socket adapter 29f400

[BATLER]

hello!!
i need a socket adapter for m29f400bb chip.i must program it many times in the same ecu and i dont want to solder many times and harm the ecu.i cannot find a site that has such adapters ,i would appreciate any help

[deffc0n]

I have this programmer

http://www.eliptor.pl/galerie/u/universal-flash-programm_12.jpg

and many adapters:
http://www.eliptor.pl/galerie/a/adapter-8-16-bit-flash-b_188.jpg

for :

http://www.eliptor.pl/galerie/p/pamiec-flash-29f400-fuji_633.jpg

[BATLER]

thank you for helping m8,i saw a very smaller socket soldered on a mm48p ecu.it had the size of the flash but only legs and a plastic above that you push left -right and put inside the flash memory.have you any idea where i can find something like this?
program with labtool48uxp and i have to solder many times

REGARDS thanks

[swat cat]

something like this?
SIVAVA - Buy It Now (http://www.sivava.com/buynow.php?pd=B15)

[BATLER]

thank you m8 but it is not the adapter that i need!it is small,like the size of the flash memory.it has legs just like the flash but above has a hole that you put the chip and around a plastic that goes left-right and release or keep the chip closed inside with a small movement!sorry for my bad english..

[tachonow]

I have this programmer

http://www.eliptor.pl/galerie/u/universal-flash-programm_12.jpg

and many adapters:
http://www.eliptor.pl/galerie/a/adapter-8-16-bit-flash-b_188.jpg

for :

http://www.eliptor.pl/galerie/p/pamiec-flash-29f400-fuji_633.jpg
Glad to see that. I have also this programmer from Epsylon Poland. As usual their support is a shit. Please tell me what software can be used to manage them work.
Thanks.

[rsibiza]

Do you need the 29f400 adapter to solder inside the ECU?

Thats with some plastic pieces.

[kptuning]

I think he needs a socket, so he can remove/mount chip fast without soldering.

[swat cat]

PSOP44 Sockel Meritec - IC Sockel PSOP44 SMD Meritec - www.chip-service.de (http://www.chip-service.de/product_info.php?info=p191_PSOP44SocketMeritec.htm l)


http://www.chip-service.de/images/product_images/original_images/PSOP44_Sockel_Meritec.jpg

[Chaser]

I think I know what he means as I just bought that one above and a few of these... Same site just a different product for the PSOP 44 chips

http://www.chip-service.de/images/product_images/original_images/PSOP44_Sockel_Yamaichi.jpg

PSOP44 Sockel Yamaichi - IC Sockel PSOP44 SMD Yamaichi - www.chip-service.de (http://www.chip-service.de/product_info.php?info=p190_PSOP44%20Socket%20Yamai chi.html)

Cheers :)

[rsibiza]

I think I know what he means as I just bought that one above and a few of these... Same site just a different product for the PSOP 44 chips

http://www.chip-service.de/images/product_images/original_images/PSOP44_Sockel_Yamaichi.jpg

PSOP44 Sockel Yamaichi - IC Sockel PSOP44 SMD Yamaichi - www.chip-service.de (http://www.chip-service.de/product_info.php?info=p190_PSOP44%20Socket%20Yamai chi.html)

Cheers :)


Yep,this one is lot easyer to solder as the first postet one.

Just need to solder very fine with lot of flux,if not the cover will not close well:idea:

[Chaser]

I found they had a weird scale on their postage, its worked out cheaper to buy 4 twice than say 7 once or something like that.
The second tier of postage charges is quite large. you'll see what i mean
I have this socket in my A3 1.8T and it seems quite secure and unlikely to unclip but I'll drive around for a few months and see if it fails. I think I'll use these on the customer cars whilst tuning then solder the eeprom on directly once finished. I bought the other style of socket too just to test. Its seems more likley to dislodge so not a permanent solution at all.

[rsibiza]

I found they had a weird scale on their postage, its worked out cheaper to buy 4 twice than say 7 once or something like that.
The second tier of postage charges is quite large. you'll see what i mean
I have this socket in my A3 1.8T and it seems quite secure and unlikely to unclip but I'll drive around for a few months and see if it fails. I think I'll use these on the customer cars whilst tuning then solder the eeprom on directly once finished. I bought the other style of socket too just to test. Its seems more likley to dislodge so not a permanent solution at all.


If on first start it doesnt fail,it doesnt fail after weeks,as every pin is pushed by sping down,but as you say...for best connection after your work,solder flash directly into ecu,like original:rock:

[BATLER]

thank you all for your experience and your help,this is what im looking for :rock:

[illestibor]

Have anybody an adapter schematic to program a flash 29f400bb with willem.how to solder pins?thanks.:help:

[grinovsky]

you need adapter for willem

[rappttor]

just buy something like this
PSOP44 SOP44 PSOP SOP Adapater 29F400 Wellon Universal - eBay (item 120682368927 end time Mar-10-11 08:52:49 PST) (http://cgi.ebay.com/PSOP44-SOP44-PSOP-SOP-Adapater-29F400-Wellon-Universal-/120682368927?pt=LH_DefaultDomain_0&hash=item1c193acf9f#ht_1356wt_905)

you can find it also here obdauto.com

[illestibor]

Hello brothers.

Definitly i don't want to buy but nobody was give me some pictures about one.But here is with pictures:

PSOP 44 - DIP32 adapter for willem programmer

I drowed the straps from other side with black marker.

[chriskross]

Hi!

can i also use xprog m for this 29f400?

[Skunkodus]

Hey guys hope you all well

Ok i need to program AM29F400BT flash using TL866A Mini Pro but dont have
the SOP44 TO DIP40 adapter
I can buy online but will take 3 weeks to reach me and i dont
have that much time left.
Is it possible to program the chip using the ICSP port ?
If so ,does anyone have info on what pins to use ?
Or if anyone can help me with the schematic or drawing
layout of the adapter i can try to make one
Please i really need help

Thank you in advance ..