Eprom adapter

[florinyes]

After a reliable soic8 eprom adapter to use with x-prog M or UPA.

I have find this: SOIC 8 / SOP 8 WAY TO DIL ADAPTER 200mil -209mil ((UK)) on eBay (end time 02-Aug-10 12:17:13 BST) (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=120591506831&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en)

and this: SOIC 8 / SOP 8 WAY TO DIL ADAPTER 200mil -209mil ((UK)) on eBay (end time 02-Aug-10 12:17:13 BST) (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=120591506831&ssPageName=STRK:MEWAX:IT)


Or would be this a better option?? LEWMAX PROGRAMMING|LEW08|SOCKET MODULE, SOIC/DIL, 8WAY | Farnell United Kingdom (http://uk.farnell.com/lewmax-programming/lew08/socket-module-soic-dil-8way/dp/698180?Ntt=698-180)


What do you people use?

Regards

[florinyes]

Is this posted in the wrong place?? If so MOD's please move it where it belongs.

Regards

[racin-snake]

i use the first one you posted ? works ok if the legs are clean

[florinyes]

Is that on X-prog?

[racin-snake]

nope sory
its on a zif type programer
but you can wire direct to the headers on these adapters ?
using jumpers to the headers from the xprog or upa
and it should still read ok
worth a go save spending the cash for yet another adaptor
i might try it to confirm

[florinyes]

Yeah, I know what you on about, but a bit tired of not proper connections and prety close to spend 60-70 quid on a good adapter..Silly I know..:coffin:

[racin-snake]

have you tried grabers ?

HP 5090-4833 SET 20 MINI GRABBER TEST CLIPS fd2k3 on eBay (end time 24-Aug-10 23:04:52 BST) (http://cgi.ebay.co.uk/HP-5090-4833-SET-20-MINI-GRABBER-TEST-CLIPS-fd2k3-/120562274594?cmd=ViewItem&pt=UK_BOI_Electrical_Test_Measurement_Equipment_ET&hash=item1c12125122)

i bought these
saves a lot of hastle and can be done in or out of circuit?
these are smaller but good http://www.tequipment.net/Pomona6490.asp
this is full set expensive buy built to work with xprog 0.025 pitch theyre on my shopping list
http://www.warwickts.com/product_Model+WLX016++Micro+Hook+Assembly.html

[Fallen]

I've bought a few things off these guys and there really good.
They make custom adaptors and cables for different programmers. You won't have to explain to them what an Xprog or a UPA is, there on the ball.

Test Clips, Adapters and Test Supplies | Warwick Test Supplies (http://www.warwickts.com/)

[florinyes]

have you tried grabers ?

HP 5090-4833 SET 20 MINI GRABBER TEST CLIPS fd2k3 on eBay (end time 24-Aug-10 23:04:52 BST) (http://cgi.ebay.co.uk/HP-5090-4833-SET-20-MINI-GRABBER-TEST-CLIPS-fd2k3-/120562274594?cmd=ViewItem&pt=UK_BOI_Electrical_Test_Measurement_Equipment_ET&hash=item1c12125122)

i bought these
saves a lot of hastle and can be done in or out of circuit?
these are smaller but good Pomona 6490 Micro SMD Grabber, .025 in Pitch Pomona 6490 (http://www.tequipment.net/Pomona6490.asp)
this is full set expensive buy built to work with xprog 0.025 pitch theyre on my shopping list
WTS - Products (http://www.warwickts.com/product_Model+WLX016++Micro+Hook+Assembly.html)

I've got this but much quicker with a proper adapter.

[florinyes]

I've bought a few things off these guys and there really good.
They make custom adaptors and cables for different programmers. You won't have to explain to them what an Xprog or a UPA is, there on the ball.

Test Clips, Adapters and Test Supplies | Warwick Test Supplies (http://www.warwickts.com/)


Last night seemed reasonable to pay 70 odd quid for a soic8 to dil8 adapter. just woke up now and looks madness. Probably the 3M soic8 grabber at "only" 14 quid look more like it. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=110555812620&ssPageName=STRK:MEWAX:IT

[WarwickTestSuppliesLtd.]

For some reason my previous message got booted - I'll try again seeing as I don't believe I'm doing anything that others aren't by giving links to things:

There are two products which might help and you can find them both here:

WTS - Products (http://www.warwickts.com/category_adaptors.html)

You can get the grabbers and ribbon cables and test clips from us too. Plus if there's something you want that we don't do we can work on it for you....

[WarwickTestSuppliesLtd.]

Thanks for the nice recommendation from fallen too. It's nice to see comments like that - nice to know we're getting it right for you guys.

