vdo cdr2005 e code help

[martiboy]

Hi could any one help me with a code for a cdr2005e. Im not sure if i have read the dump correctly.

[siti]

Hi could any one help me with a code for a cdr2005e. Im not sure if i have read the dump correctly.



Hmmmm....very confused your dump :wink:


>>>>>>> 9560 <<<<<<<<

[printer22]

new to this but try 9560 let me know how u get on

ahh too late again

[martiboy]

Thank you to both posters. Could i ask what software you used to decode the radio. I tried nyo4 to do it but had no success. Thanks again for the help

[siti]

Thank you to both posters. Could i ask what software you used to decode the radio. I tried nyo4 to do it but had no success. Thanks again for the help

>>>>>> only windows calc <<<<<<<

[bonus2010]

Thank you to both posters. Could i ask what software you used to decode the radio. I tried nyo4 to do it but had no success. Thanks again for the help

I see you're using ponyprog. (e2p) file. When you are in
ponyprog - save the file as a ".bin" file. Use the ".bin" file
when in NYO4 - you should recover code no probs.

[martiboy]

I see you're using ponyprog. (e2p) file. When you are in
ponyprog - save the file as a ".bin" file. Use the ".bin" file
when in NYO4 - you should recover code no probs.

Ah thank you. now i know where im going wrong. Again thanks to every one who helped.

[siti]

I see you're using ponyprog. (e2p) file. When you are in
ponyprog - save the file as a ".bin" file. Use the ".bin" file
when in NYO4 - you should recover code no probs.





have you tried this?:bounce:

[bonus2010]

have you tried this?:bounce:

Yes Siti - before and did work.

However, this time to be honest, it hasn't worked.:banghead:

Just to expand, I loaded martiboy's .e2p file into Ponyprog software - saved it as '.bin' file
and then loaded .bin file into NYO4 and incorrect code '2A9E' shows.

You've got a good Windows Calc! Emm....