PDA

View Full Version : Help!! RNS MFD2


fantasy156
12th July, 2010, 09:52 AM
Mi potreste aiutare a trovare il codice di questa autoradio? o come fare a sbloccarla?

VWZ1ZE5074859


thanks
deffc0n
12th July, 2010, 12:29 PM
Read FIS and dump :)
fantasy156
12th July, 2010, 12:50 PM
Read FIS and dump :)

the eprom is 95320, i can read like a 24cXX?

Tancks
PremierD
12th July, 2010, 12:54 PM
the eprom is 95320, i can read like a 24cXX?

Tancks




Eh! no mate you cannot .. 95xxx 25xxx ... not 24xxx
fantasy156
12th July, 2010, 01:06 PM
Eh! no mate you cannot .. 95xxx 25xxx ... not 24xxx

I use willem pcb45, imposed M95320?
sorry but for me the first time..

tanchs
fantasy156
12th July, 2010, 01:42 PM
I read the eprom!!!

VWZ1Z7E5074859
Blaupunkt gmbh
7 612 002 029
bno 881

TANCKS
fantasy156
12th July, 2010, 09:08 PM
Help please!!!!
siti
12th July, 2010, 09:23 PM
Help please!!!!

code stored in FIS not in eprom 95320
fantasy156
12th July, 2010, 10:19 PM
I do not know where to find it, sorry but I'm a newbie .....

thanks
fantasy156
13th July, 2010, 09:18 AM
I found the pattern, what do I connect to the pins "I2C"?
cosmin2004ro
13th July, 2010, 09:50 AM
you just have to connect sda scl and gnd and read it like 24c32
fantasy156
13th July, 2010, 02:31 PM
I followed the instructions, but a strange thing happens, I read 24c32 but there's nothing like sefosse empty inside, I panic unplug everything and turn on the radio the result is that the car will not turn anymore. ... What happened and now I can do??
fantasy156
13th July, 2010, 09:41 PM
I can not understand what happened, I'm in trouble, maybe has some sort of protection? help me please ....
Thanks for your patience
cosmin2004ro
14th July, 2010, 08:05 PM
just remove the unit from car for the first thing
fantasy156
15th July, 2010, 01:41 PM
The work I did was this:
1 - take off the car radio
2 - Solder the wires on the card as shown in the diagram is grounded to the programmer
3 - food Programmer
4 - feed your car stereo
5 - I try to read the FIS, but I find an empty file
siti
15th July, 2010, 02:30 PM
The work I did was this:
1 - take off the car radio
2 - Solder the wires on the card as shown in the diagram is grounded to the programmer
3 - food Programmer
4 - feed your car stereo
5 - I try to read the FIS, but I find an empty file

try to radio power on, +12v
fantasy156
15th July, 2010, 02:39 PM
Yes!! I fueled the car at 12v
siti
15th July, 2010, 03:05 PM
remove radio of car & try this
fantasy156
15th July, 2010, 03:18 PM
ok! I'll let you know, I started
prusony
15th July, 2010, 07:04 PM
After connecting power to NAVI, and before reading FIS need pause 30...40 seconds !!!!!
fantasy156
16th July, 2010, 06:49 PM
as in what? I press a button? thanks
cosmin2004ro
16th July, 2010, 07:32 PM
after you power the radio you have to wait about 40 50 seconds then you put the socket into programmer and try to read fis as 24c32
a good sign to know that wat you read is ok you lock at lin 20 40 and 60 and they have to mach
branco
16th July, 2010, 08:27 PM
best thing you can do is to go straight to your local decoder
regards
fantasy156
17th July, 2010, 03:42 PM
how do I report the car testing thanks
fantasy156
1st August, 2010, 09:21 AM
The radio I did not have more scope, thanks to everyone for the help
fantasy156
24th April, 2011, 07:54 PM
Hello, I'm back here for a similar problem, let me explain:
mdf2 having to decode the radio, I link my willem posted by using the pattern "SITES" I read the file, open it and compare it with the original one posted by others, I realize that is not the same so I decided to reread but not connect longer light after several attempts I can start it but when I take off the power again the same problem, I have a seprate problem because the clock radio it can only start with the willem programmer connected, in most can not even to write ..... Who can give me a hand??
excuse my language ..... thanks