do not have the enough experience or tools to do this job.
Thanks for understanding and support.
Regards.

[smirnoff_rules]

Wot country r u from ? Not sure about partnership l think u might be lucky and get a job somewhere


l see from ip your from SYRIAN ARAB REPUBLIC best of luck

[matarelec]

For guys who are interested, please pm me,thanks

[raf0468]

dont know how to put this one mate but the truth sometimes hurt ...but if we are helping all new people coming into the trade by holding their hand and showing them the ropes.. then what do you expect.. they will be doing jobs for $20 because they have a very small layout for the job............and the people already in the trade with big layouts and expensive updates are going to be out of work....



Hi im having some problems with a 2006 skoda octivia. Im trying to adjust the mileage but it isint doing anything. Im useing a tacho univerisal. I first tryed doing it through the obd port and it will find the speedo and give the current mileage but when i try to change it says ok and my screen on the unit goes blank and stays like that until i unplug it. I also removed the speedo and it has a 24c32 eeprom inside so i removed it from the board and cliped it. When im reading it the display on my unit say KM error and reads the current mileage as 000000. Has any body any ideas to what it could be thanks.


please online with me and i will tell you what to do.
messenger:
matarelec@yahoo.com

just a small example...........

please dont get me wrong ,i dont mind helping people who are allready in the trade , and from time to time i need it too....



Today i was doing a job for a car trader and his friend walked in and asked a price on range rover sport ?120 i told him thats the going rate round my end, he burst out laughing ive had it done ?40 , 20k motor how do you think i felt...

and i know who done it so he was not bluffing....

and then we moan to say no work..............

[smirnoff_rules]

This is the problem with most trades to many looking for the same work , most countries r on the arses so the prices drop and drop

[matarelec]

Dear mate?raf0468?
I do appreciate your but please I want you to remember that there are a lot of new cars which really need a very professional tools and we would not be able to help a new guy if he does not have these tools. Also a new guy in this business may have not enough money to buy such a professional and expensive tools, that is away from mentioning the experience which is very important. I do not mind helping everybody but I need to run some good business and earn living at the same time.
I am expecting someone, somewhere where this trade is good yet he does not have the enough experience or tools to run this business so we may become partners and we both get benefit of this partnership.
Regards.

[z786]

@raf

mate i knw jus how you feel

theres 2 lads that own an mot station round here, they do mileages for 20 quid!!!!!!!!!!!

i charge vag micronas 150-200, they charge 50

me being short temperd jus try my best 2 ignore em, but come on how bad does it hav 2 get

[raf0468]

Dear mate?raf0468?
I do appreciate your but please I want you to remember that there are a lot of new cars which really need a very professional tools and we would not be able to help a new guy if he does not have these tools. Also a new guy in this business may have not enough money to buy such a professional and expensive tools, that is away from mentioning the experience which is very important. I do not mind helping everybody but I need to run some good business and earn living at the same time.
I am expecting someone, somewhere where this trade is good yet he does not have the enough experience or tools to run this business so we may become partners and we both get benefit of this partnership.
Regards.


only handful of cars which are not do-able at the moment the rest most can be done with any quality tool....
i cant see why you so sympathetic towards new guy no money no tools but wants to do the job........fist you need to help yourself and then others.....
dont get me wrong i have living to make, and dont have much money.. and mouths to feed........

mate if you have invested over 15 -20k in tools and still spending and learning, learnt the hardway paid 1000,s in cock ups to fix i wouldnt be giving away for free.........