PDA

View Full Version : Audi A3 quattro



bigdave83
27th July, 2010, 04:36 PM
Hi, i'm new to this site. Wonder if somebody can help me please

I'm after a tunned file to reflash my ECU for:

2001 A3 180BHP - Quattro _ KO3s

ECU Number: 06A 906 032 BJ - Bosch Number 0261206892
other numbers stamped on ECU:
26SA7193
1159 0057
00-10-18
ME7.5 0001
BPG Motronic

I have come across the ebay ones..... But I don't even want to give them a try. Just in case.

Has anyone got a good one that has been tested?

I was going to use MPPS for the reading/flashing and my VAG cable.

oldford
27th July, 2010, 04:49 PM
I would check injector duty cycle with the standard software first. That may be close to the limit all ready.

bigdave83
27th July, 2010, 05:17 PM
Ok thanks, i'll use vag com to check. I'll post my results, I can aslo upgrade the injectors to S3 ones if I need to.

I belive the stock injectors are 317cc so they should be fine, But still if I can get a log done tonight I'll post it.

Thank you for the reply,

ka-pa-za
30th July, 2010, 06:17 AM
all A3 180hp engine codes (auq, ary, app & ajq) can do 215hp 325Nm without stress. if you want to go higher you are looking at bigger injectors and turbo.

bigdave83
2nd August, 2010, 04:01 PM
Sounds good to me :) I havn't had the chance to check what the duty cycle is, but i have been told by a few people now thats its fine.

If I go above that then I will need new injectors, turbo and larger MAF.

Engine Code is 'ARY' Same as the TT

gsmflasch
7th August, 2010, 12:31 AM
@bigdave83
have you try already update ?

I?m looking files for my A3 3,2 Quattro_250hp (2005)

bigdave83
9th August, 2010, 11:51 AM
@bigdave83
have you try already update ?

I?m looking files for my A3 3,2 Quattro_250hp (2005)

No, no one has come back to me with a file. I presume that's what you meant?

peri
11th August, 2010, 12:38 PM
Hello I can help, but I need original file or SW version for both

rsibiza
11th August, 2010, 12:57 PM
Hello I can help, but I need original file or SW version for both

And of course you have read the forum rules.

this is not ebay,and selling files over this site is not allowed.

Just to be sure you will be fine,and not banned after just some day of staying here.

Best regards.

peri
11th August, 2010, 01:32 PM
Yes, but I can not download files because I have not yet sufficient privileges.

They could be built here, but also would have to send me. And like I said, I would suffice with the SW for the modified file. Would have no problem to upload it here if they do not care

gsmflasch
26th November, 2010, 09:25 AM
how i can read the files, i have enough equipment for it.