View Full Version : tuned BOXER 2007
CIRCUIT.FR
10th August, 2010, 10:01 AM
HI
I would like if i can tuned BOXER 2.2HDI year 2007.
It is EDC15, EDC16......?
THANKS
rsibiza
10th August, 2010, 02:49 PM
HI
I would like if i can tuned BOXER 2.2HDI year 2007.
It is EDC15, EDC16......?
THANKS
Check by getting data with your flash tool...and you will know if it's EDC15/16
jnoroeste
10th August, 2010, 05:27 PM
Hi M8, after 2003, I think is EDC16.
But, chiptuning tool will tell you as rsibiza said.
rsibiza
10th August, 2010, 05:32 PM
Hi M8, after 2003, I think is EDC16.
But, chiptuning tool will tell you as rsibiza said.
Not for sure.
Did an alfa phedra,from documents was an 2006,but maybee was older product date.
Anyway this car also 2.2 engine from PSA had EDC15 inside...
The safe way,look at the ECU,or get data by Flash tool.
CIRCUIT.FR
10th August, 2010, 11:13 PM
OK
When i have car, i control that...
Thanks
CIRCUIT.FR
12th August, 2010, 02:51 PM
HI
I have find ecu, it is a VISTEON....
Can you read this ecu for obd tool or read eprom with programer???
rsibiza
12th August, 2010, 03:10 PM
HI
I have find ecu, it is a VISTEON....
Can you read this ecu for obd tool or read eprom with programer???
What flasher you use?
Connect it,and get data or ID ECU,depending on what tool...and you will see if you can read and write this ECU
rsibiza
12th August, 2010, 03:15 PM
Have checked carlist for Flashtec
The boxer doesnt exist in carlist...
You may try open ECU and search for Flash or eprom
rsibiza
12th August, 2010, 03:19 PM
OK,wait...found something about tableflashing
Its a visteon DCU102?
Needs solder 2 x 1kohm resistor inside ecu,and flash by K-Line on connector and vcc+ gnd
check this image;)
CIRCUIT.FR
12th August, 2010, 04:51 PM
Sorry i can't read zip file.
Could you give me again?
rsibiza
12th August, 2010, 05:24 PM
Try maybee rename it .mht
CIRCUIT.FR
13th August, 2010, 08:04 AM
Try maybee rename it .mht
Sorry but when i unzip this i have archive error....
easytech
14th August, 2010, 02:25 PM
Does anybody know how to change the speedlimiter in these Vistoen ecu's?
del635
17th August, 2010, 02:58 PM
Not for sure.
Did an alfa phedra,from documents was an 2006,but maybee was older product date.
Anyway this car also 2.2 engine from PSA had EDC15 inside...
The safe way,look at the ECU,or get data by Flash tool.
Also done a 2006 boxer with 3 plug edc15
edit, I should read the whole in future :)
CIRCUIT.FR
21st August, 2010, 10:32 AM
Try maybee rename it .mht
Could you give me other file please.......
CIRCUIT.FR
1st September, 2010, 10:21 AM
SORRY
But i can't read this file.....
Please help me
CIRCUIT.FR
28th September, 2010, 11:38 AM
please could you give me ather information....
THANKS
LATTINO
23rd March, 2011, 01:44 AM
OK,wait...found something about tableflashing
Its a visteon DCU102?
Needs solder 2 x 1kohm resistor inside ecu,and flash by K-Line on connector and vcc+ gnd
check this image;)
please can upload again the file?
Regards
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.