[Fallen]

Just goes to show, you never know who is watching! Lucky I didn't say anything bad about you guys... :)

The admins here are pretty fair. So long as your not here to mercilessly flog your products and don't mind handing out technical help i'm sure you will be welcomed.

Oh, welcome to DK :)

[WarwickTestSuppliesLtd.]

Just goes to show, you never know who is watching! Lucky I didn't say anything bad about you guys... :)

The admins here are pretty fair. So long as your not here to mercilessly flog your products and don't mind handing out technical help i'm sure you will be welcomed.

Oh, welcome to DK :)


Thanks very much for the welcome - no we don't mind talking to people about technical issues as it's the best way for us to learn about the things you guys need (or like).

And - as an afterthought, we're not here to mercilessly flog anything - not our style!

[WarwickTestSuppliesLtd.]

this is full set expensive buy built to work with xprog 0.025 pitch theyre on my shopping list
WTS - Products (http://www.warwickts.com/product_Model+WLX016++Micro+Hook+Assembly.html)

By the way - these are available seperately if people want them - you don't have to buy a full set!

WTS - Products (http://www.warwickts.com/category_e_z_hook_grabbers_hooks.html)

[Fallen]

Is there any chance of some sort of multi-adaptor?
So I can use the same soic clip and lead with a few different programmers?
At the moment I have 4 different leads and clips.
Some sort of interface box perhaps?

[florinyes]

Is there any chance of some sort of multi-adaptor?
So I can use the same soic clip and lead with a few different programmers?
At the moment I have 4 different leads and clips.
Some sort of interface box perhaps?


That would be something...


PS. Sorry for not getting back quicker..Been so busy lately and lots of jobs to get finished before going on holidays.
I've used WTS and I can vouch for them too. Nice service!

BR

[Zmann]

The clips can also be inserted in ZIF.

[florinyes]

Cheers mate! Ordered and eeprom socket dip8. Hope I'll eliminate errors with this..


Best regards

[Fallen]

TMPRO have just started to use an onboard programer. Yet another cable I have to buy! :(

[rsibiza]

After a reliable soic8 eprom adapter to use with x-prog M or UPA.

I have find this: SOIC 8 / SOP 8 WAY TO DIL ADAPTER 200mil -209mil ((UK)) on eBay (end time 02-Aug-10 12:17:13 BST) (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=120591506831&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en)

and this: SOIC 8 / SOP 8 WAY TO DIL ADAPTER 200mil -209mil ((UK)) on eBay (end time 02-Aug-10 12:17:13 BST) (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=120591506831&ssPageName=STRK:MEWAX:IT)


Or would be this a better option?? LEWMAX PROGRAMMING|LEW08|SOCKET MODULE, SOIC/DIL, 8WAY | Farnell United Kingdom (http://uk.farnell.com/lewmax-programming/lew08/socket-module-soic-dil-8way/dp/698180?Ntt=698-180)


What do you people use?

Regards


Me personally prefer this one:

http://media.digikey.com/photos/3M%20Photos/923655-08.jpg

For some eeproms is possible to read write without unsolder
(EX: Golf 3 Dash,just bridge the oscillo near eeprom,and flash on pcb)

Just take care there are no residus on the pins,work well...On board,Offboard:celticparty:

[rsibiza]

:D

Thanks mate.


Hy.

DID you READ the FORUM RULES?

This is no ****ing ebay...its a forum...

No advertising for products you produce..

[rsibiza]

Is there any chance of some sort of multi-adaptor?
So I can use the same soic clip and lead with a few different programmers?
At the moment I have 4 different leads and clips.
Some sort of interface box perhaps?


Why not simple use programmer able do all works...

I use Labtool 48 UXP....and until today found no flash,eprom or mcu i cannot flash with it.

Allround talent:rock:

[jojo1212]

wts that labtool48 uxp ???
i never heard of it

[rsibiza]

wts that labtool48 uxp ???
i never heard of it


The Labtool 48 UXP is a universal programmer able read/write almost all eproms,flash eproms and mcu's....a real alround talent.

LabTool-48UXP (http://www.aec.com.tw/LT-48UXP.htm)

[xoom]

Nice Programmer and ofcourse nice price :D i use Top2049.. not the best programmer but do the job :)

[qubits]

has anyone tried this set of micro grabbers?
Smd Test Probe Set | Rapid Online (http://www.rapidonline.com/Cables-Connectors/Smd-Test-Probe-Set-17-2576/?sid=eddb3cc1-59a7-4c7d-b952-dabe77e396ee)
I just bought a Ponoma set (of 12) for almost $200. But these look like Ponoma clones @ half price.

Now I better find more jobs to pay for these!

[PierreTheron]

Was thinking about making my own with old syringe needles from druggies m8 ...