PDA

View Full Version : Golf III ecu bosch 0261203314/315 immo off needed



Amine13
1st August, 2010, 08:14 PM
Hello Mates,
here this car is without transponder, and doesn't start, GOLF III 1996 with ecu bosch 0261203314/315 (as on the ecu box).
I Erased directly the file on 87C510, without reading (I haven't the programmer), and after get programmer, programmed with attached file, on a ST M27C512; put back, but no start always, and not een fuel pump hearing when put back ignition, I would try another 27C256 that I have, but not sure from the result.
My question is if the 87C510 can be replaced with thpse 27Cxxx ; and if there is another hint for this; because I saw on forum; that immoff can be done from immobox... really confused.
All the best for forum members !!
Guys, I just tried M27C256 with same file, and same problem; no start, no fuel pump working...
ANy ideas ?!

hartklep
1st August, 2010, 09:11 PM
You need 27c512

ecu: 0261203314/315 Eprom: 27C512
Checsum :432F

Amine13
1st August, 2010, 09:34 PM
OK mate, have you the file for this please ???
here is my file given kindly by Umoussa(Immoff that I used and no result !!)

Amine13
3rd August, 2010, 09:43 AM
Fixed mates, car starts after making Immobox with off file !

commrace
12th December, 2010, 10:57 PM
Fixed mates, car starts after making Immobox with off file !
has your car started after you replaced 87c510 with ST M27C512 and set immo to off mode ? i want to do chip tuning to my VW Golf Mk3 and my ecu chip is 87c510 and i don`t know exactly if 27c512 works directly without an adapter.

Amine13
13th December, 2010, 03:15 PM
27C512 will fit in place without adapter, the problem, I tried this, and car didn't started, if you want to modify file , either erase 87C510 and rewrite it (after read of course), or change it with similar virgin Chip. For my case, I did Immo off from Immobox, with HC05 programming.
All the best.

commrace
13th December, 2010, 09:19 PM
thanks for the information. I only have Tomsad Willem Pro 4 ISP and i want to do some chiptuning on my vw golf mk3 AEA engine ... something like supercharger ... or maybe turbo ...

commrace
14th December, 2010, 05:55 PM
can anyone know if we can read 87c510 with willem pro 4 isp ?

Amine13
14th December, 2010, 06:08 PM
Try to look in supported devices in your programmer list.

commrace
14th December, 2010, 06:17 PM
i want to do immo off to my vw too but don`t know how ... can you help me please?

cqae
15th December, 2010, 02:25 AM
commrace, start you own thread rather than hijacking this one.
but you will need to post a year & type of your car as they all run differenet systems.
but most times it will involve you reading a chip inside an immo unit or dashboard & wirintg a modified file back to it. Many vw can be done via diagnostic socket, but not all

sogaro
15th December, 2010, 05:55 PM
What file did you use for the im*o off in the im*obox?

A11463
15th December, 2010, 11:11 PM
What file did you use for the im*o off in the im*obox?

Motorolla HC05B6

cqae
16th December, 2010, 11:40 PM
I just did a golf 3 too & used this immo off file & can confirm it works.
I used xprog to re-write to the hco5 in the immo box

wieslov
30th July, 2015, 05:46 AM
Golf 3 1.6 0261203314/315 032906026
Hello needs to immo off

geocity
4th June, 2021, 06:24 PM
Fixed mates, car starts after making Immobox with off file !
Which file m8?