old skool

[nabzo]

here's a question how do I turn back the mileage on analog clusters?

[vageric]

i use 2 small screwdriver.

[pinky1970]

i have a great way with gas soldering Iron works a treat, what model of car and year.

[dimitar22]

i use 2 small screwdriver.


This is the best way.

[nabzo]

and hw do u use them the 2 small screwdrivers

[seano123]

yes use 2 tiny screwdrivers and get some to roll dial to required number (dont scratch anything tho lol)

[nabzo]

i guess this is hard to do

[Autotecno2006]

look at the end of the dial, opposite end to the gear, c copper washer, slide back, adjust tumblers as required & then slide back washer but not to tight, job done ok.

[nabzo]

i will try this tomorrow

[drivergabriel]

i need dash dump for opel manta 1984. thank you in advance! and wich tool i must use? b or c?!?

[pinky1970]

To much hard work, take clock out dash. get the speedo at one end will be the gears, be carefull they break easy. there is the metal shaft that runs through from one end to the gears.

Heat up gas soldering and press it on the end of the shaft and pull with the other end where the gears are with grips, about 10mm. you can then adjust to what every mileage you want, then simply pull back into place, a little abit of heat job done, any motorsthey all work the same way.

[drivergabriel]

aha...:joyman: