Copying 4C to TPX1 on AD900 pro help

[cyrixcard]

I purchased AD900 pro from
KeyMam LockSmith Shop | http://www.KeyMam.com-AD900 PRO transponder key programming tools (http://keymam.com/product_view.asp?pid=1188)

I also purchased Silca 4D Tex clone from same. Both work well but independently

I have not tried copying 4C to Tpx1 chip

question 1:

Is tpx1 chip re-writable many times like T5 chips/electronic 4C or write only once.

question 2
To copy 4C to tpx1, can you copy stand alone with the ad900 pro or must connect with computer and software and use transpronics software or any special procedure.

question 3
My Ad900 pro has transpronics software version 2.09

Question 4
Any new upgrade software for 2.09 or is this dangerous because mine is copy from china

Your answer will be most welcome

[jmauto]

I purchased AD900 pro from
KeyMam LockSmith Shop | http://www.KeyMam.com-AD900 PRO transponder key programming tools (http://keymam.com/product_view.asp?pid=1188)

I also purchased Silca 4D Tex clone from same. Both work well but independently

I have not tried copying 4C to Tpx1 chip

question 1:

Is tpx1 chip re-writable many times like T5 chips/electronic 4C or write only once.

question 2
To copy 4C to tpx1, can you copy stand alone with the ad900 pro or must connect with computer and software and use transpronics software or any special procedure.

question 3
My Ad900 pro has transpronics software version 2.09

Question 4
Any new upgrade software for 2.09 or is this dangerous because mine is copy from china

Your answer will be most welcome

Tpx1 you use many times like the T5 . Cloning 4C is stand alone option..

With the other questions I have no answer...
Good Luck!!!!!!!!

[dikseln]

About point 3. The version of AD900Pro increase (one or two ver) every month, for example 2week ago are 2.63

Point4. I don't know.

In same case the chinese clone don't make the crypto keys. I have tested 3 samples, the fixed transponder work perfect, but the crypto NO, in same case the instrument write copyed sucesfull but, really car don't start. I have the original tools

Bye

[cyrixcard]

Does China clone Ad900 pro copy 4C to Tpx1 ?

[irwin88]

Use PC mode.

[gopelhu]

Hi all,

All clone AD900 can copy 4C into TPX1 .

Regards,G

[cyrixcard]

Thanks for this great information. Does Ad900 clone copy 4C to TPX1 in PC Mode or in stand alone.

[ALBERTO_]

About point 3. The version of AD900Pro increase (one or two ver) every month, for example 2week ago are 2.63

Point4. I don't know.

In same case the chinese clone don't make the crypto keys. I have tested 3 samples, the fixed transponder work perfect, but the crypto NO, in same case the instrument write copyed sucesfull but, really car don't start. I have the original tools

Bye

Please can you upload the 2.63 software? of Transpronics
Thank you very much.

[big633]

how can copy 4c to tpx1 ?
how many time can program tpx1 tpx2 tpx3 ?
if many time
how can we do it

[big633]

i use ad900 from china can read 4c and 4d
can copy 4c 4d eectronic chip but it cannot start
and can not copy 4c and 4d chip
i have many 4c 4d Garbage

[her2011]

good friend.
I think you can make direct, but with the certainty Transpronics.
regard "
her2011

[keygargoil]

a 4c chip has very little data in it read the chip and use the type transponder data manually function and write to a tpx1, you need to check if it is a z4c because the ad900 may not beable to copy on to these, 4c uses 8 bites of info which is at the begining of the transponder data after 7e the rest isnt important, you can also use the tiris data if you read from the eeprom dump. for 4d the pages are locked and to read the secret key youll need a tpx cloner to calculate it, once a tpx2 is locked you cannot unlock it, i keep a eh2 head for testing because you are able lock the pages and to write over and over, tpx3 once programmed the chip is useless to you.
tpx1 right over and over
z4c otp
eh2
tpx2 otp
tpx3 otp