toyota prius mileage heeeeeeeeelp

[josh786]

hello every body, i hope you can help. i have the tacho universal and i need to correct the mileage on my toyota prius 2007. how many memories does it have and whats the procedure. many thnaks:smokin:

[andydz106]

there should be only one memory under the display

[josh786]

which display , there are two displays and whats the procedure

[josh786]

hmmmmmmmmm looks like no one wants to help me

[lupu_sandu]

I think you are to lazy to search.
You have tacho universal who came (im pretty sure) from China.
Check Toyota manual in Dutch folder (this manual came on CD), or search for this manual here.
Use google translate for this:

Benutzen Sie folgende Platine und Klammer
• Bauen Sie das Kombiinstrument aus, Platine komplett herausnehmen.
• Display vorsichtig von der Platine entfernen.
• Suchen Sie den 8poligen Chip 93C46.
• Keinen Quarz br?cken.
• Verbinden Sie die Klammer mit Port 0.
• Setzen Sie die Klammer auf den Chip 93C46 (rot auf Pin 1).
• W?hlen Sie im Tacho Universal Toyota-Prius
• Der Tacho Universal zeigt Ihnen den alten Kilometerstand an.
• W?hlen Sie im Men? KM ?ndern.
• Geben Sie den neuen KM-Stand ein.
• Best?tigen Sie den neuen KM-Stand mit OK

[raf0468]

hmmmmmmmmm looks like no one wants to help me


friend you seem to know how to do a 2009 audi q7 advising others what tools they need, yet you work with clone universal yourself..........

"with enigma it' a plug in so might be same with dp3"

quoted from one of your posts......

yet you have problem with basic eeprom programming car..

search few posts back all problems regarding this car have been posted.....

[josh786]

i saw some one do the q7 so i thought i'd help:banghead:

[tachonow]

If you are new also in this work not only on this forum be care with Prius dash ! You can damage it very easy. Just an advice.

[josh786]

i will have to get someone else to do it as it's too much soldering

[florinyes]

If you're not good at soldering forget it..Too much trouble.

Eeprom under the lcd screen and not easy to do either.

[z786]

If you're not good at soldering forget it..Too much trouble.

Eeprom under the lcd screen and not easy to do either.

did you manage 2 fix the 1 you had??

[florinyes]

Done it, but had to get clocks from a scrapper..Nasty job to do them ones...Mileage is not where everyone though would be..

Ta

[eeddyy23]

If you're not good at soldering forget it..Too much trouble.

Eeprom under the lcd screen and not easy to do either.
they can be done with out taking screen out have done several

[TULGEYWOODMAN]

I thought you wher not supposed to post heeeeeeeeelp?

[diagtech]

And again thats why we all gave big money when we started for back up wish i could have spent ?250 for the kit i begged borrowed and stole to afford at ?7200 and that is why these idiots can do jobs at ?20 and ?25 let them have the paki taxi drivers they are welcome ill stick with the good earners.

[cklair]

they can be done with out taking screen out have done several
would you share the info how do you do it without taking the dashbord apart? if this is not a big secrte.thanks

[tranzavanza]

bro, you can do this one from the back
standard 6 wire toyota connection 5,8,4,3,2,1. no need to bridge oscillator and no magic trick involved.

use upa, digimaster or Enigma.

Not a hard to do.