DAS XENTRY ORIGINAL MULTIPLEXER PIC-DUMP

[Bigovic]

In the Newest Version 7-2010 DAS / XENTRY the Clone Multiplexer blocking, but Original Multiplexer working ....

Hier i have from my Labour use a Original Multiplexer and read the PIC DUMP so you can use in Chinese Clones and programming the PIC12CE519 maybe this will working!

IS A ORGINAL DUMP!

THIS INSTRUCTION IS NOT SOLUTION FOR NOT WORKING
MULTIPLEXER ONLY RESOLBVE THE PROBLEM WITH THE NEW BLACK LIST!

Instruction!

1. Open Multiplexer and on Relay Board 8 PIN SMD IC 12C519 (PIC12CE519)

2. Desolder with Hotair the PIC 12CE519

3. Use Programmer best Elnec i use Beeprog

4. Programing the PIC12CE519 with my Dump

5. This must Resolve the Problem and you China crep is
than a "original" multiplexer


Don?t forget THANKS

[mitkot]

Hello,

PIC12CE519 isn't it OTP (one time programmable)
So you mean buy a new one PIC12CE519 and program it with this dump?

Thanks for the solution and answer!

[Bigovic]

this Pic is not security locked, if you locked this so you can?t read and write. But you right is better always buy a New PIC12CE519 so you have a Orginal Pic and orginal Pic from China clone...

[etronic2]

Appreciate it. It will help many....

[bouboule2000]

Buy Pic and wait to delivery....:girl:

I have opened my clone today, very surprising to see printed boards by poor welds...:(

Worked by miracle my clone ...:eek:

[sosautomotive]

Buy Pic and wait to delivery....:girl:

I have opened my clone today, very surprising to see printed boards by poor welds...:(

Worked by miracle my clone ...:eek:


you are lucky this time, but not always

[morfeo]

and new pic from here!

MICROCHIP|PIC12CE519-04I/SM|8BIT CMOS MCU, SMD, 12CE519, SOIC8 | Farnell Italia (http://it.farnell.com/microchip/pic12ce519-04i-sm/8bit-cmos-mcu-smd-12ce519-soic8/dp/1196775)

[w202]

Hello. Sorry, I wrote in this thread, but I really need the key for old Xentry 05/2010. Can you help me.
LanID 0800024207F9
HW-ID 500F0F8A4AA1
AppID 252

[mercis]

Hello. Sorry, I wrote in this thread, but I really need the key for old Xentry 05/2010. Can you help me.
LanID 0800024207F9
HW-ID 500F0F8A4AA1
AppID 252CG6QUKH7ZZZR2UMKWZ2YJPVNNRPQLGLN6GFZEMKNPKYVH4F R6KVCGP258NTNZYHRQL3AV7GRJC64VKVT72R24MBJW42SSR25Q 7RFFBCPM5AD42N6MUUZHJCPPDQAUX32S6

[kool_mi]

thanks my friend BIGOVIC

[Bigovic]

@Hi All :listen:

This Document I have created from 2 weeks so that we can see the difference from: Original Dump and China Clone Dump.

You see in Red Color the Diference all other is the same in all 2 PIC 12CE519!

The First is Original the Second is a China Clone Dump.

The primary Target / working is find and Change so exact:
- Serial Number,
- Autorisation Level,
- Hardware Date and more,

so we know than and can Changed Serial, that the New Software can?t NEVER Blocking the Multiplexer!
and nothing more New FIX need (i hope)

Why?
If Daimler mean must make a Block List in the Newest Software so we can change the Serial of Multiplexer!

Best Idea is if you have a Original Multiplexer notice the Number (CEASAR SELF TEST) and Chnage in your Multiplexer this Serial hope than you are Happy.

Serial Number you can Change with a simple Editorm save and programming with a regular programmer for PIC IC.


Good Luck :-)


ADD. Document is in German writed use Translator!

THX are welcome:trytofly:

[Bigovic]

Buy Pic and wait to delivery....:girl:

I have opened my clone today, very surprising to see printed boards by poor welds...:(

Worked by miracle my clone ...:eek:

Buy a Blank PIC12CE519 and try it with this Orginal Dump!

