PDA

View Full Version : MB E-class 220 CDI (W210) EGR help



pawliukazz
11th July, 2010, 04:44 PM
Hi guys,

The car: Year 2000, MB E-class, E220, CDI, W210, Automatic gearbox

So i have a little problem :)

My MB started to throw black smoke from exhaust pipe. I discovered that the EGR is faulty and i tried to mechanically removed it, but the power is gone then. So i thought that somewhere here is the genius who can help me :) i read that EGR can be disabled from flash ecu, so i attached it here :)

Also if you could make a tuned file that would be awesome too :)

I'm using galletto 1260 if that makes any difference :)

Any help will be appreciated :)

Thanks in advance

gabi_d
13th July, 2010, 08:17 AM
instal ecm2001 in your comp and open that file in prog, first select driver, find phase of injection mapp and fill al to 176 value or hi to 183 i dont know exact, but must work!

pawliukazz
13th July, 2010, 08:24 AM
instal ecm2001 in your comp and open that file in prog, first select driver, find phase of injection mapp and fill al to 176 value or hi to 183 i dont know exact, but must work!

Thakn you, will keep updated if it works or not :)

gabi_d
13th July, 2010, 08:49 AM
i have a mb E200 cdi 2001 2,2l 116 hp and i disable egr but i dont see any diference in exhause smoke!! posibil you have probl in air admision like some litle claps and motor for claps is under plastic admision. sory my english is so poor!

pawliukazz
13th July, 2010, 09:22 AM
I think i know what you are talking abaout and i removed them so my problem is definitely egr since i unplug egr there's no smoke...

I downloaded that program you told me, and i don't know how to use it at all.... Tried since you wrote me and no luck in uderstanding....

gabi_d
13th July, 2010, 11:21 AM
yes no smoke but no power! motor is limited to 3000rpm! open prog, select corect driver, select your mb file, find up in ecm prog ,, injection,, after ,, phase of injection,, open, and modify all value to 176 or hi. or better find in youtube, ecm2001 is a video in spanish lang but you understand in picture, ok!

pawliukazz
13th July, 2010, 12:37 PM
yes no smoke but no power! motor is limited to 3000rpm! open prog, select corect driver, select your mb file, find up in ecm prog ,, injection,, after ,, phase of injection,, open, and modify all value to 176 or hi. or better find in youtube, ecm2001 is a video in spanish lang but you understand in picture, ok!
Yes m8, exactly 3000, so that's why i need to reprogram my ecu to disable egr :) Thanks for your help, i will keep on trying :)

gabi_d
13th July, 2010, 02:14 PM
pawliukazz, you are from?

gabi_d
13th July, 2010, 03:04 PM
hier you have a example of your ecu modif, EGR OFF, Torque limiter, and turbo is modif, if you want to modifi more, modif in injection, rail presure, etc! but not exagerate is to dangerous!!

upload this file in your car and tell how work?

pawliukazz
13th July, 2010, 04:32 PM
Thanks m8, you are a lifesaver!!! You won't be forgotten! I'm from Lithuania :)

pawliukazz
13th July, 2010, 10:20 PM
Just posting back that it works great! Thanks again m8 :)

EugeJK
14th July, 2010, 03:57 AM
very interesting... always wanted to disable egr!

gabi_d
14th July, 2010, 08:05 AM
pawliukazz, am glad for you.

greeting from romania!!!

and tell, no more smoke? you feel more power?

pawliukazz
14th July, 2010, 09:18 AM
pawliukazz, am glad for you.

greeting from romania!!!

and tell, no more smoke? you feel more power?
Yes, no more smoke and more power!

Well greetings from Lithuania ;)

coolis
15th July, 2010, 01:50 PM
Red=EGR OFF..
Green= Egr works normally..

Nicowico
15th July, 2010, 06:50 PM
GABI_D can you also make EGR off for Peugeot 2.2 HDI EDC15C2 ecu?

gabi_d
15th July, 2010, 07:40 PM
nicowico, if you can read ecu dump is not so hard! open ecm2001, select corect driver, select your file and go to injections - phase of injection in ecm2001 is EGR, like in picture from coolins is reprezent in 3d grafic, put all value to hi and all is done! of course you can open your file in winols and make modify, but winols is for real profi. need more time for study how to work etc.

gabi_d
15th July, 2010, 07:47 PM
any way if you have dump from ecu post hier ori file. what you expect to this modify? EGR off.

Nicowico
15th July, 2010, 10:58 PM
OK, here it is,

gabi_d
16th July, 2010, 08:17 AM
what model of peugeot? 406 2.2 hdi?

gabi_d
16th July, 2010, 08:34 AM
hier is file mod whit EGR off.

Nicowico
16th July, 2010, 07:07 PM
file is corrupted.

pawliukazz
16th July, 2010, 07:16 PM
file is corrupted.

No. It just needs to be renamed ftom ".mod" to ".bin" I just did it for you ;)

Nicowico
16th July, 2010, 07:32 PM
It's a complete other file than I uploaded

pawliukazz
16th July, 2010, 09:29 PM
It's a complete other file than I uploaded
No m8, this is a good file. It suppose to have more differs than few bytes, it's ok. I mean it's not a few bytes which you can disable but you have to rewrite all ecu's program.

