Help with Citroen Xsara Mileage

[marcolr]

Hello, I'm trying to change the Mileage of a Xsara HDI. BSI and Dash has micro NEC.
The procedure to follow is to change the BSI to 00000 km and Dash to Km I want.
After install the BSI first and then the Dash, and I always appear km from the BSI, ie 000000.
With the software I have I can only put the BSI to 00000 km but not the Km that I want.
Anyone can change the dump of the BSI to Km desired?
I uploaded the files that I have, 277645 are original and 148645 and 00000 are modified by me.
Please say me if the procedure that I make is Ok and the files modified are Ok.
And please change mileage for me, I need 148645Km.
Thanks

[diga1]

these are not good dumps there are all ffffff
that is maybe why there is zero on cluster

[marcolr]

these are not good dumps there are all ffffff
that is maybe why there is zero on cluster

No, the eeprom zone is

BSI

MCU type: uPD 780949
EEPROM: $0F900-$0F9FF


Dash

Vehicle: Citroen Xsara 2000 year
MCU type: uPD 780973
EEPROM: $0F900-$0F9FF

Look this zone of memory and you can see the eeprom data

Anyway I upload the same files but cut only with the eeprom


Thanks

[marcolr]

Can somebody help me with this Xsara?? Please

[wokounek]

try this bro Wok.

[marcolr]

try this bro Wok.


Ok, I'll try these files.
Can you tell me the procedure to mount the BSI and the dash?
First install the BSI and then the dash? or vice versa.
I have to wait some time or should mark the Km correct at time?
Thanks

[wokounek]

1.BSI
2.Dash
3.switch ignition

[marcolr]

1.BSI
2.Dash
3.switch ignition

Thanks! Now it has worked perfect. But I don?t understand where the problem was with my modified files.
I was comparing yours with mine and I think the problem was with the BSI because the dash is the same change in yours than mine with the difference that I put 148633Km and you 148645Km but anyway to install the dash marked 148656km.
The instructions in my software programmer tells me to put on the BSI 0Km I have to Fill address: $ 0F9C3 - $ 0F9FF with "00"
but this way I always marked the dash 0Km.
One more thing, I need to modify something more that dash and BSI?
I read somewhere that citroen and peugeot kept the Km in the ABS and ECU. I have to change something there? and just with the dash and bsi is enough?
Thank you very much mate.

[wokounek]

if your car is diesel and has bosch - edc 15 or 16 - engine ecu there are km stored inside eeprom for edc 15 95P08 and for edc 16 95160, 95320 or 95640. for all PSA cars there is service history inside diesel and petrol engine ecu if you have lexia diag tool you can see it. wht kind of programmer do you use for calc km?

[marcolr]

I have Tacho Pro Universal 2008, BMW CAS3 Programmer, BMW M35080 Programmer, NEC Dashboard Programmer, Vag K+CAN 2.5 and UPA programmer.
For this Xsara I use this NEC Dashboard Programmer
http://www.oasfactory.com/uploadfile/content/2009082214132065.jpg

and this software

P.D. One more thing, You know if I can program EWS of BMW with UPA programmer and how? I have the BMW Key reader that came with the Tacho Pro Universal but I don?t get it to work.
Thank you very much

[wokounek]

wht kind of bmw ews do you mean - 3.x or 4.x? send me maskset from mcu

[marcolr]

wht kind of bmw ews do you mean - 3.x or 4.x? send me maskset from mcu
Hello, sorry for not answering before, but I was away from home 1 month and did not have the EWS to tell you if it was 3.x or 4.x
I returned last week and have taken off the EWS. It is a 3.x I think.
The MCU masket is:
EWS3_SW08
PM-FT
XC93222CFN
0D46J
NMQQWM0238
03/03

Regards

[mohamed12345678]

good file ........