change dvd drive help

[leeunwin]

hiya basicly ive got the open drive error wont read disks its a philips drive

can i buy a benq drive and simply attach it to my xbox use jungle flasher and flash with latest firmware will this render the benq drive to work??

ive only ever flashed a benq drive

[Matt08]

hi im fairly new but i think you can but I think you have to use your old drives key that u find on jungle flasher when u connect the drive

[leeunwin]

does anybody no if it makes a difference changing from a philips to a benq drive can you do that??? as ive found benq is alot eaiser to flash

[deffc0n]

No problem you must all work in JF and first read philips and next when get good key do spoof and write to benq.

[leeunwin]

yes but im wantiung to flash to new bwnq drive with latest fw...

do i do the above 1st then do the flash after ive got it working ie.. reading ie=riginal disks

[janobi]

Well from what I remember phillips make both the benq and liteon drives.

But you will need the key off the old drive, to put into the new drive, or it simply wont work. Also if your going to LT you cannot spoof the drive, so will need the same model as was already in the console.

[leeunwin]

right lol im pretty new to this stuff basicly what it is my drive is giving the open tray error grrrrrrr so what i want to do is change the dvd drive for a benq drive as thats the only drive i no how to flash the current drive is a philips drive ive tried to flash this to see if it was a firmware error on the drive but its not finding it in jungle flasher and i doubt it would have sorted the open drive error anyways

[cgscott]

Take the drive out and look at the sticker on the top of the drive. The revsion of the drive is on the bottom left hand corner of the drive.

[yysnet]

Basically, the CPU will read DVD key from dvd drive when booting up. If the Key is not paired to the CPU then CPU will not execute any game from that drive.

So if you want to fix any dvd drive, easiest way is to change the laser. Because the DVDKEY is stored in the controller board, not the laser head. However if you need to change the drive to different model, you need to use JF or other way to read the original DVDKEY and write it to new one, and with correct spoofing (i.e. make the CPU think your dvddrive is the original one)

[Scrumpy J]

Youtube is the best way to get the info your after if your unsure what to do... loads of vids on there...

99% sure you can flash \ Spoof Keys a BenQ without using any probe, but any liteons need additional hardware to do the job, within windows anyway, not sure if they can be done in dos without them...

Good luck

[leeunwin]

RIGHT THIS IS WHAT IVE GOT LOL

I HAVE A XBOX 360 WITH THE OPEN TRAY ERROR!!!! ITS A PHILIPS DRIVE


IVE BOUGHT A NEW HITACHI DRIVE WHAT DO I NEED TO DO TO GET THE HITACHI DRIVE TO WORK IN MY XBOX CHEERS LADS IN ADVANCE