Maybe this Help you!

[mitkot]

In my multiplexer there is no PIC12CE519.
Instead there is PIC12C509....
Is it the same?

[goldgear54]

how to fix it

[dimitar]

buy 12f519 and reprogram as long as you want

[lovelyirshad]

hi there is there any problem in the archieve or i have some problem in my computer becuse i download those file but couldnt open so please help some body
thanks

[bigdiez]

no problem with archive....open with WINRar...

upload again...

[diagnoza_auto2000]

In many multiplexer there is 12c509 i think the dump not match for 12c509 but we can edit the Sn inside and Autorization level .I will read one of D3 and one of D4 to see if somthing change.I will post here soon.

[weryo]

Teradyne and Actia developers are not blind at all!
At the moment of posting dump with not blacklisted multiplexer be sure in next release that mux number will be listed in bllst

And some of dealers will scream ,..without being guilty,..but blacklisted!

These things would be discused in private,..could you?

[morfeo]

Buy a Blank PIC12CE519 and try it with this Orginal Dump!

Maybe this Help you!


hi friend how configure this in beeprog?

[diagnoza_auto2000]

I have make one experience.
In one china mux D3 i have replace pic12c509 and i writed one dump from another china D4 mux with another serial nr.
Dump can be edited too there its no big difrence betwen china mux and original dump posted here.

Multiplexer D3 not work with dump from D4 (change only serial nr and autorization level)

I think there is another place too where is stored this information,and when are not the same will not work.

New version of Das will not rewrite the pic because is OTP!

Blacklist serial nr can be solved by software fix.

I atach here Caesar Self Test after dump from 12c509 was replaced.

Any help or opinion are welcomed!

[Bigovic]

how to fix it

Maybe this Help you!

- Use the 2 CAL FIX ERROR 872 and 9901,
- Setup
- Start New Your DAS

Good Luck

[Bigovic]

Teradyne and Actia developers are not blind at all!
At the moment of posting dump with not blacklisted multiplexer be sure in next release that mux number will be listed in bllst

And some of dealers will scream ,..without being guilty,..but blacklisted!

These things would be discused in private,..could you?

Yes are Not Blind, BUT if you check this Thread you find my Document: "hier you can see the Differents in HEX EDID from a Orginal PIC and Clone PIC in Multiplexer, the located Serial number, Authorisation Level, Software and more...:idea:
So if This Actia and Terradyne etc... thinks and setting this Serial in the Blacklist than make Serial Number self and you will not get Never Problems with the Software...:rock:

[weryo]

You are right

[junior.manager]

In the Newest Version 7-2010 DAS / XENTRY the Clone Multiplexer blocking, but Original Multiplexer working ....

Hier i have from my Labour use a Original Multiplexer and read the PIC DUMP so you can use in Chinese Clones and programming the PIC12CE519 maybe this will working!

IS A ORGINAL DUMP!

THIS INSTRUCTION IS NOT SOLUTION FOR NOT WORKING
MULTIPLEXER ONLY RESOLBVE THE PROBLEM WITH THE NEW BLACK LIST!

Instruction!

1. Open Multiplexer and on Relay Board 8 PIN SMD IC 12C519 (PIC12CE519)

2. Desolder with Hotair the PIC 12CE519

3. Use Programmer best Elnec i use Beeprog

4. Programing the PIC12CE519 with my Dump

5. This must Resolve the Problem and you China crep is
than a "original" multiplexer


Don?t forget THANKS


Alright my friend, my interface was blocked and no longer works if I change this chipi 13CE519 solves the problem?
:banghead::banghead:
You can say the best solution?

[junior.manager]

Alright my friend, my interface was blocked and no longer works if I change this chipi 13CE519 solves the problem?
:banghead::banghead:
You can say the best solution?

[diagnoza_auto2000]

Do you test it with old version with the fix ?
Wich is the result Caesar test?

