G-class 4e28b how to activate ecu

[doslamer]

hello to all, i have i strange problem i need to activate the ECU without the ak400. i have the ak400 but can not read the mcu 4e28b. i read that mcu with x-prog, after that i try to put in ak400 but without the mcu( because no connection between ak400 and 4e28b, the problem is not from cable), ak400 send error message. in the bottom i upload the picture from ECU and the eprom from MCU 4E28B. if somebody have clue how to activate the ECU without ak400 i will be very grateful.

[mercis]

hello to all, i have i strange problem i need to activate the ECU without the ak400. i have the ak400 but can not read the mcu 4e28b. i read that mcu with x-prog, after that i try to put in ak400 but without the mcu( because no connection between ak400 and 4e28b, the problem is not from cable), ak400 send error message. in the bottom i upload the picture from ECU and the eprom from MCU 4E28B. if somebody have clue how to activate the ECU without ak400 i will be very grateful.

coding with star

[doslamer]

Hello again, i make coding with DAS but i have message picture in the bottom, i read the immo eprom from immo box, make 5-6 key's with transponder like 7930,7935,T5 (with gambit & with MB key maker) but nothing, the red and green light still blinking. how can i check that this immo box is for this car, also i put back in the ecu and in the immo basic data( i mean when the car came in my garage). immo box number is 210 820 32 26. any info will be helpfull.

[doslamer]

sorry i forgot the picture. :banghead:

[bali motor]

your write virgin file to ecu. and make sync with das.

[doslamer]

yes i write virgin file and make the coding,but i have new info from the owner, he told me that engine and installation is from other crashed car. may be a making mistake when i doing coding with VIN from this car. i think that must be making the coding with VIN from other car and then everything will be ok .

[mercis]

vin is only on ecu