SPEED LIMITER MERCEDES SPRINTER

[CIRCUIT.FR]

HI

I would like know if i can disable speed limiter for MERCEDES SPRINTER 519 3L CDI 190CV 10/2009 ecu 0281016102.
If Yes, how i can desable this?

Thanks

[BeianM]

Have you read http://www.digital-kaos.co.uk/forums/f175/ecusafe-cracked-139846/
it may help you.
Speed limit removal (http://www.ecusafe.com/html/speed_limit_removal.html)

[CIRCUIT.FR]

OK

How i can read this ecu?

Thanks

[papalos_]

OK

How i can read this ecu?

Thanks

The easiest way is to find someone with STAR developer.

[lovelyirshad]

you can't read ecu by star developer

[papalos_]

you can't read ecu by star developer

I know that, but you can increase the speed limiter!

[CIRCUIT.FR]

I know that, but you can increase the speed limiter!

how i can increase it?

[AyceeDeeCee]

Using Star Developer you can adjust it in the cluster.

Cluster takes priority over ECU.

[papalos_]

Using Star Developer you can adjust it in the cluster.

Cluster takes priority over ECU.

To increase speed limiter via DAS developer you have to change values in engine ECU. Not in instrument cluster.

Hope this helps.

[mercis]

om642 not possible

[CIRCUIT.FR]

Hi

I have read ecu.
here original file.
Could you give me original speed limit?
And how i can modif this.

Thanks

[CIRCUIT.FR]

Could you give me value of speed limit original?

[diimon]

how you read this ecu?

[CIRCUIT.FR]

With CMD flasher obd

Thanks

[crackintosh]

readed dump is broken (only flash) - can't be exported!

[Techhead]

Hi, I to have been trying to remove the limiter on the 906 model, as an experiment i carried out a reading, then lowered the speed limit which you can do with Das without the need for scn coding, then carried out a seccond reading and then compared the two images, there was no difference, thus the limit can not be controlled by this memory.

If you find out any more or how to do it with dev i would be interested to know.

Thanks

[mercis]

read ecu,i think ecusafe can it unlock

[Remapking]

Hi Guys, My friend has a 2007 sprinter W906, the van was limited to 75 mph, Someone conncted DAS to the Van to try to remove or increase the limiter.. Since connecting to the instrument cluster and going to adaptaions the Van is now limited to 56mph.. (without making any changes)

There is no option in das to change it, there is a field which says 90kph, but DAS does not allow to change it, and a message regarding EU regulations appears..

I have flashed the ECU with original stock file - no change still 56mph..

We need to either go back to 75 mph or remove limiter

any advise would be great

PS I have ECUsafe, which processed the file, however im not too sure if ECUsafe file will be good - as i mentioned earlier the stock ECU file did not cure the problem (ie VAN still at 56mph and not back to 75mph)

[gog]

it can be done with das developer not need scn and nothing ellse.

[testariauto]

it can be done with das developer not need scn and nothing ellse.
CAN YOU TELL US THE PROCEDURE?
THANK YOU

[Remapking]

update: After connecting Das again and going into Engine ECU adaptation again, the speed is now restricted to 26mph!!! It seems DAS will only lower the speed limit.. I really need to increase the limit back to 75mph.. Is it possible to increase with DAS??

Any suggestions welcome guys

[figo95]

contact me i have this files!
you want remove speed limit or apply other ?

[charlie-h]

To adjust speed limit with developer you need to find HGB in CR.
Once in here its a drop down box to set your value.
Dont go higher than 161 kph as this is the max for sprinter
Have a go !!

[pocinas]

Hi There. So how is solution at the moment. I know Last post is dated 1st April 2011 (today 2019)

Have little problem with Sprinter W905 2013y (Ecu Delphi CRD2-OM651), speed limit is switch off in ECU, and works, but just works when manulaly press Acceleration pedal than can drive maximum 100mph, when want use Cruise control speed limit is still 70mph.

[pinguin]

To adjust speed limit with developer you need to find HGB in CR.
Once in here its a drop down box to set your value.
Dont go higher than 161 kph as this is the max for sprinter
Have a go !!

Correct, in cdi, developer daten, varianten, first valuelist, somewere on the bottom 1 value change from 89 to 161 with some additives, confirm.

if works thx to charly h
charlie-h (https://www.digital-kaos.co.uk/forums/member.php/80261-charlie-h)