View Full Version : help clear crash 08 nissan altima, 98820 JA100
lwood
26th July, 2010, 09:56 PM
hi guys need help clear crash data. thanks,
08 nissan altima
98820 JA100
RL66=93c66
alexb
27th July, 2010, 08:31 AM
hi guys need help clear crash data. thanks,
08 nissan altima
98820 JA100
RL66=93c66
u should repost the file cuz it dont look rite
lwood
27th July, 2010, 07:21 PM
thanks for the heads up.
i just double check and your right.
here is the correct dump.
Moyshe
27th July, 2010, 07:53 PM
Try this one.
flusher
27th July, 2010, 08:34 PM
pm me i can try to clean it too
lwood
27th July, 2010, 09:00 PM
Try this one.
i will try and report back.
lwood
28th July, 2010, 11:18 PM
Try this one.
work great. light turned off right away. no diog system needed. thanks
uklviv
10th March, 2011, 07:10 AM
Hi, I was just wandering did you have to remove a chip to read/write it ? because I can't erase mine I can only read it.. don't know why. 98820ja100 RL66-93c66
lwood
10th March, 2011, 05:20 PM
ALL programmers are different. i use carprog. i dont have to take off chip.
ctype02
10th March, 2011, 06:22 PM
i use programmer from arlab n i do it on the board and it read n write fine...
crashcar
11th March, 2011, 04:42 AM
Arlab is good tool.Did one 08 Altima onboard with out any problem.
alex1g35
6th June, 2013, 10:26 PM
Hey guys. So i also tried the file by "Moyshe", but the airbag light was still on. It gave no error, no codes. Just was blinking. I tried several other ways, but no luck. I let the customer go because I couldn't do it. Why did it work for you guys and not work for me? It was the exact same part #.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.