Arnett A700 update

[tr1ggerhappy]

Hi, am mighty confused. Have reflashed mates box with 28 bin and now box just turns on and displays 0000 and does not move or do anything else. Prev lost all channels and done all as advised but nothing. Any ideas ?

[bugaloo41]

you need to rescan as the channels are wiped out when you flash. From memory when you boot the box up a 1 page menu appears. Go to the last option to rescan for channels and choose your provider. Press the green button and locate the area for your provider and you should be good to go after that.

[tr1ggerhappy]

Tried it, menu does not appear on screen, nothing at all in fact, 0000 and nothing else.

[C64]

So you've flashed it a few times and it always goes to 0000 with no response from the remote?

[tr1ggerhappy]

yes thats it exactly

[Fspiders]

Try the 29-11-08 firmware.

[tr1ggerhappy]

tried 29 firmware, no difference, still just sits on 0000 on display, nothing appears on TV screen:dontknow:

[soljan11]

:hmmmm:
you need to rescan as the channels are wiped out when you flash. From memory when you boot the box up a 1 page menu appears. Go to the last option to rescan for channels and choose your provider. Press the green button and locate the area for your provider and you should be good to go after that.


:hello:
Hi bugaloo
There is a post in other forum that a new 29112008 kv update is out.
If possible Can you find out if this is true or false. I just think someone has made an error in the date( 29112008 instead of 28112008 ).
:roflmao:
:hmmmm:

[bugaloo41]

Soljan the new fix was released yesterday I posted the "fix" in this thread

http://www.digital-kaos.co.uk/forums/f10/new-kryptview-fix-14249/

[tr1ggerhappy]

OK cheers going to give this a try now

[tr1ggerhappy]

no good either.....

[soljan11]

Soljan the new fix was released yesterday I posted the "fix" in this thread

http://www.digital-kaos.co.uk/forums/f10/new-kryptview-fix-14249/

Thanks bugaloo
Saw the new one in 'downloads' .. did not see that sunday pm so was confused:bird:

[tr1ggerhappy]

Hi, still hanging here. The box just sits with 0000 on its screen and nothing else. Any further suggestions? Also how do you do a factory reset on it? Might help.:beheaded:

[bl4ggs]

Take a look in the installations menu at the bottom.

[tr1ggerhappy]

sorry wont do that either, nothing output to TV at all.:guns:

[dean.morrison]

New to t6his forum, just an ageing AV installer trying to get to grips with all this new fangled technology. Got a problem with an Arnet A700c looking for latest updates to download if anybody outhere can help? please.

[wilf]

when did this happen? do you have right cables to put the latest fix on? the latest fix is under kryptview forum 30/11/08

[bugaloo41]

New to t6his forum, just an ageing AV installer trying to get to grips with all this new fangled technology. Got a problem with an Arnet A700c looking for latest updates to download if anybody outhere can help? please.


the fix can be found 4 posts above your original post. theres is also instructions in that thread. any probs post back.

[bigto1000]

am trying to download the 291108 version, but it says i need software to support this. any 1 got any ideas wat i need

[wilf]

29/11/08 is the software, you need the loader and the null cable or usb converter cable to send it to the box. if you mean you cannot access the software you will need winrar to extract the files with.