PLZ HELP For Reading 1L59W Mask with XROG-M

[Saman]

Hi All Freinds , I want to Read Opel Astra 2008 CIM MCU Mask 1L59W which is Motorolla FreeScale MC9S12DT128 112 Pin LQFP , I connected Like this Table

pin 23 = BKGD
pin 40 = Ground or GND
pin 41 = VDD = 5V
pin 42 = RESET

When I Read ( Bootloader Intialisaing error ,Can't to access BDM Chek BDM Connection ) plz anyone did read this mask ? I need your help.

[Dunker]

I have the same problem with the same CIM. I have tried everything I can think of. I've also tried to read as secured with the adapter and still fails. Today I might have found a transit connect dash that has similar MCU. I'll try to read this weekend. There must be something simple we are missing.

[Dunker]

I've had a look at the Transit Connect dash I have and unfortuneately its the older type. Can anyone offer suggestions as to what else has a 9S12 MCU so I can see if my clone works with these. Cheers.

[Dunker]

I had another Connect in today. The dashboard 9S12H256 read perfectly. The CIM on the Vauxhall/Opel must need a pin lifting somewhere. I've removed the 9S12 from my CIM and I still must be missing something. The 1L59W is listed on the software so it must be us :(