MB c-klasse 3bar map??

[coolis]

Hello,
Can anyone help me?
I want to change 3bar map sensor to my dump.
Now there is 2.5bar map sensor and i need moore boost.
I have bigger turbo gt23v and amg nozzle thats why i need moore boost.
I can?t find "boost" map linearisation in my dump


edit

[rsibiza]

Hello,
Can anyone help me?
I want to change 3bar map my dump.
Now there is 2.5bar map and i need moore boost.
I have bigger turbo gt23v and amg nozzle thats why i need moore boost.
I can?t find "boost" map linearisation in my dump


Are you sure you want 3BAR? ergo 2 bar pure pressure...do you have watermist injection? or bigger high flow intercooler?

[coolis]

Are you sure you want 3BAR? ergo 2 bar pure pressure...do you have watermist injection? or bigger high flow intercooler?

yep, I need 1.8bar, now i have only 1.5 and smoke very well..
I have also bigger cooler, now i have about 240hp and 550nm

[rsibiza]

yep, I need 1.8bar, now i have only 1.5 and smoke very well..
I have also bigger cooler, now i have about 240hp and 550nm

Ok..1.8 is not 2.0...theres a lot of space between.

Please post what model? Year?ccm? Hp(ori)

what edit soft do you use?

So i will post a picture of how to do,and if also needet to raise turbo boost limiter,some edc15 ecu s have limiter,and if you dont raise it,so you go in safe mode once limiter pressure is arrived:(

[gabi_d]

coolis, that file is tuned or is ori file? if is tuned what do you modify in dump?

[coolis]

coolis, that file is tuned or is ori file? if is tuned what do you modify in dump?

File is ori. I use winols modify dump.
Car is MB C 220 cdi 2003 and 143hp, Ecu is edc15c6

I now there is also temp/boost map, max boost limitter what i have to modify..

I also lookin max fuel limitter, i think that is about now 90mm/stroke.

[gabi_d]

coolins, you know well in winols!!! winols is very complicated for beginners, you need to memorize to many elements to know how show all mapps what you need, and most important to know how engine work in detail all phases. i think is for profi tuners.

[coolis]

coolins, you know well in winols!!! winols is very complicated for beginners, you need to memorize to many elements to know how show all mapps what you need, and most important to know how engine work in detail all phases. i think is for profi tuners.

3 years ago when i tryed to get some edit soft only what i found was winols.

Now i loaded ECM and maybe that is good edit soft for beginners, but you dont understand anything what you are really doing...
Maps have wrong names and axis, if you try to do good stuff then you have to use different edit sotfware..

But still my problem, someone tell me how i change 3bar map sensor on my dump??? I have new datasheet 3bar map sensor, but i dont find sensor linearisation map

[BubbaFet]

Ok..1.8 is not 2.0...theres a lot of space between.

Yes there is, but running 1.5bar with a 2.5bar sensor leaves no room for detecting overboost..

1.8 on a 3bar is just perfect.

[coolis]

Problem is solved..