scrambled starview 6

[murph 1]

can anybody help me i got a starview 6 two days ago downloaded carling 1.00 followed satsmo instructions keep getting scrambled channels any advice please

[fireduck]

hi mate,

try this...

Go to menu then highlight accessory and on the remote press the numbers "8989" (you will not see the key edit unless you have scanned the box first) you will then see "K*yedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.

[murph 1]

done that already but thanks anyway fireduck

[antsumner]

i think this is the latest firmware m8 reflash your box
Digital Kaos - Downloads - Starview 6 Lan (http://www.digital-kaos.co.uk/forums/downloads/starview/23/starview-6-lan-1270/)

[murph 1]

thanks for your advice antsumner loaded the firmware you suggested but cant highlight it to reflash. can anybody tell me if they have a sv6 up and running in my area Romford, Essex

[antsumner]

have you unzipped the folder with winrar?then u will have the ups file mate.

[murph 1]

thanks again for your reply managed to highlight the firmware and reflashed the box still no good i have know accepted defeat its going to be used as a door stop

[tony_i]

thanks again for your reply managed to highlight the firmware and reflashed the box still no good i have know accepted defeat its going to be used as a door stop

That's the spirit. :giveup:

[safc1234]

:slug:
thanks again for your reply managed to highlight the firmware and reflashed the box still no good i have know accepted defeat its going to be used as a door stop


i will give you a tenner 4 it,

[tony_i]

I'll swap you two of my doorstop receivers for your one.

That means you can double your door-stopping capabilties for the price of postage.

[murph 1]

its a deal, but thats a ten quid more than its worth

[tony_i]

If you have...

A broadband connection.
A box that is properly connected to your router by the correct cable. (Are you sure it's not a crossover cable? Is the cable faulty?)
The correct firmware flashed.
A fully operational UK Virgn cable connection. (Can you get BBC1 etc? If you're connected up properly you should get it however the starview server is working. If you can't get it then you're not connected to the cable network.)
You have followed the tutorials properly. (Have you scanned the box for channels before connecting the LAN cable? Is it on Ustream?)

...you will get what you're after.

Good luck.

[interat]

Is the ustreem set, go to networks then set to ustreem if you have done that then the box has a faulty lan, some boxes don't work on the lan as they should, that's all it can be, if its faulty return it, its a common problem, also you have to have a wireless router or a home plug, it wont work direct from the modem only.

Try this go to network IP setup change to auto then apply then re boot several times, worked for me.

[murph 1]

hi Tony, i dont have a cable link from my router to box i have home plugs.I can get BBC ect, and i only connect the LAN after i have scanned

[interat]

can anybody help me i got a starview 6 two days ago downloaded carling 1.00 followed satsmo instructions keep getting scrambled channels any advice please


Did My tip work ? Interat

[murph 1]

sorry about the delay in replying interat, no it didnt work cheers anyway mate