PDA

View Full Version : audi rns auz1z1x3 code please!!!


zagyboy
23rd July, 2010, 05:39 PM
audi RNS a6 (4B0 035 192 E )

blaupunkt 7 612 001 797

seri no auz1z1x3156289

thanks
deffc0n
23rd July, 2010, 05:43 PM
Read eeprom and send dump.
zagyboy
23rd July, 2010, 05:46 PM
eprom name please ?

exp : 24c32 or 24c16
deffc0n
24th July, 2010, 01:03 PM
This FIS read like 24c32.
If no good try like 24c16.
zagyboy
26th July, 2010, 01:16 PM
This FIS read like 24c32.
If no good try like 24c16.

I find FIS-MODUL in case but how can I read dump ?

Topmax2 or upa ?
zagyboy
31st July, 2010, 07:00 PM
This FIS read like 24c32.
If no good try like 24c16.

Hello..

I am reading 24c16 start :0 end : 7ff ( or 7f8 ) dont read but
start : 0 end :2f then read eprom.

start : 0 end :7ff ack error.please see the picture and say my how can I find code this picture ?

Please say my how can I read 24c16 start :0 end :7ff ?
prusony
31st July, 2010, 07:17 PM
Try enter CODE -= 1123 =-
Car235
31st July, 2010, 07:18 PM
This FIS read like 24c32.
If no good try like 24c16.
(4B0 035 192 E) is 24c16 mate ...
zagyboy
2nd August, 2010, 07:58 AM
Try enter CODE -= 1123 =-

sorry invalid code:(((((((
prusony
2nd August, 2010, 08:16 AM
1123 - code to dump out your pictures ....
I am 100% sure !! :)
look for another problem (maybe "S"con. no connected to plus...)
zagyboy
2nd August, 2010, 08:30 AM
1123 - code to dump out your pictures ....
I am 100% sure !! :)
look for another problem (maybe "S"con. no connected to plus...)

plug +12 and +12 and ground after start enter code invalid code :((

How can I do ?

thanks a lot..
prusony
2nd August, 2010, 08:38 AM
plug +12 and +12 and ground after start enter code invalid code :((

How can I do ?

thanks a lot..
M8 - S-con. necessarily!!!! need connect to +12V !!!
zagyboy
2nd August, 2010, 08:54 AM
M8 - S-con. necessarily!!!! need connect to +12V !!!

S-Kont +12 and Ub +12 finaly ground enter code after invalid:((


safe pin +12v ?

thanks a lot
Budrys86
2nd August, 2010, 09:20 AM
S-cont Ub and SAFE pin must be 12v
zagyboy
2nd August, 2010, 09:49 AM
S-cont Ub and SAFE pin must be 12v

thanks a lot.

S-cont +12 , Ub +12 and safe +12 display safe mode...

I am waiting for enter code..
zagyboy
2nd August, 2010, 10:44 AM
1123 - code to dump out your pictures ....
I am 100% sure !! :)
look for another problem (maybe "S"con. no connected to plus...)

code working thanks a lot....
zagyboy
2nd August, 2010, 10:45 AM
S-cont Ub and SAFE pin must be 12v

ok working.... thanks a lot..