PDA

View Full Version : BDM100 clone from China (files and update)



carsolution
9th July, 2010, 01:07 AM
Hi guys.
Like promissed to some good DK members I am arriving from the garage just now to share with you the files of BDM100 clone from China (grey box).
I am going to post here the Atmel dump and the 68HC11E9 all memory read.
Attached will also have the software to update the hardware just by flashing the device with it connected to power supply and USB, very simple to do just follow the instructions.
24177
24178
24179
Well it is all here and the archives are not password protected.
If someone test this in original one and the conversion to free one is ok, please post it here and share the experience with the rest of the forum.
I am going to bed now or else one day I can find another one there :)
Enjoy it and test it.
Regards,
Nuno

carsolution
10th July, 2010, 02:49 PM
Any results?
Anyone already tested?
Regards,
Nuno

MOBILTRONIC
10th July, 2010, 10:29 PM
1255C_DoitYourselfDiagnostics.rar have virus,Trojan.Regard.

carsolution
11th July, 2010, 03:19 AM
It has a crack inside.
It is normal the antivirus detect him, but if you use antivirus we will not be able to use almost all the cracked software.

maximus1980
12th July, 2010, 05:24 PM
Hi there

My BDM100 must be unrepairable, the 1.exe and 2.exe will not work cannot find device.

Cheers

polat
14th July, 2010, 07:04 AM
Hİ BDM 100 DO YOU HELP ME PLS
GREY BOX PROBLEM

CMD ? Technologies srl - MPCProg

Ver. 3.1.0.1255 Dongle ID: 192 Date: 14.07.2010 09:02:32
Interface Comunication Error
+12Vcc power error or Communication error

janklasseen
27th July, 2010, 06:15 PM
i am having same problem, interface not found, has any1 succesfully corrected the problem?

cosmin12345
27th July, 2010, 11:08 PM
Hi guys.
Like promissed to some good DK members I am arriving from the garage just now to share with you the files of BDM100 clone from China (grey box).
I am going to post here the Atmel dump and the 68HC11E9 all memory read.
Attached will also have the software to update the hardware just by flashing the device with it connected to power supply and USB, very simple to do just follow the instructions.
24177
24178
24179
Well it is all here and the archives are not password protected.
If someone test this in original one and the conversion to free one is ok, please post it here and share the experience with the rest of the forum.
I am going to bed now or else one day I can find another one there :)
Enjoy it and test it.
Regards,
Nuno

hy ,can you tell me please what prorammer do u use to read and write all memory off 68hc11e9 ???

thanks

cosmind
10th August, 2010, 01:15 PM
I have cmd can flasher 1251 and I want to update to 1255.
when I run 2.exe I get error opening device. can you help me, please?
Also, I need the ept file for 1251 or 1255.

thanks

zonerule
15th September, 2010, 07:06 PM
31685


try this

cosmind
15th September, 2010, 10:49 PM
thank you. now must to test the cable on car

luco7
19th September, 2010, 11:10 PM
Search on the file .brd or lay
Thank you in advance

alikrb
16th December, 2010, 01:17 PM
Hi guys.
Like promissed to some good DK members I am arriving from the garage just now to share with you the files of BDM100 clone from China (grey box).
I am going to post here the Atmel dump and the 68HC11E9 all memory read.
Attached will also have the software to update the hardware just by flashing the device with it connected to power supply and USB, very simple to do just follow the instructions.
24177
24178
24179
Well it is all here and the archives are not password protected.
If someone test this in original one and the conversion to free one is ok, please post it here and share the experience with the rest of the forum.
I am going to bed now or else one day I can find another one there :)
Enjoy it and test it.
Regards,
Nuno
Can I use hc711e9 instead of hc11e9???

cipijoint
28th June, 2011, 11:58 PM
for me worked. updated the 1251 to v1255

znoki
20th September, 2011, 04:32 AM
I also can update my 1251 to 1255.
BUT WHAT IS THE DIFFERENT BETWEEN 1251 AND 55???
It's write "Testing" instead "Verifying" :-)

grinovsky
29th September, 2011, 06:56 PM
hy ,can you tell me please what prorammer do u use to read and write all memory off 68hc11e9 ???

thanks
you can use xprogm to read all flash(but you can't write)
start adress:0000
size:10000
i read eeprom of 68hc11e9 of my bdm100 clone that work fine before and after update