PDA

View Full Version : Toyota Land Cruiser dashboard problem



djdansmart
17th August, 2010, 03:58 PM
Car is from 2002 diesel,dashboard is whit 93C66! After recalibration instrument from tahometer and mileages not work! Anybody have this problem?? I write original back up..same problem..i write a lot of dumps..same problem! Sometimes LCD from KM flicker..i dont know if instrument from tahometer and mileages work before..
Anybody know something? Thx for you time!

ernesto1670
17th August, 2010, 06:08 PM
You lift the 93C66?
Check the welds, there may be a bad contact.

djdansmart
17th August, 2010, 06:42 PM
I desolder the chip! Not readed in circuit! All soldering is ok..i`m not beginer!!

tachonow
17th August, 2010, 08:59 PM
Please post original dump that you ve read. Maybe bad readed then bad written.

djdansmart
18th August, 2010, 06:46 AM
This is original dump read it with Seprog! I try it other dumps sent by friend..same situation! I edit my dump..put al FF except KM row..same situation! Make it swap,try it all know solution..nothing changed! Like i told before,don`t know if both instruments work before..in my hands came only dashboard!

Ramzai
18th August, 2010, 07:54 AM
This is original dump read it with Seprog! I try it other dumps sent by friend..same situation! I edit my dump..put al FF except KM row..same situation! Make it swap,try it all know solution..nothing changed! Like i told before,don`t know if both instruments work before..in my hands came only dashboard!

What number of the dashboard? 83800-?????.

milesbetteroff
18th August, 2010, 10:00 AM
Hi mate look at the mileage encryption and check that all are the same if not edit them to match up this will fix it I have the same problem

tachonow
18th August, 2010, 10:04 AM
Forget it mate. The dash was damagged before. Its imposible not to work with original dump.

Ramzai
18th August, 2010, 10:20 AM
Forget it mate. The dash was damagged before. Its imposible not to work with original dump.

Dashboard from Yazaki, If dump is damaged, display will blink.

djdansmart
18th August, 2010, 11:16 AM
Dashboard from Yazaki, If dump is damaged, display will blink.

Sometimes yes blink(when take out dashboard and put it back)..but sometimes not blink..whit same dump! I put few dumps sent by friends..i put original dump (uploaded here)..same situation! Both indicator not work..

If my dump damaged..why don`t work whit other dump?


Maybe someone have dump from this car Land Cruiser 2002 diesel 93C66..but i think dash vas broken before!

Ramzai
18th August, 2010, 11:35 AM
Maybe someone have dump from this car Land Cruiser 2002 diesel 93C66..but i think dash vas broken before!

What number on Toyota? 83800-????? :banghead:

djdansmart
18th August, 2010, 02:43 PM
Don`t know..i don`t have here the dashboard now!

djdansmart
31st August, 2010, 10:02 PM
What number on Toyota? 83800-????? :banghead:

Number on back side is 769204-240! Still need help for this dashboard!

treo
1st September, 2010, 12:25 PM
Try with this dump

SDO
27th April, 2012, 09:17 AM
Guys
Could someone please give me a dump for LAND CRUISER 100 series, ( not prado ), 93c66 chip, 4.2 ltr turbo diesel , year 2004.

Please give me whatever landcruiser dump you have, diesel patrol, I don't care anymore, just the needles should move and mileage shows.

Thanks for ure help guys

DylanImmo
14th August, 2012, 05:28 AM
Dear Dk mate,who got Toyota prado series150 2009year dump.The dashboard after modify by someone.The mileage will not change and always stay at same number but other is working normally.
The problems is i no have original dump.