Audi TT cluster swap from Audi A6, need help

[A318T]

Hi all,
Trying to install an 2001 Audi A6 dash FIS (4B0 920 933 N) into a 1999 TT, original dash (8N1 919 860C). Everything is connected, most of the bulbs and sensors are short to ground and happy about that BUT I can not this dash to allow to start the car, I went thru the adapting keys a few times now and the dash is OK with the keys. When I try to start the car, it starts for a few seconds and dies, ECU has a "Blocked by immo" code... I don't understand what is wrong. Can someone help me please and guide in the right direction.

Dumps from both dashes are attached, just in case.

[A318T]

Ok, after trying to upload another dump into the new cluster, I now have it in DEF.

What do I do with that?
EEPROM 93c86

[andre800]

Maybe it would help if you have the Vag Com and PIN code..
Ross-Tech: VAG-COM: Immobilizer 2 Instrument Cluster Swapping (http://www.ross-tech.com/vag-com/cars/Immo2-cluster-swapping.html)
Ross-Tech: VAG-COM: Immobilizer 2 ECU Swapping (http://www.ross-tech.com/vag-com/cars/immobilizer2.html)

[A318T]

Yeah, I did have both logins. Still couldn't adapt. :(