[EduardNN]

[quote = Bigovic; 732683] В новейшей версии 7-2010 DAS / XENTRY блокируется мультиплексор клонов, но работает оригинальный мультиплексор ....

Теперь я из моего труда использую оригинальный мультиплексор и прочитал PIC DUMP, чтобы вы могли использовать в Китайские клоны и программирование PIC12CE519, возможно, это будет работать!

ОРИГИНАЛЬНЫЙ ДАМП!

НАСТОЯЩАЯ ИНСТРУКЦИЯ НЕ РЕШЕНА ДЛЯ НЕ
РАБОТАЮЩЕГО МУЛЬТИПЛЕКСА, ТОЛЬКО РАЗРЕШИТЕ ​​ПРОБЛЕМУ С НОВЫМ ЧЕРНЫМ СПИСКОМ!

Инструкция!

1. Откройте мультиплексор и на плате реле. 8-контактный SMD IC 12C519 (PIC12CE519).

2. Запайки с помощью Hotair PIC 12CE519.

3. Лучший программист Elnec. Используйте Beeprog.

4. Программирование PIC12CE519 с моим дампом.

5. Это должно решить проблему, и вы Китай креп
чем "оригинальный" мультиплексор Не


забывайте СПАСИБО [/ quote]

Увы, этот дамп не завершен :(
И работать правильно или не будет работать!
PIC12CE519 в мультиплексоре закрыт от ридера (читаются только первые 64 слова, а другой нет)
В PIС12E519 есть eeprom, недоступный извне,
я купил чип за 50 $, что изменит мой серийный номер и уровень авторизации ....

[EduardNN]

I have make one experience.
In one china mux D3 i have replace pic12c509 and i writed one dump from another china D4 mux with another serial nr.
Dump can be edited too there its no big difrence betwen china mux and original dump posted here.

Multiplexer D3 not work with dump from D4 (change only serial nr and autorization level)

I think there is another place too where is stored this information,and when are not the same will not work.

New version of Das will not rewrite the pic because is OTP!

Blacklist serial nr can be solved by software fix.

I atach here Caesar Self Test after dump from 12c509 was replaced.

Any help or opinion are welcomed!
I have a multiplexer D3 works after replacing the serial number and level of authorization from D3 to D4.

http://i9.fastpic.ru/thumb/2010/0907/79/51c08e3bccb28fb230889ee4f9c50e79.jpeg (http://fastpic.ru/view/9/2010/0907/51c08e3bccb28fb230889ee4f9c50e79.jpg.html)

[nguyennhatquang]

what is the benefit of authorization D3 vs D4
please tell me..

[diagnoza_auto2000]

Alright my friend, my interface was blocked and no longer works if I change this chipi 13CE519 solves the problem?
:banghead::banghead:
You can say the best solution?

You can try ,but i think will not work.

Post here Caesar self test sow we can see.

[EduardNN]

Alright my friend, my interface was blocked and no longer works if I change this chipi 13CE519 solves the problem?
:banghead::banghead:
You can say the best solution?
If you change PIC12CE519 to dump this topic then MUX will not work because dump is not complete.
I bought this chip (50$) with a different serial number and solved the problem (CAL 870), I think, forever, without any
software fixes.

[milanoffracing]

If you change PIC12CE519 to dump this topic then MUX will not work because dump is not complete.
I bought this chip (50$) with a different serial number and solved the problem (CAL 870), I think, forever, without any
software fixes.


Hey mate, in this post I see that you bought it for 50$. :reddy:

[milanoffracing]

Alas, this dump is not complete: (
And to work properly or will not work!
PIC12CE519 in the multiplexer is closed from the reader (read only the first 64 words, and the other not)
In PIС12E519 have eeprom inaccessible from outside
I bought the chip for 100$ that would change my serial number and the level of authorization....


