PDA

View Full Version : obd mileage change



nabzo
12th August, 2010, 02:24 PM
is there a device that can do mileage change via obd ?

on which cars can it be done on

is there a device that can do all cars via obd mileage change and reset airbags ?

juniormaxxx
12th August, 2010, 02:36 PM
I dont think that a tool for doing it all exsists in one module...

for doing mileage audi or VW VAG tacho is good

and for bags>Airbag Resetting Service - uobd2.com - airbag reset tool and oil reset tool (http://www.uobd2.com/wholesale/Airbag--Resetting-Service/)

nabzo
12th August, 2010, 02:51 PM
which there was a devcie that could do all the makes and models via obd

imanewbie
12th August, 2010, 07:33 PM
but theres not you can only do a small amount of cars via obd. mercedes,bmw,vw,seat,skoda,chrysler, some vauxhalls audi maybe some odd other ones like early porsche but thats about it.

juniormaxxx
12th August, 2010, 08:12 PM
As I said there is no such thing as universal divece for that what you need......even those tools you can order can doo all of the cars they say....still you will need to improve soldering skills

tiomilo
12th August, 2010, 09:17 PM
is there a device that can do mileage change via obd ?

on which cars can it be done on

is there a device that can do all cars via obd mileage change and reset airbags ?
there is !! but only for certain cars ! example :vag tacho is Volkswagen n'd audi only some chinese tools can do the job on others car too, but i don't know one for all brands !

nabzo
12th August, 2010, 09:31 PM
Ya I have uzipro it does vw n audi it does mileage correction reset airbags login pins and key adaptation and reads fault codes and clears fault codes its a handheld device that also supports gm and delphi

tachonow
12th August, 2010, 10:12 PM
The best tool which support all brands by obd is DP3.

kautuvera
13th August, 2010, 12:09 AM
Hi, im want to buy this device but I just want to use a cable OBD2 What is your opinion?
enigma and dsp and digiprog3 Which is better

motorsport
13th August, 2010, 12:19 AM
Hi, im want to buy this device but I just want to use a cable OBD2 What is your opinion?
enigma and dsp and digiprog3 Which is better

digiprog is very good tool but more expensive tham enigma and dp3:rock:

kautuvera
13th August, 2010, 12:57 AM
You ever use it to have?

nabzo
13th August, 2010, 04:08 AM
Use uzipro very good on vw and audi and delphi and gm .is reads and clears fault codes it resets airbags does mileage correction in a split second it reads login pins and it does key adaptation in just under a minute very good tool supports every year model of car.all this is done via OBD

Chech this guy out :: Welcome to Adam Engineering :: (http://www.adamengineering.co.za)

I have never ever had a problem with this device

DNG2010
19th August, 2010, 10:21 PM
Uzipro is not recommended. Check out this site

UZI PRO | Cardiag Global (http://www.cardiag.com/uzi-pro/)

They say "We do not sale UZI PRO any more due to huge problems with this tool. Manufacturer sales this device with no support and there are a lot of functions that even doesn?t work at all."

So between everything i would say Enigma or DSP III. I keep reading everywhere that DSP III is copy allot of things from Enigma. So not really sure....

eladswift
19th August, 2010, 11:34 PM
I have VAGPROG - Great for VAG cars.
I also Have Enigma - GREAT al rounder for all others..

You will not find any tool that does ALL / anything better for long - they all crib each others development..

I started with Dashfixer - now own several tools, the ones that make my jobs easier - there is no single tool solution..

nabzo
20th August, 2010, 04:07 AM
DNG2010

Have a look at this site
:: Welcome to Adam Engineering :: (http://www.adamengineering.co.za)

If my device is so bad like they say it is why are people still buying it from me and why am I still giving support .makes u think hey hmmm some people are just unbelievable but thank you for Bringing this to my attention

drpeter
20th August, 2010, 06:13 AM
DNG2010

Have a look at this site
:: Welcome to Adam Engineering :: (http://www.adamengineering.co.za)

If my device is so bad like they say it is why are people still buying it from me and why am I still giving support .makes u think hey hmmm some people are just unbelievable but thank you for Bringing this to my attention

Does your tool also do vw 07- up by OBD2 and 08-Up (NEC) by OBD2?

DNG2010
20th August, 2010, 06:45 AM
DNG2010

Have a look at this site
:: Welcome to Adam Engineering :: (http://www.adamengineering.co.za)

If my device is so bad like they say it is why are people still buying it from me and why am I still giving support .makes u think hey hmmm some people are just unbelievable but thank you for Bringing this to my attention

First I did not know your the seller and this is your product, and second I just said what I read on the web. If you feel this is wrong I suggest talking to the web site because its a review of your product and i was using to help a fellow member of DK.

nabzo
20th August, 2010, 08:04 AM
Yess I do knw I have had a word with the guy from cardiag .but thank you once again for bringing it to my attention .and no the device is still operational I still sell it and I give the support the device uzipro I and my team has developed it .sometimes people can be nasty.