AUDI A2 1.4 TDI

[TWINGO]

Hi friends...
I've problem with AUDI A2 1.4 TDI (3 cylinders). I want remap it but my ecm drivers are wrong. When I open "boost x rpm" the value of rpm and load are abnormal. Somebody have a good driver or a good map for this car?
Ecu number is 0281010220 and software number is 1037360497. In ecm I can edit it with driver number 220_497.
Thanks...

[ipejasinovic]

What do you mean "abnormal"? All vaules in ECM are abnormal.

[edc]

Hi friends...
I've problem with AUDI A2 1.4 TDI (3 cylinders). I want remap it but my ecm drivers are wrong. When I open "boost x rpm" the value of rpm and load are abnormal. Somebody have a good driver or a good map for this car?
Ecu number is 0281010220 and software number is 1037360497. In ecm I can edit it with driver number 220_497.
Thanks...

stop playing with ECM and go to your local tuner ...

and please stop asking about free remaps becuase nobody who knows how to do the good remap won't attache it here for free ....

and my advice :
any free remaps attached on the forum have nothing to do with good chiptuning ...

[TWINGO]

Hi edc...
I'm 15 year old that I work with engines and I work in automotive world. My TWINGO have 200cv and I make it in 5 year of job. I'm not children...
I asked a favor and not an opinion!
Thanks...

[TWINGO]

What do you mean "abnormal"? All vaules in ECM are abnormal.

If you look RPM value and LOAD value, you can see that they are reversed. I think that there is an error. I search a driver that work good for ecm 6.3 version.

[ipejasinovic]

Only RPMs seems weird: 100, 500, 800, 900, 1.0, 1.2 ... 5.0, but this 1.0 means 1000 RPM, 1.2 means 1200 RPM, 5.0 means 5000 RPM...

[TWINGO]

Only RPMs seems weird: 100, 500, 800, 900, 1.0, 1.2 ... 5.0, but this 1.0 means 1000 RPM, 1.2 means 1200 RPM, 5.0 means 5000 RPM...

I've RPM value in orizontal and LOAD value in vertical. Then I have to edit map in reverse mode. But if I edit map in reverse mode and see a graphic editor I see a strange map. For me there is an error when was edited the driver for ecm. What do you think?

[ipejasinovic]

Everything is OK, same values in WinOLS...

[TWINGO]

What do you think? Driver was edit bad?

[TWINGO]

I've tried to remap... It work good...