PDA

View Full Version : ROVER 400 DI immo off



totalfree
20th July, 2010, 08:40 PM
Rover 400 2.0 Di 1998
0281001418
msb 100491 type 4108

Please immo off

prusony
21st October, 2010, 05:55 PM
HI M8 i have the same problem - radio-remout damaged , and need to kill immo please .......

max 322
21st October, 2010, 06:50 PM
Here is the brother off

prusony
21st October, 2010, 06:54 PM
Here is the brother off
This variant does not work, i try..... tnx

max 322
21st October, 2010, 06:59 PM
Test and you will see brother

niki85
21st October, 2010, 07:00 PM
Hi guy`s

that is the most simplets ecu for immo off and if you want recode
ecu is MSA11
you can do immo off on this way:
take off ecu from car
switch the places of eproms
put back on the car
give ignition for 50sec
turn off ignition
get off ecu again
get back eproms in original places
take immobox out from car and put in trash
get ecu in to car and car works without code


regards

niki85
21st October, 2010, 07:01 PM
max232 send you file for petrol engine 1600ccm
and that engine do not have MSA11 ecu
so that fail do not work with diesel

prusony
21st October, 2010, 07:26 PM
Hi guy`s

that is the most simplets ecu for immo off and if you want recode
ecu is MSA11
you can do immo off on this way:
take off ecu from car
switch the places of eproms
put back on the car
give ignition for 50sec
turn off ignition
get off ecu again
get back eproms in original places
take immobox out from car and put in trash
get ecu in to car and car works without code


regards
Thanks niki85 for reply, i seen this solution, but doubt.....
sorry for question - plz tell me = you are really doing it ??

max 322
21st October, 2010, 07:31 PM
BOSCH MSA11
UNIT INSTALLED
ON TURBO DIESEL CAR
GROUP
FIAT-OPEL-ROVER-Landrove
ER-HONDA-BMW
Please note that RESET IMMOBILIZER
TOTAL AND PARTIAL
PROCEDURE


RESET PROCEDURE
KEY-CODE
DIRECTLY ON CAR
REVERSE THE EPROM A1-A2,
TURN THE SWITCH
Switch the ignition
ON FOR ABOUT 50 sec.
BACK IN THE EPROM
Original position and
CHECK THE RESULTS
RESET TO COUNTER
16-17 PIN POWER SUPPLY
BATTERY +
18-19 PIN POWER SUPPLY
BATTERY -

niki85
21st October, 2010, 07:37 PM
Prusony
i do that procedure on omega b 2.5tds and bmw 525tds
but that is the same ecu and this solution work perfect

max 322
21st October, 2010, 07:51 PM
That brother and tell me

cfgebel
4th December, 2010, 02:06 AM
prusony are the car star
max322 dump or niki85 method

deadliner
9th October, 2012, 11:16 AM
max322 method is working perfect

peko
9th April, 2013, 06:30 PM
anybody have tested successfull ? i have same trouble