PDA

View Full Version : Fiat Scudo (Peugeot Expert, Citroen Jumpy) 2009-2010y. BSI dump need.



2shaman
21st July, 2010, 09:37 AM
Hi. Need dump from BSI to compare. I think dump from my BSI coruppted.

r6eck
21st July, 2010, 04:52 PM
hope this helps you

2shaman
21st July, 2010, 05:35 PM
hope this helps you
Thank you, r6eck, but your dump from BSI made by Valeo, But I have BSI Johnsons Control.
Bouth of them have EEPROM 95128 but contain different data.

immyrs200
24th July, 2010, 11:25 PM
Buy new 95128 and solder into bsi. take the car to fiat and get them to re-code everything in.. Or use suitable disgnostic equipment and re-code everything in yourself>>

regards

TULGEYWOODMAN
28th July, 2010, 02:30 PM
immyrs
I also use enigma, but it didnt like the bsi on the scudo I did![valeo 95128]

What is the best solution?
I see you advised putting new eeprom on bsi and sending to Fiat.
Do i not need to virginise bsi dump?

Will a completely blank dump be ok for fiat to repair it?

thanks in anticipation
ps
Will planet do a scudo ok? [dont have it, but will buy it for this job]

looly
28th July, 2010, 03:44 PM
immyrs
I also use enigma, but it didnt like the bsi on the scudo I did![valeo 95128]

What is the best solution?
I see you advised putting new eeprom on bsi and sending to Fiat.
Do i not need to virginise bsi dump?

Will a completely blank dump be ok for fiat to repair it?

thanks in anticipation
ps
Will planet do a scudo ok? [dont have it, but will buy it for this job]

Yes, pp will work on scudo.

BR

TULGEYWOODMAN
28th July, 2010, 05:37 PM
Thanks,
just not sure whether it needs a virgin dump in it or a blank dump as the previous poster suggested.
Can anyone clarify this please?
Also if virgin dump required, will the c4 virgin dump from otocheck be ok?

looly
29th July, 2010, 01:53 PM
Thanks,
just not sure whether it needs a virgin dump in it or a blank dump as the previous poster suggested.
Can anyone clarify this please?
Also if virgin dump required, will the c4 virgin dump from otocheck be ok?

Not too sure if dealer can do anything with a dump full of ff's apart from replacing the bsi. I tried this with a 307 bsi and was not able to program it. Best thing to do (IMO) is to post your dump on here and hopefully someone will be able to virginize it for you. Then use pp or similar to reprogram.

TULGEYWOODMAN
4th August, 2010, 08:42 AM
2shaman,
Did you solve it?

ticc
5th December, 2010, 03:48 PM
Hola, como leer eprom bsi expert 2007