View Full Version : Vito start error
rsilva
21st July, 2010, 12:53 AM
Hi all,
I have an ecu and EWS from a mercedes vito 2.2 CDI. It shows "Start Error" on dashboard and it doesn't start.
Can anyone please check if ecu and ews are syncronized. If not please help syncro again. Thanks for any help.
info from ecu:
REF: A0001535979
CR1.7 2.2L 4ZYL MQ3+MS3
EEPROM: 24C04
info from ews:
031 545 59 32
mcu:hc08az32
Best regards
Rsilva
d.zio
21st July, 2010, 01:11 AM
i can help you but i dont know how to upload my clear bins to you here....can you help me??
d.zio
21st July, 2010, 01:15 AM
ecu clear.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=25467&stc=1&d=1279671307)
d.zio
21st July, 2010, 01:17 AM
hc08 clear.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=25471&stc=1&d=1279671493)
d.zio
21st July, 2010, 01:21 AM
ok....i found this....try first only with the hco8 clear and if the car dont start then programm the ecu with ecu clear.....
rsilva
21st July, 2010, 01:38 AM
Hi
thanks for help me so quickly. I will try files tomorrow and give you feedback.
Thanks and best regards
Rsilva
vanos batam
21st July, 2010, 03:47 AM
Hi all,
I have an ecu and EWS from a mercedes vito 2.2 CDI. It shows "Start Error" on dashboard and it doesn't start.
Can anyone please check if ecu and ews are syncronized. If not please help syncro again. Thanks for any help.
info from ecu:
REF: A0001535979
CR1.7 2.2L 4ZYL MQ3+MS3
EEPROM: 24C04
info from ews:
031 545 59 32
mcu:hc08az32
Best regards
Rsilva
hi your file here
rsilva
21st July, 2010, 08:39 AM
Hi vanos,
sorry, but no files :(
Regards
djdansmart
21st July, 2010, 08:49 AM
Try this repaired dumps..good luck!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.