BMW ADS interface

[dimitar]

Here is the ADS schematic. I hope someone can share the dump for GAL16

[dimitar]

Here it is OBD-ADS without GAL tested on E34, E36, E38, E39, E46, E60. Works perfect with inpa. DS2_1 and DS2_2 goes to ground to activate OBD , left unconected works as ADS

[cipijoint]

here is jed file for the Gal 16v8 needed in the ADS interface.
do you have gal programmer? u can build one if dont have one, there is also schematic for gal programmer.

the file is archived with 7z .

[cipijoint]

by the way, i dont think will ever work without gal.
The schematic interface with max232 can work on bmw over 1995 , but under this year especial e34 , e30, e32, never ever.
if you need to buy some real ads interface, good quality and cheap price, can find in Poland.

[dimitar]

I use carsoft for models under 95 ,no live data no coding anyway you dont need anything more than carsoft . For gal programing you can use this home made programmer http://www.armory.com/~rstevew/Public/Pgmrs/GAL/_ClikMe1st.htm

[svid]

This scheme is a more modern ADS

[UDG]

This scheme is a more modern ADS

Is it for E30 Models too ?

[vagboy]

Can someone share pcb file for ADS interface ?

[dany72]

hi,I am interested for BMW diagnoses

[R0land_n]

What is ADS. I'm trying to obtain information about this system but there's not much availibal.

[colectionarul15]

Is it for E36,318is,M42 Models too ?
Work with INPA,GT1 DIS?

[79mac]

how much cost ADS interface for professional diagnose for INPA or DIS ?

[banstead1]

I'm an newbie and have been trying to work out the differences for programming BMWs using a laptop.

What I have worked out so far is:
1) ADS is an expensive BMW optical interface.
2) OBD interface is a 'cheap' method but not as advanced, but is also standard for many cars. So that is what I am looking at as there are plenty on e-bay using INPA/EDIABAS.

Using OBDI - you can use BMW DIS for diagnostics and SSS to do programming. However many forums suggest 'NCS Expert' as a simple tool for making simple changes to default car settings. e.g. enabling/ disabling Day driving lights. Anything more ADS is the way.

It would be good if a cheap ADS method were available.

[flint77]

- BMW EDIABAS: STD:OBD
- BMW EDIABAS: ADS
- BMW EDIABAS: D-CAN (STD:OBD K + CAN)
- BMW EDIABAS: JBE PT-CAN (STD:OBD + JBE CAN 500k)
- BMW EDIABAS: JBE K-CAN (STD:OBD + JBE CAN 100k)
the best interface
tieCAR.net Company - Products (http://www.tiecar.net/products.html)

[YEDI]

THX! finally I found this schematic and dump.
:proud::beer:

[FAL]

I'm an newbie and have been trying to work out the differences for programming BMWs using a laptop.

What I have worked out so far is:
1) ADS is an expensive BMW optical interface.
2) OBD interface is a 'cheap' method but not as advanced, but is also standard for many cars. So that is what I am looking at as there are plenty on e-bay using INPA/EDIABAS.

Using OBDI - you can use BMW DIS for diagnostics and SSS to do programming. However many forums suggest 'NCS Expert' as a simple tool for making simple changes to default car settings. e.g. enabling/ disabling Day driving lights. Anything more ADS is the way.

It would be good if a cheap ADS method were available.ADS is not an expensive optical interface, you're probably thinking of OPS/OPPS. The type(s) of interface you need to choose, depends on the year(s) and model(s) of BMW you wish to programme. There are many different BMW interfaces (and clone versions), that will work with Ediabas. The most common are:

http://i769.photobucket.com/albums/xx339/Dean_B/Capture.jpg

[VMatas]

PCD drawing, anyone?