Nicowico
16th July, 2010, 10:42 PM
This is my file:
FILE: Fap removed
Bytes: 7FFFF
Checksum: 417C
Marca: Bosch
Num. HW: 0281010773
Num. SW: 1037353575

and this is the other file:
FILE: nicowico egr off.rar
Bytes: 286B0
Checksum: C43C
Marca: GM DELCO
Num. HW: 19N?)?Z??+ ?
Num. SW: D9?_"?Z????`

It's a General Motors file.

pawliukazz
17th July, 2010, 06:25 AM
This is my file:
FILE: Fap removed
Bytes: 7FFFF
Checksum: 417C
Marca: Bosch
Num. HW: 0281010773
Num. SW: 1037353575

and this is the other file:
FILE: nicowico egr off.rar
Bytes: 286B0
Checksum: C43C
Marca: GM DELCO
Num. HW: 19N?)?Zš?+ ?
Num. SW: D9?_"?Z????`

It's a General Motors file.
I'm saying to you - use file which i renamed! i had the simmi9lar problem because gabi_d uploaded a zip archive which is not good i changed to rar archive now should be ok! trust me, the file is good you just extraxt it not correctly :)

YOU FIRSTLY HAVE TO EXTRAXT the bin file out of the archive! only then you can use it normally! if you don't know how to do it - use google and find WinRar :)

gabi_d
17th July, 2010, 08:53 AM
nicowico, sory for problem, but i dont find any error in file! you must to extract file, unpack file from zip or rar in mod or bin or unnamed! you have galletto or kwp2000? in any case you can upload file unnamed, bin or mod, etc.

Nicowico
17th July, 2010, 12:33 PM
Ok, you were both right. My mistake. Sorry.

But..... It does not work. Got a polution fault right after I started the car and the car went in limp mode.
Reflashed with the ori file. Pitty.

vwpassat
20th July, 2010, 01:13 PM
Hi Sir
Would you cut off EGR for me please? Can you do this?
It is a Mercedes C200 CDI
Thank you very much.

nicowico, sory for problem, but i dont find any error in file! you must to extract file, unpack file from zip or rar in mod or bin or unnamed! you have galletto or kwp2000? in any case you can upload file unnamed, bin or mod, etc.

redline140
20th July, 2010, 07:58 PM
Hi Sir
Would you cut off EGR for me please? Can you do this?
It is a Mercedes C200 CDI
Thank you very much.


Here you have.

Just EGR OFF, nothing more.

:musicus:

VR4STEFANOS
27th July, 2010, 10:09 AM
MI FREAND GABI_D DO YOU HAVE A DRIRIVER FOR ECM 6.3 THAT CAN OPEN MERCEDES W210 220CDI MAP FOR ME ? IF YES HOW CAN I GET IT?
THANKS

pawliukazz
27th July, 2010, 11:59 AM
MI FREAND GABI_D DO YOU HAVE A DRIRIVER FOR ECM 6.3 THAT CAN OPEN MERCEDES W210 220CDI MAP FOR ME ? IF YES HOW CAN I GET IT?
THANKS
M8, use search button, you will be amased what it can do, the drivers are already uploaded here...

vwpassat
27th July, 2010, 09:06 PM
Thank you very much, I appreciate you.

Here you have.

Just EGR OFF, nothing more.

:musicus:

VR4STEFANOS
29th July, 2010, 09:37 AM
M8, use search button, you will be amased what it can do, the drivers are already uploaded here...
I HAVE DOWNLOADED DRIVERS BUT THE MERCEDES DRIVERS ARE GIVING AN ERROR MASSAGE WHEN YOU TRY TO LOAD THEM
THANKS FOR THE HELP

paraver
15th January, 2011, 08:49 PM
Hi guys,

The car: Year 2000, MB E-class, E220, CDI, W210, Automatic gearbox

So i have a little problem :)

My MB started to throw black smoke from exhaust pipe. I discovered that the EGR is faulty and i tried to mechanically removed it, but the power is gone then. So i thought that somewhere here is the genius who can help me :) i read that EGR can be disabled from flash ecu, so i attached it here :)

Also if you could make a tuned file that would be awesome too :)

I'm using galletto 1260 if that makes any difference :)

Any help will be appreciated :)

Thanks in advance



Hello to everyone,

I have exactly the same problem, can anyone help me with my dump?

Thanks in advance

coolis
16th January, 2011, 09:36 AM
Hello to everyone,

I have exactly the same problem, can anyone help me with my dump?

Thanks in advance

Just egr off, not tuned..

paraver
16th January, 2011, 02:03 PM
Just egr off, not tuned..


Many thanks,
P

supersamy
6th February, 2011, 07:49 PM
changed place

bold36
17th October, 2011, 12:39 PM
MB 210 E220 edc15c6 2001year
please help EGR OFF

coolis
17th October, 2011, 07:19 PM
MB 210 E220 edc15c6 2001year
please help EGR OFF

Egr off nothing else..
Pass PM

dieseltechnika
28th August, 2012, 12:34 PM
it is not EGR off but only close it. There is a switch off function which I am looking for.

bugajewski_pl
1st July, 2014, 11:46 AM
Same problem :-) My private W210 E200CDI, i need to disable egr. Can someone help me ?

Fec001
1st July, 2014, 02:59 PM
Same problem :-) My private W210 E200CDI, i need to disable egr. Can someone help me ?

Here is your file!!!
Test and report.

bugajewski_pl
1st July, 2014, 04:02 PM
Here is your file!!!
Test and report.

The starter does not turn, also on dash i don't have glow-plug indicator.

Fec001
1st July, 2014, 06:25 PM
What tool did you use?

bugajewski_pl
1st July, 2014, 06:40 PM
galetto 1260

Fec001
1st July, 2014, 06:52 PM
did you try write back ori file?

bugajewski_pl
1st July, 2014, 08:08 PM
yes, without problem, on ori file car works fine.
I'll check tomorrow errors in the engine on your file.