PDA

View Full Version : VW Jetta 2008 cluster swap (micronas cdc3217)


hdm77
22nd August, 2010, 11:30 PM
Hi Guys,

I would like change the cluster in my Jetta 2008. But I don't know the pin from the old and new cluster.

It's possible to change the cluster and correct the mileage?
Can anybody help me?

Old: 1K0 920 864A
New: 1k0 920 974A (micronas cdc3217g)

Thanks,
Janos
z786
23rd August, 2010, 12:53 AM
im afraid you'l need the pins mate
hdm77
23rd August, 2010, 03:02 AM
im afraid you'l need the pins mate
how can I read it from the clusters?
z786
23rd August, 2010, 03:19 AM
you need a professional tool like enigma,arbritus etc if you wanna do via obd, or xprog if u wanna do manually
hdm77
23rd August, 2010, 01:43 PM
enigma and arbritus is very expensive :-( if I buy xprog, the eeprom must be solder out from the cluster? Mileage state can be update with xprog?

Thanks,
Janos
tachonow
23rd August, 2010, 01:47 PM
Swapping dashes with immo5 can be done only by copying all immoblock from old dash and then write to the new.
I didnt heard about any tool which is able to do that in another way.
exe123
23rd August, 2010, 01:48 PM
you don't need to remove the eeprom but you have to lift 2 pins on the micronas. just do it if you have very good soldering skills.
hdm77
23rd August, 2010, 03:45 PM
Swapping dashes with immo5 can be done only by copying all immoblock from old dash and then write to the new.
I didnt heard about any tool which is able to do that in another way.

can I do this with xprog? If not, please tell me the name of the sw.



you don't need to remove the eeprom but you have to lift 2 pins on the micronas. just do it if you have very good soldering skills.

I'am very good in soldering :)
I have buy the cluster eight months before this, and nobody can change here in Hungary :( if this is only one way, I will be carefully
tachonow
23rd August, 2010, 06:43 PM
Original VagDashCan or AVDI Abritus.
exe123
23rd August, 2010, 07:38 PM
If you have rosfar I can help you with immo and km on the new dash. what is date of the old dash?
hdm77
23rd August, 2010, 08:29 PM
If you have rosfar I can help you with immo and km on the new dash. what is date of the old dash?

R250? clone or original?

I have here only the new dash (micronas cdc3217g, ee 24c32wp) 2006.08
the old dash is in the car, i get it out morning and post here the data.

Thanks, Janos
exe123
23rd August, 2010, 08:49 PM
Yes, R250 clone is fine. Send me the data via PM and I will let you know how to proceed.