In this post I see 100$ :thefinger:I think you're lying mate, this is not good.:boxing:. Interesting how you try to help people in other forums, maybe you sell chips.:motz:

[EduardNN]

Hey mate, in this post I see that you bought it for 50$. :reddy:Yes I bought this chip is sewn (PIC12CE519) for $ 50 and do not regret a single gram - second update (0910) and had no problems and unnecessary movements to address CAL870:)


In this post I see 100$ :thefinger:I think you're lying mate, this is not good.:boxing:. Interesting how you try to help people in other forums, maybe you sell chips.:motz:
My apologies, $ 100 a typo ....
Just bought two chips for two MUX


P.S.
It is not necessary for me :reddy: I'm not interested ....

[milanoffracing]

I think you did not understend my message, everything is simple mate, DON"T LIE people!!! If you want to help people you are welcome M8,if you want to sell something here you are in the wrong place.

[Pyrogekko]

thats right

[EduardNN]

I think you did not understend my message, everything is simple mate, DON"T LIE people!!! If you want to help people you are welcome M8,if you want to sell something here you are in the wrong place.do not sell chip, I have none!
I make something else ...

[diagnoza_auto2000]

Post your dump if you have a good pic.

[junior.manager]

I'm with my friends need this chip multiplexer blocked 12CE51904/SM may be a chip or similar?
What would be the chip to replace this?
know where I can buy this chip?
can someone send me to Brazil in the chip ready to replace it I apenaz

[EduardNN]

Post your dump if you have a good pic.
If I'd had a dump of the chip, would I buy
quilted chips???

[diagnoza_auto2000]

Ohh put in one programmer and read,its easy

[junior.manager]

CHIP I NEED SOMEONE CAN SEND ME TO BRAZIL?
MY MAIL IS ( no addys to be posted )
I buy the chip.
THIS SITE HAS JUST MICROCHIP|PIC12CE519-04I/SM|8BIT CMOS MCU, SMD, 12CE519, SOIC8 | Farnell Italia (http://it.farnell.com/microchip/pic12ce519-04i-sm/8bit-cmos-mcu-smd-12ce519-soic8/dp/1196775) BUY IT AND SEND TO ME I spent ADDRESS THROUGH THE MAIL.
AQU IN BRAZIL HAS this chip.

[junior.manager]

MAKE IT WORK DESK KG FOR VARIOUS PROGRAMS AND AS OF XENTRY EWANETE WIS EPC ME BUT THAT PIC ENVIEN 12 CE51904/SM

[casiopaya]

what is the diffenrenz betweem autorisation level 3 and 4?

[benztronic]

any news experince???? please post the difference a<nd the advantage between the author. levels.

thanks

[casiopaya]

i have xicor 76f041a chip in my original mux..
anyone an idea how to program it?

[diagnoza_auto2000]

i have xicor 76f041a chip in my original mux..
anyone an idea how to program it?

Make a picture and mark the cip.

[strda50es]

If you think it helps try it.

[diagnoza_auto2000]

If you think it helps try it.

Thanks m8.I have another model too if you need it tell me
This schematic seems to have some ic replaced by anothers chinese ic (ADM207,X76F014,xc9536 etc)

[strda50es]

A "NEW" one came also!!!
Blue one !!!!

[diagnoza_auto2000]

A "NEW" one came also!!!
Blue one !!!!

Nice one,its seems to be diffrent from anothers.
Max192BCW was replaced by another ic .
What is there?
Near the 5 zener diodes.

[strda50es]

Nice one,its seems to be diffrent from anothers.
Max192BCW was replaced by another ic .
What is there?
Near the 5 zener diodes.
Yes i know what you say but it is something new.
There was no such an IC in previous versions.
A friend send me the PCB picture.

[diagnoza_auto2000]

Yes i know what you say but it is something new.
There was no such an IC in previous versions.
A friend send me the PCB picture.

They modify a little the circuit to add that.
I think its a new type of MAX.
Somtime MAX192 fail and you see the voltage in DAS very low.:tee:

[strda50es]

They modify a little the circuit to add that.
I think its a new type of MAX.
Somtime MAX192 fail and you see the voltage in DAS very low.:tee:
Yes correct and sometimes it shows 24.1 Volts WHEN connected to PKW and Smart cars!!!
Will let you know more about this mux when i have the information i need.

