Opel Antara FAP problem

[zxc11]

Hi,
can somebody remove FAP from this EDC16c39 ECU?
I try with ecusafe from here but with no luck.
Thanks

[badisan]

Hello,

Here you go..

[zxc11]

Thank You,
but this is same file like ecusafe's. With what soft is generated file?

I already tried ecusafe. After checksum correction car started, but if remove pressure sensor from dpf mechanically and left electrically connected, lamp is on, and DTC is stored in memory.
Maybe I do something wrong, but I think DPF is not completely removed from file.
Thank You again
I accept any ideas. Problem is not resolved.

[zxc11]

Hi steich_78,
can You remove for me FAP from that file with original version? If not, at least tell me on which addresses are differences?
Thank You

[daviee]

What tool you use for read ?
I think there is missing maps

[ibm]

In version 1.9.2.0 (posted by Zogldi) get a different dump ...
Try and post result.

[zxc11]

Hi,
I will tomorrow
I hopе

[zxc11]

daviee,
tool is cmd bdm 1255 clone.
No more maps in that ecu, in mpc562 is no memory at all, I post external flash and 95xxx contains only config and immo data( I think) .
best regards.

[zxc11]

Hi,
we have progress. With previous version - lamp ON and DTC244B,2452, With new - lamp is OFF :rock: but still DTC in memory 2002, 2453 :banghead:
So far , will drive, and will see what will happen.
And ... will check wit next crack version.

Тhanks

[miha99]

I also have a problem on EDC16c39 ECU Opel Vectra C cdti.I modificate flash with ECusafe cracked and remove fap, car works on idle OK but when I accelerate DTC lamp ON and program go in safe mode no mather if I unpluged sensors for FAP or not.

[zxc11]

Hi,
Miha99, post original file and tel us which cracked version you use?

Best regards

[miha99]

Hello zxc11 (http://www.digital-kaos.co.uk/forums/members/78114-zxc11/), I use ECUSAFE 1.9.1.6 version, and I attach original file readed via BDM.If you need I can upload file managed with my ecusafe program.

[taxi300]

Hi,
can somebody remove FAP from this EDC16c 307 2lhdiECU?
75vG.
028101108110
1037364193B0
75WF
2S03C85A000185
please
thanks !

[taxi300]

75vG.
028101108110
1037364193B0
75WF
2S03C85A000185

[miha99]

Hey taxi300 are you sure this is EDC16c ECU I have feeling you have edc15?!

[zxc11]

Hi,
Miha99 is right, this is edc15. Taxi300 try this and post a result.

[jaksa27]

Please remove FAP or OPEL SIGNUM 1.9 CDTI 150PS.:(
for the help I am grateful

ECU SW: 1037379432
ECU UPG SW: 1037383690
Spare Part: 0 281 013 409 55 205 632 ES
Microcontroller: MPC555/6
External Flash: Am29BL802C

Hotfile.com: One click file hosting: OPEL SIGNUM 1.9 CDTI 150PS FAP FLASH.rar (http://hotfile.com/dl/66439159/99ae213/OPEL_SIGNUM_1.9_CDTI_150PS_FAP_FLASH.rar.html)

THANKS

[miha99]

Check this out

[jaksa27]

Thanks I will check and know

[jaksa27]

miha99 unfortunately the engine on this file isn't starting itself.
A lamp is missing heck.

[miha99]

Of corse you need to corect checksum!

[elchip]

75vG.
028101108110
1037364193B0
75WF
2S03C85A000185

Test these pls.And report if is ok.

30190

[jaksa27]

I did it BDM100.He calculates hecksum:(

[mariooo]

Ciao a tutti ho un problema dovrei disattivare il Fap dal file ori di questa macchina qualcuno mi pu? aiutare? avete ecusafe ? oltre al Fap si pu? disattivare anche la EGR ? Accendono spie di anomalie facendo questa modifica di disattivazione ?

Hello everyone I have a problem I should disable the file from Fap gold of this machine can someone help me? ecusafe you? addition to FAP can also disable the EGR? Lights illuminate anomalies by this change of decommissioning?

[jaksa27]

Colleagues due to.

[gaz51]

Of corse you need to corect checksum!

Hei, how do you guys correct the cheksum on EDC16 after removing DPF with Ecusafe?
cheers

[gaz51]

got the ecus@fe moded file`s checksum corrected with winols :-).
seems to be working fine as the car started with no problems.

[gaz51]

Coming back to Opel Antara 2,0D DPF. Can anyone tell if the below DPF OFF file has really DPF functions turned off? I did it with ecusafe 1.9.3.0.
Also I attached the ori file if anyone is interested.
Thank you.

[gaz51]

Hi
Just for information:
Antara 2007 2,0D 110kW
DPF-OFF sw created with ecusafe 1.9.3.0. Programmed ECM via BDM100 clone. Did not remove the DPF physically. Let the car drive for 5 days and DPF light on dash illuminated. Turned out that engine ecu still counted the DPF sooth % (with 5 days it reached 160%) and sooth mass (with 5 days it reaced 45g). Probably because the DPF started to clog up and differential pressure sensor started to show this to ecu. We removed the DPF from exhaust system, reset the DPF % and soot mass to zero. After the next 5 days these numbers in the ecu live datalist were still 0 and no DPF light on dash has not illuminated.

[cezars1]

Please remove FAP or OPEL COMBO 1,3 CDTI .
for the help I am grateful

W0L0XCF2574252137
55571619 MXMAG
01246O204D
3422C166
M06001
Z13DT
09 03 3620
I read GALLETO 1260