clauberty
22nd August, 2010, 06:38 PM
hello
i need milage cange in bsi siemens with 95256 to 120
car is 1.6 hdi
in the dash i change from 180 to 120 hope is ok
thanks
the below example is not working
BSI type #1
In the BSI put FF's as shown here: car start but no change in km
01C0: xx xx xx xx FF FF FF FF FF FF FF FF FF FF FF FF
01D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
01E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
01F0: FF FF FF FF FF FF FF FF FF FF xx xx xx xx xx xx
BSI type #2
In the BSI put FF's as shown here: car not start
0270: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0280: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0290: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
In the BSI put the bytes as shown here: car not start
BSI type #3 (95256)
0260: xx xx xx xx xx xx xx xx xx xx xx xx xx 00 xx 00
0270: 00 00 xx 00 xx 00 00 00 xx 00 xx 00 00 00 xx 00
0280: xx 00 00 00 xx 00 xx 00 00 00 xx 00 xx 00 00 00
0290: xx 00 xx 00 00 00 xx 00 xx 00 00 00 xx xx xx xx
i need milage cange in bsi siemens with 95256 to 120
car is 1.6 hdi
in the dash i change from 180 to 120 hope is ok
thanks
the below example is not working
BSI type #1
In the BSI put FF's as shown here: car start but no change in km
01C0: xx xx xx xx FF FF FF FF FF FF FF FF FF FF FF FF
01D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
01E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
01F0: FF FF FF FF FF FF FF FF FF FF xx xx xx xx xx xx
BSI type #2
In the BSI put FF's as shown here: car not start
0270: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0280: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0290: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
In the BSI put the bytes as shown here: car not start
BSI type #3 (95256)
0260: xx xx xx xx xx xx xx xx xx xx xx xx xx 00 xx 00
0270: 00 00 xx 00 xx 00 00 00 xx 00 xx 00 00 00 xx 00
0280: xx 00 00 00 xx 00 xx 00 00 00 xx 00 xx 00 00 00
0290: xx 00 xx 00 00 00 xx 00 xx 00 00 00 xx xx xx xx