[diagnoza_auto2000]

Yes correct and sometimes it shows 24.1 Volts WHEN connected to PKW and Smart cars!!!
Will let you know more about this mux when i have the information i need.

Thx m8,will be great cause i always repair mux evry types,sow new info its wrily wellcome.

[casiopaya]

i trye to read out the pic12ce512 of original mux
but it just read the first 6 lines.

does anyone have a full read of pic12ce519?

[strda50es]

i trye to read out the pic12ce512 of original mux
but it just read the first 6 lines.

does anyone have a full read of pic12ce519?
Hi friend.
I think that the member "bigovic" has the answer to what you are asking.

[Gregor30]

pic12ce519 emulated x76F041 (ori mux) ???.

[casiopaya]

how we can read out full x76f041a crack bypass or crack the software.
Or how we can read out pic12ce512 full???

[EduardNN]

100% working dump pic12ce519 with the Chinese clone.

[tehnosoftex]

100% working dump pic12ce519 with the Chinese clone.

But this one is banned in 2011 versions of xentry. It worth to try to combine the dump from bigovic and the dump from you.

[dimitar22]

Hello


I have one question is it possible to use my cardaq plus interface with das or Xentury software in order to diagnose MB trucks?

Cables are not problems i have pinout from interface and truck.

How to configure software to recognize this interface?


You can see the interface here

CarDAQ Plus (http://www.drewtech.com/products/cardaqplus.html)

[Gregor30]

100% working dump pic12ce519 with the Chinese clone.


More thanks

[umba]

100% working dump pic12ce519 with the Chinese clone.
Is this for D3 or D4 Mux?

[EduardNN]

But this one is banned in 2011 versions of xentry. It worth to try to combine the dump from bigovic and the dump from you.

I pointed out where that is in the dump.
Change the number to any which want!

[AlbertM]

hello . for C4 MUX not fiind solution ? dump

[tk500]

hello . for C4 MUX not fiind solution ? dump

C4 multiplexer dos not exist.
Maybe you dreaming for SDconnect dump.

[per2per]

is there any difference in dumps pic12c509A and pic12ce519?

[andrius]

100% working dump pic12ce519 with the Chinese clone.

maybe someone has the above full dump for share? many thanks :) or any other full dump? i have damaged mine :)

[andrius]

no one has it ? :)

[blazej1200]

Hi which cable use to connect the original multiplexer c3 to laptop dell d630 (com ) , maybe someone has a diagram of such a cable ?

[Maik67]

Hello!
I want to change the serial number
I read my dump
I recorded a new 12C509A
programmer writes all ok
C3 test fails
returns the old 12С509A
test ok
in the dump did not change
what is the problem
help

[Maik67]

Thank you! Mr "Bigovic", and all the participants of the forum PIC12CE519 firmware after processing works with PIC12C509A

[ELMACHT]

Hallo
This is Dump from Reseller for Vediamo .
PIC 12C509
398078

:single_eye:
for C3
:single_eye:
And this is from old working C3
398522

[cocutanu]

Hallo
This is Dump from Reseller for Vediamo .
PIC 12C509
398078

:single_eye:
for C3
:single_eye:

Useless...corrupted :)

[Dsan]

I appreciate this is an older thread but it seems that the supplied dumps are all mostly empty bin files with FF or the header repeated.
656569

so with this in mind, has anyone got a working dump of the eeprom that can be used? I'm going to dump one myself tomorrow but figured I'd ask first

[skymastor]

When I have the chance, I will take a look on my old laptop and see if the eeprom dumps are still there. If they are I will let you know.

[Dsan]

When I have the chance, I will take a look on my old laptop and see if the eeprom dumps are still there. If they are I will let you know.

Very kind, thank you!!

[Dsan]

658018
Interestingly today I tried to dump firmware off a 2016 C3 clone and it was copy protected, which is unusual. I also reached out to a few sellers about the possibility of selling a dump and the prices they want are a bit mad, $100

here's hoping someone has an older copy still lying around